Reviews
It's like a different body.
It was very easy to install, and I think it's great that Spring washer and KrustNut are equipped as standard. I put the screw lock on the lens because of the vibration. I think it is necessary to remove it once to adjust the optical axis. As for the wind storm, the wind pressure from the chest to the chin was reduced. But at high speed, you need to lean your body forward. The look and feel of the bike has been completely changed, so you can feel like you are riding a different motorcycle. I'm glad I bought it. View detail
Less dirt on the Exhaust pipe! Less mud splashing!
I've been eyeing this item for a while and was able to purchase an Outlet on webike.
As expected of CHIC DESIGN, the quality is satisfactory.
As you can see in the title, the exhaust pipe is less dirty and less muddy, so it's not only good for design but also for practical use!
View detail
A well thought out product.
The installation and angle adjustment of the product is very well thought out. I have a Handlebar Spacer on my bike so I was worried that it wouldn't fit properly, but it did without any problems.
The impression that I used it is the feeling of 80km even if I run at 100km like -20km from the time without it.
However, at around 100km, the angle will change due to wind pressure, so curing of the interference area is always necessary.
View detail
Spec. Hope
Ordered Screen. "Long ScreenSpec. desired. Please make arrangements at View detail
Fits: HONDA XLR125R, HONDA XLR200, HONDA XLR250, HONDA XLR250
I haven't had a chance to test drive it yet, but my impressions after installing it
I can't say enough about the product itself! The quality and feel of the product is better than I could have imagined!
The only thing is that the price could have been a little more because of the good work. I can't help but wonder if it's not something you make a lot of.
Thank you for a good product, I am satisfied with the Large variant.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SPORTSTERFamily
I was able to install it successfully.
Before my 883 Iron was delivered in April, I had been thinking of installing a Bikini cowl from CHIC DESIGN's TEERAEarly sometime after I bought the car. However, the price was too high and I was worried for 2 months, but I decided to buy it. I'm sorry, but because of the price, I bought the Body at another store instead of WEBIKE, and I only bought the Lowdown Kit because there was a Point here. I had to adjust a lot of things to install the body, and the instruction manual was not very well written, so it was hard to understand, but I managed to install it. I think the price is about half the price of the others. The stuff is good. View detail
Change of pace, Quantity:2pc. The second set of Bikini cowl
This is a makeover from TotalCraft's Bikini cowl.
It's a little on the small side, but it works pretty well!
View detail
It looks good on you!
Cowl has been released by various manufacturers, but this is a long-established manufacturer and the fitting is perfect.
The shape is a little more rounded than the one made by NPROject, and it fits the z900rs very well!
If you like the ZrX shape, which is crunchy and has gills, you should choose NPROject.
The edge of the screen is also pre-rounded, so there is no need to attach rubbers to the edges.
The paint is also perfectly identical to the OEM Color.
The Master Cylinder Bracket is also included, but since it is designed for the OEM Handlebar, it will interfere with the OEM Handlebar, so if you are replacing the OEM Handlebar, you will need to prepare the Bracket yourself or have additional work done.
Windproof from the neck down and makes high-speed Touring a breeze!
I'm happy with the way it looks and functions Up!
It'll take a couple of months to deliver, so I'd suggest anyone planning to buy one, order ahead!
View detail
Fits: HONDA Rebel 250, HONDA Rebel 500, HONDA Rebel300, HONDA Rebel300
Masker Load
The Exclusive Bracket must be tightened from the Blinker side to fit the Nut hole, and the Slot cable does not need to be tightened.
The Screen installation Bolt was not included.
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For finishing of Front reinforcement.
I added the Stabilizer to make the front area more firm.
The main purpose is to prevent the Front from twisting.
good point
The front is fixed Firmly.
It is easy to take SelfStir because it assists the movement of Front spring.
Easy to install.
A bad point
It's hard for people who don't understand value to understand.
Even if the suspension is NORMAL, you can feel the difference, because the front is fixed firmly, the road surface tracking is improved, so you can drive smoothly. The basic design of the bike is old, so it is better to add some lever.
The more you do it, the more it works.
View detail
When I say Outlet.
This is a chain case by CHIC DESIGN.
I was told that it was an Outlet product, but I have no problems with it for everyday use. It is a cheap and good quality product.
good point
It is recommended to paint it, but it is enough as Black Gel.
The Bolt holes are in place, so installation was not difficult.
The shape is beautiful.
A bad point
● No.
If it was a motorcycle with a lot of plating parts, I would be concerned about it, but it's not that kind of motorcycle, so it looks good without painting.
You can just paint it when the scratches get too bad or something like that.
View detail
I knew it was bare.
Because I made it to Ska tune, and Air cleaner was exposed. After all, I wanted to at least cover it. I decided to go with CHIC DESIGN's because I wanted to make a beautiful shape, not a boorish one.
This is a Number Seal style design.
The Aluminum Tank is Silver and I wanted to put Contrast on it, so I put Black Gel on it.
good point
●If it is rain and wind from the side, it will Cover.
Installation is easy.
It is a Side cover with an Edge effect, so it looks
It becomes "Racer".
I think it will be a good parenthesis for NORMAL cars.
Can be installed in Ska tune condition.
A bad point
● No.
