Reviews
Installed on a KTM, unfortunately the ScreenBody was scratched.
The product was packaged well, but still had some scratches from transportation.
Bracket is also stable if tightened firmly.
However, you must be prepared to get the Clamp's tightening scar on the Handlebar.
View detail
Expect a rainy day
I haven't used it in the rain yet, but it is less susceptible to wind.
I had a hard time installing it with one person (the only one available), so I recommend at least two people to do the job!
View detail
Nice, pretty but does not go perfectly on the vmax
in transparent beautiful piece. a little wide for the 1200 vmax you have to force and therefore bend the plexiglass a little Very sensitive to scratches clean well with a clean soft cloth. -------------------------------------------------- -------- in transparent beautiful piece. a little wide for the 1200 vmax you have to force it and therefore bend the plexiglass a little Very sensitive to scratches clean well with a clean soft cloth. Powered by Google Translator View detail
The wind seems to have eased up a bit.
When I drive lightly on the mountain pass road, I feel that the headwind is eased a little. If you ride at high speed for a long time, you can expect the effect. Personally, I'm disappointed with the look of the Motorcycle, so I may remove it after I've had some fun with it.
It is very easy to install, if you have a DUCATI Sport1000, you can install it without any adjustment, because the clearance of Meter and Nut is very close.
View detail
It is a Universal Product
When I put the Tachometer on, I thought it would not look good as it is, without protection feeling installation 。 It's Universal, so Hand Bent is hard to do 。 Particularly, Vise is needed for angular alignment of Visor and Bracket 。 Bad paint job on Bolt/Nut View detail
Accuracy is not good
The accuracy is not very good
If you follow the Instruction Manual, you'll find that Screen is quite Quantity:Pair (for Left and Right) It was non-targeted and distorted I thought it was strange, so I took it off and tried to put only the mounting Bracket on the body of the car and there it was When you put the Screen together, you can see that the holes of Bracket and Screen are positioned horizontally at 2 the screen is distorted It can't be helped that Screen is distorted if you put it on like this
It was a waste of time, so I attached only the bracket to the body of the car, and the holes in the bracket and Rotate the Bracket to fit the holes on the Screen, then press the Screen The screen is no longer distorted Screen is no longer distorted
The wind-blocking effect is in its own way, because the length of the Screen itself is in its own way The meter cover is pretty much covered, but the wind seems to be blowing off quite well
View detail
Didn't fit
I knew it may not work, I just wanted to give a try, well didn't work this time. Since it has slightly different front shape, it didn't fit. View detail
Fits: YAMAHA BirdCity 155, YAMAHA BirdCity, YAMAHA Tricity155
It's not bad
The windproof effect and looks aren't bad, but the quality and durability are worth the price
When I left the body cover on during the hot season, it was bent by the weight..
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300, HONDA Rebel 250
Not much …
I bought Clean's Short this time, but it's not as effective as I thought it would be I hope it was good
However, it was good for Dress-up
View detail
Fits: YAMAHA BirdCity, YAMAHA Tricity155, YAMAHA BirdCity 155
It may take wind more than I thought..
Will it become a comparison with the use of FUSION 's Long Screen on the front car, I did not get the windbreak effect I expected.
I feel the wind quite a bit in BALIBALI. (Lol)
View detail
Attachment degree
We are attached to VTR 250. I also added a hand guard at the same time, so I do not know yet, but the fastest speed fell a bit. I expect that it will become warmer, remove the hand guard and extend the maximum speed. View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300, HONDA Rebel 250
Finally Screen was attached
Because I bought it in the spring, I thought that I do not need Screen yet.
Running at this time seems to have quite a wind effect, so in this case I looked for something good, and OEM was so expensive that I purchased this item.
I will do Impression on my attention point in a little installation.
First of all Bracket has many scratches, someone was written. - - - - - It was launched to Webby
1. First of all Screen temporarily holds Bracket
2. Spread a little Bracket on the Fork side by hand (Inside I roll a Rubber) Is included
3. Position BracketBody by placing cloth on Clamp (R, L) - - - Mark 50 mm from the top
4. While aligning Screen with ForkBracket and Light, Quantity : Pair (for Left and Right) Apply the same height so that
5. We will further tighten up each part
6. Check the final confirmation and check if there is any fun place to complete
I watched it while running, but it seems like I got hit by the wind even a little Short.
Although the product is Short, I do not know if Long was good, but I thought the resistance was low.
Although I recommend you to "Yes", installation is quite a hard work, so it is to those who can prepare and install.
View detail
I guess it's okay.
I think whether it is impossible to adapt the TT 250 R raid. Although I actually installed it, I think that it is better to stop buying thinking that it will be attached as it is. It is better to recognize it as a general-purpose product. I think that it is fine if only one round round eye lamp is good, but because the stay of the aluminum disturbs the raid. Screw the visor's stay between the light and the stay, align the screen and bend the stay until the bolt position is aligned. Although bending the stay does not fit perfectly, bend the screen and tighten it with bolts. Please be careful as you think it will break if you tighten it too tightly. I am satisfied because it's cool if attached. At the beginning I was worried quite a bit (Lol) View detail
Inch handle is required Parts.
