Reviews
Can also be installed on CROSS CUB50!
If a rear box such as GIVI is attached to the rear carrier (cargo bed) of the CROSS CUB50, it will be too tight when the backpack is carried on the back.
So we purchased the Rear Carrier in the hope that we could extend it additionally.
The applicable model was CROSSCUB110 Year:18-21 Model:JA45, but it is expected that CROSS CUB50 (Model:AA06) will also be attached.
No instructions are included, but it is as easy to install as it looks.
We were able to install it on the CROSS CUB50 as expected.
The steel carrier is a round bar, so the mounting base of the Rear box can also be attached.
We were able to install a GIVI Rear box on the extended cargo bed.
The backpack no longer interferes with the rear box, improving comfort and load capacity.
View detail
Recommendation for those who want to increase the loading capacity as well as Tandem
I purchased this for CanTwo which also serves as Tandem.
I was looking for something simple and compact, not too large.
Good to be able to move the caRear box even just a few centimeters.
There are only a few places to install it, but I think the Access to it is Large strange.
In particular, the OEM carrier needs to be shifted to align the screw holes, and the air cleaner cover needs to be removed to loosen the bolt on the suspension, and part of the cowl needs to be removed to do so.
Still, once you can remove it, the rest is easy, so if you are confident, you should have no problem.
I am dissatisfied that the price is a little high for the product, but the quality is quite good, so I am satisfied overall.
View detail
Fits: YAMAHA BirdCity, YAMAHA BirdCity 155, YAMAHA Tricity155
Not compatible with Givi.
It is good because it is normally usable, normally durable, and less expensive than famous Manufacturers.
But one drawback, or something to watch out for, is that
They are not compatible with Givi.
Givi and Kaeppa also have interchangeable mounting bases, so you can change only the box to suit your touring needs.
When I attach a WorldWalk box to a Givi base, it fits, but the bracket that holds it in place does not fit properly, and I can't get it to stay in place.
When I set the Mounting Base to WorldWalk, Givi's was still not working.
Then, remove the SpacerRubber from the base, attach the box, drill a hole from the bottom, and pass the bracket for the corrugated plate through it.
Just close it with Screw when you use it, and you are done. It should not come off easily.
View detail
Ideal for camping
DUKE has GIVI 42LSquare Type, but Jig150 has this one.
The brand feeling and texture are not as good, but you can probably buy a large one for 5000 yen or cheaper.
The drawback is not the box itself, but that if you attach it to a daytonacarrier, the tandem rider will become narrower unless you extend the carrier.
Good point.
According to the manufacturer's explanation, the lockable system by simply closing the lid will cause damage to the carrier and other parts of the car. So I tried to push the lock like GIVI once, but it was difficult and annoying.
So, this revived ability to close and lock the lid is extremely convenient!
If you do, don't forget to lock it so you don't leave. (Lol)
View detail
chic impression
I installed the Takekawa Pillion Seat on the Rear Carrier, so I introduced this Carrier to load the luggage.
Installation is easy because there are only 4 screws.
I also removed the rear suspension, grease up the upper and lower rear suspension mounting shafts, and retighten them at 1G.
Steel rod welded structure and black glossy paint, subjective, but if the vehicle color is Blue or Black, Carrier will not stand out badly and will give a chic impression.
We also have Seat in Black, so it might be a bit plain.
It has a load capacity of 5kg, so you can install a Large Box. In fact, it is well made.
It's a little bit ugly because the front part is long and it's sticking out from the upper mount of the rear suspension, but it's not noticeable thanks to the black paint.
I've been using it for a while now.
View detail
Perfect for PinionSeat and CarRear box installation at the same time!
I bought this for PinionSeat and CarRear box at the same time.
I was able to use the Universal Bracket from the GIVI box.
View detail
Easy installation
Easy to install
The OEM Carrier has a separate box (fishing box) and always has a raincoat or something in the back. Purchased for the reason that I want to keep the things I want in a box at all times and move them around.
It's a shame that the only color is Black, I would have liked to see more colors like Silver and others available But....
However, it's also very easy to install and I recommend it.
View detail
Fits: HONDA CRF250 RALLY, HONDA CRF250L, HONDA CRF250M
It's exactly as described, but..