The first Image to customize this Motorcycle was the Dirt trackRacer, so I think I came pretty close to the Image with this Side cover.
Because the driving also changes considerably by the existence of the side cover in Ska tune, I think that it is a safe measure to put on the side cover if the air cleaner is bare.
View detail
I wanted to get an outside shot.
I wanted to make it different from the street style, so I put on the Under Cowl, which I would not normally put on.
This installation is to replace the Normal engineGuard.
good point
It becomes a Spartan Style like Racer.
It protects Engine from Small stones.
You can use it as it is because it is Parenthesis.
A bad point
Installation is a bit of a hassle, especially when attaching the bottom bolt as it is designed to fit.
The appearance is quite Race ish, but it is the Parts which can be ridden with confidence even in Touring.
If you drive for a long distance, you will drive on many kinds of pavement, so it is possible that the engine will be hit by small stones or obstacles. So, it is a practical part.
View detail
Fits: KAWASAKI W650, KAWASAKI W400, YAMAHA SR500, YAMAHA SR400, Others
Beautiful modeling, it goes well with NORMAL.
The standard Tail lamp.
The Lucas tail lamp comes in two sizes, Large and Small, and I chose the Large.
You will need to drill holes in the Fender.
good point
It can be attached to Normal fender. Even if the other fender is Normal or Lucas tail lamp, you can get the atmosphere of old car.
Visibility is high. Also passes vehicle inspection.
Design that never gets old.
Since it is FRP, it can be repaired by Acetone even if it breaks.
A bad point
It's safe, so it doesn't show any particular personality.
I've also been using this Tail lamp for a long time.
I never get tired of it and it looks good in any Style.
Products that have been sold for years, products that everyone loves.
I think I'll keep using this for a while.
View detail
Fits: YAMAHA TW200, YAMAHA TW200E, YAMAHA TW225E
I wanted to make it Monotone.
The Handlebar, Light, Exhaust System, and Silver shades were Large and a half, but I wanted a tighter look, so I went with Black. And I wanted to use FRP.
I had to choose between K&H's and CHIC DESIGN's, and I decided to go with CHIC DESIGN's because of their great modeling.
good point
Design is good. It rounds to the front tire beautifully. It looks as if it was originally attached to the front tire.
Lightweight and sturdy, it's a small motorcycle, so even a small weight reduction will make a difference in your ride.
The color of the body will be tightened up, because even if you put a little black in the plating parts, it will be a good color.
If it cracks, it can be repaired with Acetone. If you want to make the repaired part more inconspicuous, we can paint it.
A bad point
The place is rather expensive.
There are a lot of FRPMaterial parts out there, but the long-established parts have different finish. These parts are very good.
View detail
Is good
I bought the LSize as a replacement for my Puch Mini Cowl. You can adjust the angle, but if you stand it all the way up, it provides wind protection up to your shoulders, which was very helpful on a cold day. If you ride on a very windy day, you will see the difference. I think the protection is reasonably high, and since I have a USBSocket, I feel a little safer on rainy days.
The screen itself is not so heavy, so it doesn't seem to affect the handling much. I don't care about the limit driving too much because I ride with Touring Main.
color is [Color] It's Smoke, but it's more transparent than I expected.I think Design is a matter of taste, but I personally You look kind of strong. So I like it.
It is easy to install because you just need to remove the side cover of the meter. I think it can be done rather easily because it only removes the side cover (?) of Meter a little.
As mentioned above, you may not like the look of it, but it has good protection against insects, wind, and cold, so it's a Recommendation.
View detail
CHIC DESIGN Masker Load
While Cowl is being sold by various companies, I had a hard time deciding which one to use, but I finally decided on CHIC DESIGN's Masker Load.
The design, painting, detailing, and installation precision are excellent, and the installation is not difficult if you follow the instruction manual.
I have no complaints about the product itself, but when I installed the Cowl, I had to remove the ForkEmblem, and I think I will make my own bracket for that. Also, since I changed to Other Brand Product's Low Handlebar, I used the Cafe's Bracket for the Brake Master's Tank.
There is no rattling while driving, and I do not feel that the windproof performance has improved dramatically, but the fatigue in continuous high-speed running is reduced, and it seems to exert power to Ron Two. Because it is possible to remove easily, I think that I will enjoy two ways of Style according to the mood.
View detail
It seems to be easy touring in winter.
Installation was easy
But you need to adjust the Mirror after installation, because the Opposite Thread ScrewSpec. is Large ?.
View detail
A must for high speed touring!
It is easier if you finish the work that can be done indoors before going to the Garage.
If you set the height to the highest, the wind will escape on the Helmet.
When you lower it to the bottom, it will come loose around your neck.
Either way, it will help reduce the fatigue of riding NAKED!
View detail
Z900 RS Cafe racer
Chic Design's headlight fairing produces most of the round-light street cars, allowing the car to be converted from the shape of a street car to the appearance of a Café racer, creating a style you like, and reducing the wind generated when riding a street car. To achieve the effect of stabilizing the body, it is recommended that you buy and install it! ------------------------------------- --------- Chic Design headlight fairing produced most of the round lights street car, so the car can be converted from a street car styling the appearance Café racer, creating their favorite style, and can reduce the wind is generated when the street car ride pressure to stabilize the body effect, we recommend to buy the installation! Powered by Google Translator View detail