Reviews
When driving on a public road, it broke and the entire TOPCase fell.
Bought MD47 used, previous owner new car. (Jun. 21) The RrCarrier that had been attached to the GIVI TOPCase since the first RrCarrier was used as is. As a result, the Pipe broke from the vicinity of the joint with the car body and fell down with the entire GIVI TOPCase at a mileage of less than 9,000km. The use situation is as follows
1.Fitting:GIVI MONOLOCK Case E260 Series Item no. 68033 + Universal Repair Base Part for GIVIMono-lock Item no. 31335
2.Luggage in TOPCase at the time of the fall:350cc plastic bottle with 1/3 of the drink remaining, glasses case, 6 L-Type Hexagonal Wrench
3.Weight on the RrCarrier at the time of the fall:3kg for the TOPCase, 100g for the 350cc plastic bottle, 50g for the glasses case, and 300g for the L-Type Hexagonal Wrench. Total weight:over 3.5kg.
The steel Pipe is 16mm in diameter and has a t1.5mm, so at that length it would have swung and the stress concentrated at the base, causing it to break.
It is not recommended for touring with a big TOPCase, which requires 2 people.
View detail
Fits: KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R, KAWASAKI Ninja ZX-25R SE KRT, KAWASAKI Ninja ZX-25R SE, KAWASAKI Ninja ZX-25R
The 1st Touring peeled off to veRAN veRAN.
One week after the application, the Sponge layer was used for long touring and it was found that the Sponge layer had a Quantity:Pair (for Left and Right) Both are peeled off and bella bella.
Knee grip was slipping and dangerous during Brake.
View detail
Not compatible with New ModelW?
I co-mounted Bracket to Headlight to install it on my 2020 W800. However Are we getting to the plating parts?" I tried to match the outer plating parts of the Headlight before the main assembly, but the VisorBody hit me and I could not install the VisorBody.
I spent about 2 hours adjusting the mounting position of the Bracket and Headlight, but the Bracket seemed to be not long enough, and no matter how I tried, I could not install it, so I gave up and put the Visor back without it.
I was relieved to see W800 in the list of compatible models, but I wondered if it would not fit the New Model.
I thought about installing only the Bracket first and then the VisorBody later, but even so, I gave up because I thought it would run into the Plating parts of the Headlight.
I was disappointed that a $5,000 item, though inexpensive, went to the Garbage bin.
View detail
Fits: YAMAHA Bolt, YAMAHA Bolt, YAMAHA Bolt CSpecifications, YAMAHA SCR950
Screen interferes with Headlight.
This is the third Screen of this Shop.
As usual, I bought the Universal Product, processed it, and thought I would install it.
I bought a bolt SCR for my car model.
The Screen interferes with the Headlight part though it installs according to the manual.
The diameter of the headlight is not correct, I tried to adjust the bracket to see if I can install it but it is impossible.
After all, the same as Universal Product, the Screen part which interferes is processed Cut and used.
If this is the case, it might have been fine with the 3000 china item.
Not sure if it was the wrong part that arrived.
Fork MountingBracket, but this one is about 3 stars. It's not a model specific easy install.
It is about the overseas Other Brand Product in the Showa era.
View detail
Handmade?
I wore it on my old Grom Initial Model.
I remember buying it because of the low price.
My first impression is that you're an amateur with a heated Acrylic plate and plastic surgery?
Visor is Quantity:Pair (for Left and Right) It was an asymmetrical piece of shoddy work.
There is almost no windbreak replacement, and the lack of proper shaping in VisualUp Objective Items is fatal.
I don't know about the current products, but because of this, I personally don't recommend the Manufacturer here.
View detail
Bikini cowl mounting
There is a lot of gap between Cowl and Headlight, maybe it doesn't fit New ModelREBEL. View detail
Fits: HONDA FORZA(MF10)
Defective in both design and manufacture
The mounting hole of the FORZAMF 10 Rear spoiler is 6 mm lower than the rear in the forward direction, but the four attached Attachment is the same Length. Therefore, if you attach Base with this, it will tilt forward. A wedge-shaped gap is created under Base. This is a bad design.
