Reviews
It looks Refreshing and cool.
Wiring can be managed by looking at the wiring diagram attached.
The Engine Starter Motor has a protrusion on the Case, so when installing it in the Handlebar, either drill a hole in the Handlebar or cut it out.
If you want to fix it properly, you should drill holes.
I drilled a hole.
Also, if the Screw is tightened too strongly, it will not return when the Cell is pressed, so adjustment is necessary.
If the Brake Clamp is also tightened too hard, the Brake lever will not return.
If you loosen this one until it goes back, the Clamp will not be fixed and will move.
It is dangerous that the Brake can not be fixed, so after much consideration, I decided to use the gap between the Handlebar and the Clamp Limit for the Wiring.
Insulation Tube (a thin tube that shrinks when heated) was inserted using Parts Cleaner and screwed closed.
There is only enough space for the paper, so we need to figure out a way to secure it.
In any case, I am generally satisfied with the results, despite some trial and error.
The quality and texture are 3 stars because of the need for the above devices.
The rigidity is 3 stars because it has only been a few days since installation, but the HandPost and other Gold genus components are solid.
View detail
OEM Color is happy
Large Knuckle guard
OEM Color is happy
It also provides good wind protection.
It is installed using Mirror Screws, but if it is used in conjunction with Windshield, which also uses Mirror Screws, you need to be rather careful.
If you don't tighten it tightly, it might become RoseRose while driving?
View detail
Some processing is necessary
I thought that I wanted to lower Handlebar of the new model Grome Yagashi I found this product.
Picking attracted to places where looks and angles and heights can be adjusted.
Installation is simple. There are two points to be aware of when attaching to Grom.
One is a Handlebar hole fixing the Switch Box. From the beginning Quantity : Pair (for Left and Right) Although the hole is opened in the Handlebar,
It seems that it is not a hole dedicated to Grom, and you need to open it yourself.
Clutch side can be used as it is. The Throttle side is out of position and the Bar End part is used as it is
Get out of the Grip.
Another one is NORMAL's Front brake hose, it will collapse to Meter Brown 苦 Brown will interfere ww
Adjustable range is quite limited though Handlebar can adjust Position.
Hence it is planned to replace Brake Hose w (Panjiot Adapter has a straight shape)
There is no problem with the product itself. You can also firmly fix it well.
Aluminum It will be cool forward looking forward looking leaning posture (Height 178?
People who are not used to Separate handle are a bit painful?
View detail
Measures against cold weather
I am using it with XL 1200 C SPORTSTER 1200.
By installing Knuckle guard and Grip heater
Midwinter Riding has also become comfortable.
Especially when running on a highway for a long time, the wind hitting the hands is also
It is considerably reduced.
Since it is slightly outside the width of the Handlebar, attention is required for contact when running in a narrow place.
View detail
Until normal installation, one ingenuity, two ingenuity was required
SR 400 attached to the 35th anniversary MODEL.
The effect is outstanding,
Kit comes with 2Size Bracket,
Since it is one at a time, if one side has Bracket, the other will need Bracket of the same length.
Quantity : Pair (for Left and Right) It becomes a different Length and Balance is bad.
Since Bracket is wide, it corresponds to Master cylinder.
This is avoided with the Mirror Adapter. Since Yamaha's Motorcycle is Opposite Thread Screw, Right-Handed Screw Adapter and Y's Gear's Normal Thread Screw Side Mirror Base are used, and Quantity : Pair (for Left and Right) Both are Normal Thread ScrewMirror.
Since Bracket sold also on Single Item, I ordered it.
So, with the same Length Balance was attached frequently.
But the other problem is.
Since it must be fixed at one point, the Knuckle visor loosens when it is running at high speed.
Loose and hit Lever, it will be very annoying with vibration.
For some reason Left Side only. Right had no problem.
Right may be because the direction the wind hits is the direction the Screw closes.
Left is a loose direction.
So let's chew on Spring washer and add Opposite Thread Screw to Adapter.
That is,
To Right Side, reverse → Right-Handed Screw Adapter + Normal Thread Screw Side Mirror Base (Standard for LeftSide Mirror Base)
Left Side is a positive → Opposite Thread Screw Adapter + Opposite Thread Screw Side Mirror Base (Standard's Right SideSide Mirror Base)
I will carry out a confusing installation called.
As a result, 100 km on the expressway / H It did not become loose even when cruising. When.
Quoted from your blog
https : / / kanjitalker. wordpress. com / 2015 / 04 / 22 / %e3%83%8a%e3%83%83%e3%82%af%e3%83%ab%e3%83%90%e3%82%a4%e3%82%b6%e3%83%bc%e3%82%92%e7%9d%80%e3%81%91%e3%81%9f /
View detail
As looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either. However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four sta
As looking, appearance was also good and was not cold on the high-speed Touring of midwinter at combined use with a Grip heater, either. However, the left falls a little in a relation with the angle of a Mirror, and since it is feeling, they are four stars. View detail
- Although I think that it is based also on an attachment part, there is no protection-against-the-cold engine performance so much. It is possible to fix at , a high speed, etc., to such an extent that a wind is not equivalent to a fingertip. A
- Although I think that it is based also on an attachment part, there is no protection-against-the-cold engine performance so much.
It is possible to fix at
, a high speed, etc., to such an extent that a wind is not equivalent to a fingertip.