Both the Carrier and the Box can be firmly attached to the body of the car and the accuracy is good
Some of the models in the Instruction Manual seem to have been affected by the Bolt (50mm) is too long to hit the Cowl, so a short (30mm) I bought four more bottles
If it sounds like it's as described, it is, but Quantity:Since it's a "set" product, I'd like to see a product that fits the set, including the accessories
View detail
It wasn't a bad product, but it was just like the rest of the imprints
As noted in other imprints, the accuracy of the upper part of the U-shaped part that co-tightens with the Damper is not as accurate as it should be It's not good, or it interferes with the Frame and welds
As the product itself is well made, I would like to see it improved by listening to the voice of the users of this kind of in-play games It is
View detail
Fits: HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1300 Super Four
At last
CB1300SF (NC40) I've heard that the Carrier can't carry very heavy items because of the strain on the mounting area of the Carrier I did
However, with SeatBack, Helmet and Gloves etc...every single one of them is in the Holder Ha From now on, ease of use will be enhanced by easy storage
View detail
Stylish and practical
I bought this car 12 years ago The Kawasaki OEMOption Rear Carrier was installed almost simultaneously with delivery As it is a plating product, I have always taken care of it to maintain its shine, but over the years, I have found that it has become a very popular choice The rust has come to float around a lot I decided to buy a new Carrier I wanted to get rid of the Classic Carrier (but why the DAYTONA? ESTRELLA Did you release a new product after production ended? I'm glad to see it, but I chose this product with a black paint job and a thin frame that is hard to stand out Twelve years have changed the human psyche as well, and in the beginning, we had a lot of plating to do I've gone from dreaming of a Custom to a preference for a casually shiny, austere Motorcycle This is also the reason for the choice The installation is done with the Rear Suspension Bolt and the Fender Quantity Bracket Mounting Bolt:Pair (for Left and Right) It takes only 15 minutes to put the Bolt back on after removing the Carrier and KIJIMA's Bag Support, both of which are on top of Carrier's It's a custom seat, so it's not very helpful It may not be, but the Seat and Carrier are now face to face, and just looking at them, the load stability has increased With the pipe coming outside of the Fender Bracket, you can see that the Center There are more places to hold on to when hanging the Stand and when maneuvering the car after getting off the vehicle Although it is not so heavy, it felt much lighter because of more grasping points It looks like an extension of the BlackFrame of the car body and has no discomfort As I mentioned before, it's also good that it doesn't have a strong influence on the appearance because it's made of thin pipe I knew before I bought the Carrier that there was no part of the box to hook the rope Is the main focus on wearing it or is it a design issue? I usually use the Rubber Rope for Motorcycle and it's not very convenient for me But if you use the Moto fizz Hook belt and VHook, which I bought at the same time, you will be able to use a rope for loading your bike It is also possible to use this product It is a great product that has both practicality and design, but there are some roughness in the paint I would have given it 3 stars for quality View detail
Fits: SUZUKI Bandit 650 (GSF650), SUZUKI Bandit 1200S, SUZUKI Bandit 1250F, SUZUKI Bandit 1250S, SUZUKI Bandit 1250, SUZUKI Bandit 650S (GSF650S), SUZUKI Bandit 650 (GSF650), SUZUKI Bandit 1200S, SUZUKI Bandit 1250F, SUZUKI Bandit 1250S, SUZUKI Bandit 1250, SUZUKI Bandit 650S (GSF650S)
As I go back to Long touring, it's getting heavier to backpack
Going to Long touring makes me tired in Backpack
I can not even buy a little souvenir
I was looking for a Rear box.
Since other manufacturers are separately sold with carriers, pedestals, and boxes
I was giving up because I could not buy it within my budget.
If you are looking casually, what if you have! There is a RearBox set by car type by cheap!
Order with haste again. I came earlier than expected due date. Mr. Webic, Thank you very much.