Since the painting was not perfect, Red rust came from the welded part due to rain of the day. Also, Red rust came out where paint film was removed by Bolt tightening.
After all, I purchased multiple M8 × 70 Stainless bolt and Nut, spring seat gold, plain Gold, (Do not use attached Attachment) Adjusted ScrewLength with Hand grinder and installed firmly. For rust, I painted it with Black car Paint.
The iron bar on the outer periphery of Base is φ 10 mm, the middle part is φ 8 mm. If the base of the installed box is on the outer circumference, you can step by step. I attached the Mono-lock base of GIVI, but because it deforms due to the step, I put the 3 mm thick Aluminum board inside so that the Mono-lock base became level.
Carrier to some extent has tools and for machines with processing technology.
View detail
Windproof Screen
Unfortunately, this WorldWalk Universal Wind Screen is a bit of a heartfelt product to Recommendation, so we will not recommend it.
First, Screen is 5 mm thick and is very heavy.
Mounting Gold goods are also heavy and strong, but making is rusty and rusts soon. (Black part)
Plating parts are rust resistant, but Plating is easy to peel off, so rust will come out where plating peels off. (I do not know how to not rust). )
Well, I attach this installation gold item to Handlebar or Handlebar Brace, but even if I tighten it to Solidly like my parent's enemy, Screen part will inevitably shake up and down due to vibration during running.
When Screen shakes, Wound hits the bottom part of Motorcycle 's Screen.
Of course, Screen is Material : It is Acrylic so it will be frustrating.
It is probably a miso at the time of installation whether to fancy this Screen part in the air so that the dimensions are sufficiently lower at the bottom.
I do rust or shake, but I think that we can safely install this WorldWalk Universal Wind Screen.
I am HONDA's CRF 250 L, but I am able to successfully install this WorldWalk Universal Wind Screen.
Because it runs off-road, it is true that this installed WorldWalk Universal Wind Screens sway up and down, but even if it is not a mountain or off-road it will be a gut by Convenience step and this WorldWalk Universal Wind Screen will shake very much.
Even if it shakes very much, there is nothing to say without hitting it. Large Strong.
There are a few difficulties with installation, but since the original windproof rain protection effect is proportional to the large size, this WorldWalk Universal Wind Screen is quite Large so it is a Level that can be expected with the effect.
Sometimes it is likely to be pushed by the wind in the Screen or it receives the wind diagonally at the Screen and it may take the Handlebar with the crosswind but it has not yet fallen down by the wind so this WorldWalk Universal Wind Screen , It may be the Screen area to the extent that Large is not too large with respect to Honda CRF 250 L which I ride.
I also thought of trying to make Large Yu Size a bit more, but now I am satisfied with this Size. (Lol)
.
View detail
Heavy, but World WalkUniversal Wind Screen
I have added HONDA's CRF 250 L to this WorldWalk Universal Wind Screen (Clear) I installed ws-02wc.
I also thought that it was a little Large before installing, but actually it may be just a little or a little Small.
This WorldWalk Universal Wind Screen (Clear) I am satisfied with the windproof rainproof effect of ws - 02wc, but it is not to pass the wind, this WorldWalkUniversal Wind Screen (Clear) There are probably places where ws - 02 wc is received on the surface, so the wind is heavy and it often rides on Handlebar.
Previously, I attached a medium size Shield with Poly carp, but I was running as if I could exchange winds and divide it into the wind.
The above-mentioned Shield, this WorldWalk Universal Wind Screen (Clear) It is not possible to compare with ws - 02 wc because the shapes such as Large Ki and Earle are different, but as the area where the wind hits vertically increases the windproof rainproof effect increases proportionally, but if there are many vertical faces It will be caught in the wind so it will be hard to drive and it is inevitable fact.