An insect adheres on a grand scale with an insect Attack at
and a high speed.
Since it is
and transparence, it is not conspicuous.
Form is rather good.
Since the hezagonal wrench 8 is required in
and mounting and fixing, please get those who are not.
View detail
The Glove was also changed into the thing for arctic cold, and the fingertip was still numbed, since it was painful, it purchased, but too, the fingertip of the day before and behind five air temperature is palsied with the run for 30 minutes, and it beco
The Glove was also changed into the thing for arctic cold, and the fingertip was still numbed, since it was painful, it purchased, but too, the fingertip of the day before and behind five air temperature is palsied with the run for 30 minutes, and it becomes painful.
Although it might be a thing with bad me expected too much, an effect to the extent that it considered was not acquired.
Or [ that it is effective if ten air temperature exceeds ].
Since the polite description attaches
attachment, anyone thinks that he is easy.
In the case of W800, it was able to set to the favorite position using the attached extended Stay.
Although it is a difficulty that height on either side is a little different, they are reliable goods, without blurring during a run.
View detail
Although goods are very good, since it does not cling only with accessories depending on a vehicle type, special Nut and a Washer are prepared and height control is required.
Although goods are very good, since it does not cling only with accessories depending on a vehicle type,
special Nut and a Washer are prepared and height control is required.
View detail
a palm -- although there was a Heater in a side and it was satisfactory, the shell got as cold as feeling is always lost. It discusses by the colleague and, first of all, he attaches. like the Cover -- it is not -- carry out -- it wa
a palm -- although there was a Heater in a side and it was satisfactory, the shell got as cold as feeling is always lost.
It discusses by the
colleague and, first of all, he attaches.
like the
Cover -- it is not -- carry out -- it was preeminent for the effect and cold stopped almost worrying it
View detail
Since a fingertip got cold, it hoped to prevent and purchased. Although it was a general-purpose article, the attached Parts was used and it has attached also with the KATANA. After attachment does not break down a Style so much for a Light smoke. Alth
Since a fingertip got cold, it hoped to prevent and purchased.
Although it was a general-purpose article, the attached Parts was used and it has attached also with the KATANA.
After attachment does not break down a Style so much for a Light smoke.
Although the last run was on December 27 and was still about 100 km, and the
effect was with the same way and Glove as last year, it has felt the protection-against-wind effect.
Distance does not increase more or the effect in high speed operation is not known yet.
View detail
Attachment was also easy and it was effective in it being unexpected also in this size. The coldness of a hand is also likely to be cancelable if there is a Grip heater or a Heat glove in midwinter.
Attachment was also easy and it was effective in it being unexpected also in this size.
The coldness of a hand is also likely to be cancelable if there is a Grip heater or a Heat glove in
midwinter.
View detail
Since the thing itself is not so large, a wind cannot necessarily be intercepted thoroughly. Since the heat source is not necessarily attached, it does not get warm. Also by , since a wind is not equivalent to a fingertip directly, it preve
Since the thing itself is not so large, a wind cannot necessarily be intercepted thoroughly.
Since the
heat source is not necessarily attached, it does not get warm.
Also by
, since a wind is not equivalent to a fingertip directly, it prevents the point of a hand getting cold considerably.
Rain also prevents only a few in passing.
If the
tool has two, an Open wrench and a hezagonal wrench, anyone can attach it easily.
It is quite convenient that desorption can be freely done for every
Season.
It is whether it was good for the range and vehicle type to attach to also spread, when it could do and there was however a Stay two merits and demerits at a time ...
View detail
It attached to 07 model VERSYS. Although one of the two stuck exactly by the attached Stay, die length was lacking and the opposite side purchased the suitable Stay in the Home center. Moreover, since the Bolt of attachment is short and there was starti
It attached to 07 model VERSYS.
Although one of the two stuck exactly by the attached Stay, die length was lacking and the opposite side purchased the suitable Stay in the Home center.
Moreover, since the Bolt of attachment is short and there was starting [ little ] to a Nut, the Bolt was changed.
Structure of the
main part is satisfactory.
Although a fingertip gets cold, if if there is nothing compares, a grade will end considerably lightly.
I think that it is good for the touch attached again not being conspicuous, either.
Since it is various for every vehicle type that it is necessary to add fine parts to its purchase, the degree of satisfaction about which it seldom cares is high.
Although I think that it is impossible, I think that the windshield effect may go up more if the height of attachment can be adjusted according to the position of a hand.
View detail
Although attached to SYM T2, Pons attachment was able to be carried out about working-hours 30 minute. If the Master cylinder by the side of the Throttle became obstructive, it cared with ?, but the attached Stay for extension was able to be used exa
Although attached to SYM T2, Pons attachment was able to be carried out about working-hours 30 minute.
If the Master cylinder by the side of the
Throttle became obstructive, it cared with ?, but the attached Stay for extension was able to be used exactly.
The Chatter of a main part has even no
speed of 100 km.
Although the wind which is equivalent to a fingertip at the time of a run is also reduced considerably, since it is not a large-sized Guard, a wind is equivalent to the back of a hand too.
It was good for there to be no necessity for the purchase of Stays separately, and for it to have been almost unprocessed and to have been individually, attached snappily at this price.
Since a ball head lock nut hit the origin of a
* Front brake lever, it exchanged for the hexagon nut of money on hand.
View detail