I read the comments of the seniors and bought Bolt, Nut etc. by saying that Bolt is long. The key seems to be insufficient in intensity, so I made a key key. Because the key is astringent, I put a lot of silicone spray in the keyhole and the circumference of the key became smooth as well. Because it is raining, I can not affix it to the car body, but I expect it
There are unavoidable places because the price is Reasonable
View detail
If it does not fall
Fall indeed during a commute after installation. Even though we confirmed lock confirmation during installation, we went blown away. I do not know if the road that I ran and I was not sure what the lock part of the uneven road was sweet has fallen. Since it can not be helped it is necessary to drill additional holes and tighten it with Base with Bolt so that it will not fall.
Also, key cylinder key is not good. Since it does not enter straight, it must enter from a little diagonal. I do not put valuables, so I will not apply a key, but I am a bit worried that the lid will not open during running.
Overall design and exchangeable Smoked lens are bundled etc. It is satisfying because the feeling attached is not covered with others. Matte inside is also thick and comfortable.
I think that it was a perfect item if it did not fall.
View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
I think it's good.
Purchase motive
- I would like to put some luggage at MT-07. I want to use the existing BOX. I want to put a helmet in a keyed place. It is a motivation that I do not want to worry about luggage when it's raining.
Reason for making this item
- The dedicated Carrier sold for loading MT - 07 's luggage will be attached to the back of the Tandem seat. Also, when the BOX is installed, the back comes out and it looks like it looks (appearance) I do not want to become a dasay style. I think that Style has no tightness of Motorcycle anything.
I think that a person riding in Tandem is necessary, but because I ride alone, dedicated carrier is rejected.
- For dedicated Carrier installation, reason for requiring processing of the vehicle is also reason.
I do not want to work with Wazawaza and hurt Motorcycle.
- Selling price is as cheap as possible, I want supplies that can reuse existing BOX.
There is not too much what I think is this even if I search for Net
I was planning to make a fixed Bracket by myself using the mounting Bolt part under the Tandem seat, but perhaps there was a thing matching the image of my commercial on the market, a person with the same idea Thinking that it was a pair, if you were looking for it without giving up, this was on Parts of Wae Big, I thought it was this at first glance and did not hesitate to purchase it.
I am currently using it.
- The delivery was a post office. No problem separately.
Packing condition is good, product. Inadequate content of parts etc.. None.
- Body status
Since welds are strongly penetrated, they melt in well and do not come off.
- Mounting on the car body
Included BandQuantity : 1 Set of 4pcs. But 07 was installed with 3 pieces
Body products are not attached directly to Seat because they are essentially irons.
Between, we are putting thick Rubber sheet and Sponge together so we are processing it so as not to hurt Seat of Motorcycle.
Since there is originally a Mounting Base in the BOX to be installed, it was possible just by installing the Base in the processing hole of the purchased item with Bolt attached.
Finally, this product, if the width of Seat matches, I think that there is universality and I think that it can be utilized for various Motorcycle. It was a purchase of a lost question but it was a correct answer. After installing BOX
I like Style when looking at 07 from the side.
* Can you recommend this product to friends and acquaintances? ⇒ YES! Recommendation is possible.
View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
I think it's good.
By MT-07, even a little, I translated the purchase of this product because I wanted to put on my luggage
- Carrier dedicated to loading MT - 07 's luggage is located behind the Tandem seat. Also, when you install a BOX, it looks (appearance) Became a Dasy Style, there is no tightest Style.
I think that a person riding in Tandem is necessary, but because I ride alone, dedicated carrier is rejected.
- For dedicated Carrier installation, processing of the vehicle is required.
I do not want to work with Wazawaza and hurt Motorcycle.
- Selling price is as cheap as possible, I want supplies that can reuse existing BOX.
- While thinking of making a Bracket using the installation Bolt under the Tandem seat by myself
But, perhaps, it is thought that there is a person who has the same idea on the market that matches my image
If you were looking for various things, this was on Parts of Wea Big, at first glance it is this thought
I purchased without hesitation.
I am currently using it.
About impressions and installation of items
It is itself a Stainless Steel item. In addition, Size is two types of Large and Small.
Since welds are blended in with a strong penetration, they do not come off.
On the contrary the voltage is too high. It is sturdy.
Mounting on the car body is included BandQuantity : 1 Set of 4pcs. But 07 can be installed with 3 pieces.
Since BOX originally has a Mounting Base, Base is attached to 4 holes in the purchased item with Bolt attached
Can be installed only.