So thinking, my Motorcycle (HONDA CRF250L) To this WorldWalk Universal Wind Screen (Clear) It seems that the wage of ws - 02 wc was just right.
There are also many negative Riders saying that Wind Screen and Windbreak Shield are bad (Previously, I was one of them. ) In fact, if you enjoy the effect even once, you will not be able to forget to realize the effect.
As you probably know many people, Rear box and windproof Screen can not be removed once attached Items among the Rider is a product whispered in truth.
This WorldWalk Universal Wind Screen (Clear) Ws - 02 wc is a little oblique, but a planar plate material : Acrylic Shield, unfortunately the weight is heavy because there are also 5 mm thick.
The molding condition and finish of the Gold parts that support the heavy shield part are also products that are not so good to be honestly good, but because Front has become heavy due to the fact that I bought it, I used it as it is Then this WorldWalkUniversal Wind Screen (Clear) I am enjoying the effect of ws-02wc.
Since it is heavy, I will not recommend it as a priority but it is not a product to deny with casualness.
.
View detail
Rally Car Spec. Required Windproof Screen
【What made you decide the purchase?】
Previously I attached a convex 2-stage Shield made of polyca, but I wanted a height of about 10 cm so this WorldWalkUniversal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) I purchased and tried installing.
【How was it actually used?】
As the plan was able to secure the height of the shield as planned, it became difficult for wind to hit directly on Helmet and the Wind Cutting sound drastically decreased so the inside of Helmet became very quiet and sounds around me became well heard, Direct winds to the wind has also decreased, so fatigue during long distance travel has also drastically decreased.
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) 1. Since there is 6kg, as it is combined with the resistance of the wind, it will be applied as an unnecessary load to the Front part, so the operability has been extremely lowered, but on the other hand the comfort during long driving has improved significantly.
【Mounting was difficult?】
It is not particularly difficult.
It is easy to install.
【Please tell me the installation point and hang】
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) 1. Because it is heavy with 6 kg, please drop off carefully so that the Acrylic board will crack if you drop it during installation so please do installation work.
[Is there anything I was disappointed about?]
Unexpected weight (1. Because it is 6 kg), handlebar operation becomes dull when installing on Front.
【Hope for Manufacturer - Please let me know if you have any improvement points]
I thought it was JAPAN and purchased, but because too much making is too rough, it is not produced by FOR JAPAN MODEL.
Since there is no notation, I do not know where the product is maid in.
Please write in the country of manufacture.
【Have you compared items?】
This WorldWalkUniversal Wind Screen published in other sites [ws-02wc] (Length 380 mm, width 310 mm) We compared it with products that are cheaper than the 20% similar Universal Screen.
After all, Webike and this high WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) In fact, it was shock that the acquaintance friend later taught that the same product as just another 20% cheaper Universal Screen of the other site is different from the seller.
.
View detail
★ Reduce fatigue ★
【What made you decide the purchase?】
I could install it in my Motorcycle and I bought it because it seemed to be solid with the Large condition of good condition.
【How was it actually used?】
The area that receives the wind got bigger than the Small convex light weight polyka Shield that I was using earlier, so you can feel the resistance of the wind received by Shield while driving while using Handlebar operation and Accelerator operation.
The windbreak effect proportionally increased as the area became wider, the Wind Cutting sound corresponding to the Helmet during running almost stopped, the inside of the Helmet became very quiet.
Also, since the wind hitting the body also decreases, heat loss decreases regardless of the season and fatigue decreases from before installation.
【Mounting was difficult?】
This WorldWalk Universal Wind Screen [ws-02wc] It is easier than expected as it only wears Bolt-on to Handlebar while checking the height and angle.
【Please tell me the installation point and hang】
This WorldWalk Universal Wind Screen [ws-02wc] Shield is 5 mm thick heavy Material : Since it is Acrylic, it will be chipped or cracked if it falls down so we recommend that you pay close attention so that it will never drop during installation work.
