Reviews
About the Brake Reservoir Tank
The included Instruction Manual does not provide detailed instructions for replacing the bracket on the brake reservoir tank, so you will need to work with it in mind. The installation is not so easy as to fit easily and effectively, but the alignment of the screw holes with the body is not easy, and I feel that it is for those who are familiar with the work or those who have learned enough beforehand.
Even after the bracket replacement, the Cowl is still in a position where it seems to touch the Limit and I am not sure if this is correct.
The overall look and color is nice and comfortable at all.
View detail
Requires ingenuity in installation
As for the installation, it was difficult to install the LowerBracket to the vehicle body.
Also, I have a BEET Taper Handlebar, and I changed the Bracket of the BrakeReserver tank to the Exclusive Bracket that came with it, but it interferes with the Cowl quite a bit without modification.
Light can only be adjusted by removing the Cowl.
View detail
Effective
Effect Large
After putting it on, the Helmet's wind noise became the base.
I wonder if the wind that was hitting my body is now hitting Helmet.
View detail
NumberKit
Purchased to install Japan Standard Number on an imported Fender Eliminator. It is thick and seems to be resistant to vibration. View detail
Different from Image …
The FRP inner stay also cracked during use, so I wonder about its durability. I'm not sure about its durability. Now I replaced it with Bikini cowl. View detail
RubberWasher
I bought it to prevent vibration and scratches.
Quantity:1 Set of 4pcs. is reasonably priced and useful for periodic replacement for repair.
View detail
Picture up was carried out. It is such touch when it compares that it is pure.
Picture up was carried out.
It is such touch when it compares that it is pure.
View detail
Cushion
I bought this to prevent Fixing Screw from loosening due to vibration and to prevent Wound.:1 Set of 4pcs., good product at a reasonable price. View detail
High speeds are now comfortable. (^^^)
I did a little TEST driving on the highway.
I think it works, but I can't say for sure until I drive it a little more, since it's not a long run yet?
The screws that fix the FRP part of the base are ugly, so I changed them to bolts that I have on hand.
I'm looking forward to it now as I plan to drive long distance on the highway in April. v (´∀Translated by *v) piece
View detail
Solid construction and perfect installation.
Installed on a W800 2020. 。 It is a special mounting hardware, so it fits perfectly and feels good.
The quality is also solid with thick Material 。 It's a shame, because it's quite large and a bit annoying to look at. 。
Overall, I am satisfied with this product.
View detail
To improve
The windshield is well done, but it only has 3 anchor points. It vibrates a little. The thing to change absolutely is the quality of the glass. Chinese plastic, it always scratches. Mine arrived already scratched. In conclusion it is a good windshield, very nice, but it vibrates a little and has its biggest flaw in the quality of the glass. The fairing is well made, but only has 3 anchor points. It vibrates a little bit. The thing to absolutely change is the quality of the glass. Chinese plastic, always scratches. Mine arrived already scratched. In conclusion, it is a good windshield, very nice, but it vibrates a bit and has in the quality of the glass, its biggest flaw. translated by Google Translator View detail
I'm not so sure about the installation
I use the OEM Bolts for installation, but when I tighten them normally, they are in the exhaust pipe Interference
I added a collar and tightened it up
I wanted the Bolt in separately
View detail
The paint is beautiful! I asked him if he thought he had to wait a month
The paint is as clean as the OEM colors!
I think the holes in the Shield mounting are slightly gapped! But it was Large sturdy!
? I thought I'd have to wait a month, so I inquired, and it arrived two days later!
Well, maybe it's because it's SparkBlack?
View detail
Wind Cutting noise is awful
The texture is high, I like the design, and the windproofing is very effective
But the Wind Cutting sound is terrible Large sound and sound feeling of the sound of the Level that I cannot bear personally
It's quite uncomfortable even at about 60?Speed It's not worth using except when driving on the highway for a long time
Fortunately, it's easy to put on and take off, so you can usually take it off, and only put it on when you drive on the highway for a long time Usage
If you don't buy it as an attachment for long touring, you will regret it It is
View detail
It's cool to look at
I bought it for its looks, but I don't expect the Shield to be as effective as it looks It's not there Also, the Shield is shaking at high speeds, and compared to CAFE, it's not as good as the CAFE It is recommended for those who buy it with emphasis on design View detail
Fits: YAMAHA V-MAX 1680, YAMAHA V-MAX 1680
I really like the shape of the Shield but…
The warped portion of the top of the Shield is visible, with a wiggly view The aerodynamics and driving are fine However, the wind that rolls in will be forward In the case of "Sunglasses" with half-Cap, "eyeshades" will come out in front View detail
That's about as good as it gets..
The product arrived in a temporary assembly
It's good that it is temporarily assembled because you can do the image when it is installed
Because the bolnos were a little too long, when I tried to install and main-tighten them
Play? It was rattling because there was a
I replaced it with a handful of Bolts and installed it
Because of the model of car, there is quite a blur at a fixed speed at low speed
Well, it's not like this
View detail
high!
Installation is not difficult..
As Bolt and Mount seem to rust soon, Bolt is replaced with Stainless
Mount uses Handlebar Brace of Aluminum without using attached items.
Screen seems to be not polished enough, so the scenery looks very distorted.
I bought Clear but this does not make much sense. I should have made Smoke.
Inner cowl is painted only on the outside, so ugly inside can not be seen after installation. I should have made it Smoke in this respect.
Windbreak effect is good but rectification effect is not good. Pretty finish.
But it looks good on VMAX 1200 - - - Parenthesis It's okay - - -.
Overall this quality thinks this price is too high.
But I bought it (Lol)
View detail
It was subtle.
I installed in XSR 900.
I installed it in wind protection main in winter, but the coldness of hand got relieved somewhat.
Bracket is holding and the circumference of Handlebar gets messed up.
The shape of Bracket is not good
It was not satisfactory to join MirrorNut together..
The price is also a bit high.
Currently undone.
View detail
Purchase with reference to Impre
Because it is an investment not stupid, I was worried whether there was a corresponding effect, but windshield effect is moderate
However
When I ran at high speed at trial run at a reasonable pace the fixation got up and the mounting angle changed
Tighten again and try again, the angle changes again after losing wind pressure
In the case of my Motorcycle, when the angle falls asleep, Shield hits the Brake masterTank so we will take actions by changing Fitting a bit.
Other
As it is still Handlebar Mounting, the microvibration transmitted to the Handlebar will increase, the resonance at the end surely increased but I will endure it is not enough to bear it (Although I'm wearing the vibration prevention guy on the brass, Brass)
View detail