It is a necessary part for installation on Inch handle.
I bought it with windproof.
As a price, it is slightly higher.
It would be better if it is a little cheaper.
View detail
I think CP is nice, but durability is A little ....
Worn in January of last year.
I bracket Bracket to Mirror, but it interfereds deliberately with the Handlebar's Switch Box
Since it can not be fixed, it is raised by the Spacer, it escapes from the Switch and fixed.
Other than that, there was not much difficulty in wearing.
Feeling that the egg Line at the bottom of Screen can match to Meter on CROSSCUB.
It avoided cold winds in the winter and raindrops to a great extent.
I made Smoke Screen, but this is far more than DARK.
Slightly lacking visibility at night.
Actually it worked as a windshield for a good feeling, but in recent days
As I felt that it would be blurred somehow, as I was tightening with Mirror Crack.
When I exceeded the step I heard a crash and broke.
Approximately 5000 km in use distance. It seems that it was not able to endure the vibration whether there are many full-open running ....
Wondering whether it is valid from the price, but the one of old established windshield Manufacturer's
Damage etc. I do not ask much, so if you think so it may be reasonable why cheap things.
However, we still have Repair Parts (In Stock Now for Webike's unpublished items) so
I am repairing it and using it again.
View detail
CLASSIC-like Motorcycle to Fit Winter is cold / Summer insect repellent
Used for Royal En FieldUCE system
<Purpose of purchase>
- Winter cold weather
- I want to try Screen with Dress-up ?.
<Selected translation>
- The point that it is low price, Classic Design
- Asahi windshield does not fall on this vehicle (Is your personality too strong?
- Givi is past Modern / high
<Is installation difficulty strange?>
- The work itself is not difficult, but the exact position is not exactly decided! Running with the tool, stopping it is a repetition of adjustment.
<About products>
Bracket is an old construction, it looks like expensive items? It seems that other parts are also made with details.
Windshield, Quantity : Pair (for Left and Right) Is not the same shape as Pitch mirror matching! There is also distortion. This is why the mounting position can not be determined.
Do you listen to H - DOEM as a similar thing?
- Length of L-TypeBracket was not enough (Without Rubber cap) Positioning Limit.
<Try to use>
- Standing straight up as possible. Winter's cold protection effect is Large! Chest circumference does not get cold.
- Wind Cutting The sound is annoying (From around 60 km). Even though it changes with mounting angle and Helmet.
- Light case / Be careful with Clearance with Na Cell! Because it instructs 2 points, it will be a chunk.
- Fixed Bracket attached to Handlebar disturbs. Episode over the Meter.
<Impression of Motorcycle changes!?>
- Beyond imagination (The person himself aboard) concern. People praise me for becoming a Motorcycle ....
- POLICESpec. Uncle TouringSpec. Do you like your taste?
- I am going to remove it except in winter.
View detail
I am alright
Considering the price of goods, with no complaints quality, installation was completed in a few minutes because there was experience of desorption around Front, no problem after installation.
The direction of the rectifying effect that you care about was feeling fairly so.
View detail
Attachment was highly simple for the degree of freedom of metal fittings.In the windshield effect size, a feeling of fatigue of long-distance migration on a highway reduced very much.Since , however a Handle become heavy, at the pickpocket omissio
Attachment was highly simple for the degree of freedom of metal fittings.In the
windshield effect size, a feeling of fatigue of long-distance migration on a highway reduced very much.Since
, however a Handle become heavy, at the pickpocket omission in the inside of a town, and a peak, there is an adverse effect a little.I think that what is necessary is just to remove by attaching according to a scene since
removal is easy.Since
metal fittings had a BALI, this hit thinks if it can improve.
View detail
"It was attached to SRX400 (3VN). Although a high speed is hard, since I do not want to break the appearance, I purchased this. Although the appearance became good as expected, the protection-against-wind effect cannot be felt. If it is this price, is it
"It was attached to SRX400 (3VN). Although a high speed is hard, since I do not want to break the appearance, I purchased this. Although the appearance became good as expected, the protection-against-wind effect cannot be felt. If it is this price, is it a range which can be allowed as dress-up parts. The rubber bush which uses a visor for fixing to stay got degradation and a crack in one month. There is no influence for practical use. Although a cause is not known, since the description says ""don't tighten a bolt too much"", it may be fastened a bolt too much. In addition, in SRX400 (3VN), it becomes the angle which stood very well for the tachometer of the post-installation style. Probably for the reason, I wear it on the edge of a headlight delicately, and it became impossible to open a headlight case, with a visor attached." View detail