I used Gum Tape to temporarily fix it so as not to fall even if both hands were released, decided the height and angle, tightened little by little and fixed it to Handlebar.
Also, when attaching parts to the Shield, use the force sandwiching Screw and Nut to sandwich Material : Please be careful not to break Acrylic's Shield.
[Is there anything I was disappointed about?]
I regret about Material : AcrylicShield is heavy. (1. 6kg)
Used Bolt and Screw rusts soon. Before installation (At opening) It was a bit rusty from.
【Hope for Manufacturer - Please let me know if you have any improvement points]
Thickly (5mm) Heavy flat Material : AcrylicShield thinly (2. 5 mm) It is a desire to evolve into a light R-shaped polycarbonate Shield.
I want the parts to be made of rust resistant parts.
【Have you compared items?】
It compared with WebikeMode's lightweight polyca Screen, but we gave up purchasing without fitting.
[Others]
During rainy weather, thanks to Shield, it makes it easier to secure some sight.
Of course, the rainfall from the front that you receive on your body is drastically reduced.
.
View detail
World WalkWorldWalk Universal Wind Screen
【What made you decide the purchase?】
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) I bought it because I like the affordable Large Kimi wind protection area and Universal installation method.
【How was it actually used?】
This WorldWalk Universal Wind Screen [ws-02wc] This made it difficult for wind to hit from the bottom of the Helmet to the chest, so it became extremely difficult to get tired when traveling on a long distance Touring or expressway.
Also, on a rainy day this WorldWalkUniversal Wind Screen [ws-02wc] The amount of rain that directly hits the Helmet shield has been reduced thanks to the rain so it became easier to see the front as it was raining.
【Mounting was difficult?】
Attached attachment By just looking at the thing, it was very easy to install because it is a simple installation design enough to understand the installation method smoothly.
【Please tell me the installation point and hang】
Temporarily tightening Screw and Nut of each part, this WorldWalk Universal Wind Screen [ws-02wc] To the angle and position of your favorite little by little.
Since the Wind Screen part is heavy, please work while paying attention not to drop it.
I temporarily fixed the Wind Screen part securely so that it does not fall to my favorite position by using Corrugated cardboard or gum Tape, and then fastened Screw and Nut of each part little by little and fixed it as Firmly last.
[Is there anything I was disappointed about?]
This WorldWalk Universal Wind Screen [ws-02wc] Material of : Acrylic's Wind Screen has R but it is a plate-shaped Shield, so it catches the wind more than I had imagined, so I feel that Handlebar is heavy and drizzling a bit..
【Hope for Manufacturer - Please let me know if you have any improvement points]
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) Let's measure the weight of 1. There was also 6 kg.
Material to flowing water : Acrylic Shield 5 mm is heavy. The future is a polycarbonate thickness 2. Can not improve to a lightweight Shield of about 5 mm?
【Have you compared items?】
Because we could not install it, we abandoned it, but compared it with WebikeGarage's lightweight polyka Shield.
.
View detail
I want to rust and shake it
This WorldWalk Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) The total weight of 1. There was 6 kg.. (Including installation Gold items)
It's too dangerous to wear on Handlebar. Material : Acrylic is brittle and heavy, is not it.
Who puts this heavy on the Handlebar? (Lol)
Especially it is disadvantageous for off-road driving with much vibration.
Just
I am using this WorldWalkUniversal Wind Screen [ws-02wc] To the CRF 250L of HONDA's off-road car (LOL)
The installation Gold used in this WorldWalkUniversal Wind Screen is basically easy to rust.
Although Chromium Plating is applied, Plating also strikes as soon as stress is applied at the time of installation.
Mounting Nut to Handlebar is also Uniqlo and Screw and Nut of Matte Black on ShieldReverse side generate Rust especially early.
Screwetc. When Rust comes out and it becomes severe, Screw does not turn and it can not be removed, so when you assemble it, painting WaterproofGrease on each part of the installed Gold object and Screw will give rust prevention effect, but WaterproofGrease will be dusty and dirty As Garbage accumulates eventually it will also cause Rust so we recommend Recommendation for lightly cleaning and WaterproofGrease replacement for each Season.