Since purchased items are not necessarily iron types, they are not attached directly to Seat.
In between, we have a thick Rubber sheet and Sponge, so we will not hurt the original Seat. Finally, I think that this product has universal nature, if it meets width, I think that it can be utilized for various Motorcycle. It was a purchase of a lost question but it was a correct answer. After installing BOX
I like Style when looking at 07 from the side.
View detail
Fits: HONDA Forza300, HONDA CB500X, HONDA CBR500R, KTM RC390, KTM RC125, KTM RC250, KTM 690DUKE R, KTM 390DUKE, KTM 690DUKE, KTM 250DUKE, KTM 200DUKE, KTM 1290 SUPER DUKE R, KTM 125DUKE, KTM 1190 RC8, TRIUMPH Thruxton, TRIUMPH TIGER SPORT, TRIUMPH STREET TRIPLE R, TRIUMPH StreetTwin, TRIUMPH STREET TRIPLE 85, HONDA SHADOW SLASHER
It is necessary to take measures against scratches, but it can be installed cheaply and easily
Feeling of use
As expected, it is sweeter than Bolt stoppage to Carrier, so if it is a box with a horizontal width, it will become more severe for the unbalance of luggage etc.
However, it is fixed more firmly than expected, and there is little wobble.
I am wearing a box named B 47 of GIVI, but I think that the box width up to about 30 L is about 40 cm, so I feel that the feeling of use does not change from the one fixed to the carrier.
About mounting
As this product is once taken BALI, I think that Seat will not be scratched immediately, but if it fixes, the Gold genus part will be strongly pressed against Seat, so long term use and heavy luggage etc If you post it probably Seat will be torn.
Also, since the width of the item is narrow, Belt for fixing also goes to Cowl
To be strongly pressed, Belt's rubbing measures are also necessary.
For the wounds of Seat I will fold the micro fiber toowel for washing for Vehicle for the time being.
We have not taken countermeasures concerning Belt's rubbing, but we plan to paste a scratch prevention Seat on the Cowl side.
View detail
I installed it in PCX 150.
Installation time, children do 30 minutes.
In pcx 's Carrier and Box' s Set, Box is Universal and Carrier is for pcx? There are Instruction Manuals for each and they are kind.
Carrier seems to explain for old pcx, it seems necessary to drill to install Bolt to fix Carrier, but the new model can be installed just by removing Cover.
The Carrier itself is easy to put on as long as 10 minutes.
Just because Carrier's Bolt has a long Spacer, Carrier itself is in a high position so it's somewhat misshapen. (Since it has meaning for the installation of UniversalBox, it can not be helped)
Box is a Type that can attach Base to Carrier and fix Box. When unnecessary it can be easily removed. Base is attached with the included Screw, but for many minutes it is Universal so Screw is long!
Parenthesis to pcx It is good to change Screw and Spacer to short ones.
There is also a sock inside the Box and is kind. I think that adding additional LED lighting will be helpful for putting out luggage at night.
I bought a box for the first time so I can not compare, but I think that I was happy to buy it.
Pcx has a small amount of Helmet in part.
View detail
Cospa best
Very good, solid Carrier and Rear box.
However, since Carrier's installation Bolt & Color is too long, the height of the front and rear are not matched, and a gap can be formed. I cut the color so that it would be my favorite height, and installed it with the hand Bolt. Also, fixed Bolt of Rear box mounting Bracket is abnormally long. As long as the Instruction Manual can be disconnected if it is long, but how is it. The length doubles but it is badly seen. Since it can not be helped, also use this Bolt Cut.
The goods themselves are very good, the cospa is the best.
View detail
Large doubles as Small
I attached it to PCX 125.
I thought that it was a bit Large, but I thought that Helmet in is Small, Rear box, Large is doubling as Small I made this product.
I tried using it, I think that it was good to make this Large Kimono.
View detail
[Webike Monitor] 2012 model Taiwan CYGNUS was equipped. attachment was also easy and it has equipped with it easily. I think that it is a Level which is satisfactory also as for intensity.
[Webike Monitor]
2012 model Taiwan CYGNUS was equipped.
attachment was also easy and it has equipped with it easily.
I think that it is a Level which is satisfactory also as for
intensity.
View detail