In this WorldWalkUniversal Wind Screen, since many parts that are easy to rust are used for the price, those who are running in rainy weather should especially take countermeasures against rust prevention.
I love this heavy Rust easy WorldWalkUniversal Wind Screen [ws-02wc] , I am usually removed from Motorcycle.
This WorldWalk Universal Wind Screen [ws-02wc] I can not run the dirt and the galley place and the shield will come down soon with the vibration so I will only go to this WorldWalk Universal Wind Screen [ws-02wc] I am trying to install.
Of course, each part of this WorldWalkUniversal Wind Screen has WaterproofGrease processing but if it gets wet with rain with a long distance Touring, I will remove it immediately after coming home and dry it so as to disassemble & clean up Grease up.
I am inspecting and serving the beans so that it is not Rust, but unfortunately there is no worry of effort and there are various kinds of gold items Rust coming in.
.
View detail
1 in Handlebar. 6 kg is dangerous heavy items
This Universal Wind Screen sold by a company called WorldWalk in Tokyo [ws-02wc] Although only the Instruction Manual made by WorldWalk and the packaging of goods are polite, what kind of gold parts do you make in what developing country? It is a very bad finish like Big Ri in state.
Although it can be estimated to be less than 1000 yen at the cost of product material cost, in the wording and item management refusing the compensation law guarantee associated with the PL law on the back side half of the simple Instruction Manual on the 1st face of the A4 wood free paper carefully It can be inferred that it is a price.
This different Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) We found some of the same products sold at around 20% cheaper than this WorldWalk.
But at Webike this Universal Wind Screen is only traded with WorldWalk, so I got it by Point from Webike.
Actually, I wanted to use WebikePoint, so WorldWalk, which is more expensive than other sites, is the selling agency's Universal Wind Screen [ws-02wc] I got it from Webike.
The two-stage medium-sized wind protection shield that I am wearing now is a lightweight Shield of 300 g or less, but it is well thought convex molding, the strength is high, Wind Cutting ability is high and the air resistance is low.
However, this WorldWalk Universal Wind Screen of the same medium windproof Screen [ws-02wc] (Length 380 mm, width 310 mm) Weight is 1. There is 6kg too heavy the Front becomes heavy and it will cause problems with driving operation.
With this weight, no matter how much you tighten Screw, it will come down with vibration and the part hitting the bottom of the Shield will be full of scratches.
Moreover, because it is a plane molded shield, the wind escape is poor and the air resistance is strong.
Although it is a commodity got by Point, this WorldWalkUniversal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) Installation of gold stains of finish and 1. About the planar molded shield with a weight of 6 kg and air resistance Large, my evaluation is a matter of course Minus.
However, I 'm expressing the feelings of respect in the design that can be installed in this mostly Motorcycle's universal installation.
And this Universal Wind Screen [ws-02wc] Is going to be used because it looks cooler than the two-stage medium-sized windbreak Shield being worn now. (Lol)
.
View detail
Front1. Passes and offs are hard to run with an increase of 6 kg
It is often said that adding windbreak Shield to Motorcycle will increase wind resistance, but what about.
I think that it differs depending on the type and the angle to be attached, but if Rider shrinks his neck and rounds his back, rather than stopping the wind with the upper body vaguely, I think that air resistance will be much less dangerous if she winds it well with a windbreak shield Is me.
Regardless of the air resistance it receives, if you install a wind protection shield of a certain size or larger, the wind you receive during driving does not hit the human body directly, so you feel less fatigued and you feel comfortable driving.
I added HONDA's CRF 250 L to this Universal Wind Screen [ws-02wc] (Length 380 mm, width 310 mm) I installed it.
In the past I entered Beast Road Attack or Road Free Road with XR and XL, but after becoming CRFL because of my ages too, the roadless road will not go, run instead on a long distance paved road More things came.
Mountain stream amago fishing and Stag beetle gathering - Because we go to germinology collection, it will enter a little narrow mountain path, but this Universal Wind Screen will not get in the way.
However, this Shield is weight (1. 6 kg) so obviously it hinders Handlebar operation.
In this Universal Wind Screen, the installation method is considered well, and although there are restrictions on angle and position, I think that it can be attached to most Motorcycle. Quality of installation Gold is low.
Since Shield weight is heavier than mounting strength, Shield immediately falls by vibration. I hit it and it's all around Wound (Crying)
There are two colors of Shield selection colors, Clear and Smoke, but I wanted to have a Clear, but I kept it Clear, but I guess it was better to keep it Smoke again, or another Large Yea Size Whether it was better to make it Screen or still indecisive psychology is ongoing.
That's because Clear 's Screen on this Universal Wind Screen was too transparent, so I guess that Clear' s screen was not noticeable even if it was too big.
Adoption of Universal Wind Screen Although there is something to be confused about Size and color selection, if you install it anyway it will be hard to operate with continuous Corner or Off-road Handlebar will be very heavy, but the windbreak effect is absolutely Large - Long distance easy Especially straight and highway.
.
View detail
Caution : Weight is 1. 6kg
First of all, for the purpose of the treatment of the wind and the rain to the Instrument panel, I tried attaching a small, transparent ultra light polycarbonate convex ShortShield at the top of Headlight cover.
It is perfect Size to paste RALLY 50 Number Plate.
An acquaintance riding in the same type Motorcycle was wearing a super lightweight plane wind protection poly shield of Large Large with RALLY 50.
"It's light and it's a long distance comfort with this area. That thing.
I seemed to be too small in my convex ShortShield so I added it to double the area and it became a 2 stage medium size wind shield which is quite satisfying that the wind and rain hardly hit the lower half of Helmet.
Ultra lightweight polyca made convex ShortShield in two steps in a staircase appearance Dasa substitute (Lol)
This year it was Touring in Hokkaido.
At the road station in Hokkaido, there was a person wearing a decalized wind protection shield of the same feeling to the same type Motorcycle.
Making Gold The making of things is sloppy but it seems to be strong Material : It was a plate-shaped windbreak shield with Large R of Acrylic.
If you talk to the owner, it will be hard to get tired because it will not hit the wind even if you run for a long distance. Even if you run a little bit of Helmet shield on a rainy day, even if you run a little, rain will hardly come inside Helmet so you can use Helmet shield The inside is hard to cloud and it rains hardly comes in even if you open the neck of rain clothes and run.
However, on the other hand, since the Front is so heavy and unstable it will be hard to run, no matter how much tightening it will be too bad that the Shield will immediately go down due to vibration on Off-road.
After returning home from Hokkaido, the same kind is found at each site when searching by Net.
Copy the item name and search it with Webike ‥. there were. was.
WorldWalkUniversal Wind Screen [ws-02wc]
Purchase into shopping Basket Purchase.
This WorldWalk Universal Wind Screen [ws-02wc] It was easy to install on Honda's CRF 250L, but still it is heavy weight on the apparently large Handlebar weight 1. 6kg. (Material : Acrylic : Thickness 5 mm, length 380 mm, width 310 mm)
Moreover, it does not flush much even if it receives wind in the plate-shaped Shield with R.
If you increase the windproof area by Large plate shield with R, the windbreak effect, piloting hardness and Front weight increase proportionally.
Conclusion :
If you would like to wear a windbreak Shield in Motorcycle, we recommend to efficiently search Large type convex lightweight windproof polycarbonate Shield from the beginning.
.
View detail
Are prices suitable?
Because it was cheap for domestic products, I bought it was a bruise.
I am busy and I can not take the time, so I shipped without properly inspecting, so I thought that the Objection correspondence would be appropriate so we gave up and installed it.
In the future I would like you to inspect it properly.
View detail