Reviews
Good!!!
High quality,, design. But it need some alteration,lower hole position.(t100, 2022) I'm very satisfied.❤️ I wish you all the best!!! View detail
GUYRA Gauntlet combines practicality and artistry
First of all, the windproof effect is quite high and it looks Large sturdy with spring/summer gloves until we hit midwinter! (Grip heater is on though).
No shaking or bracket gapping at high speeds, so you can concentrate on driving with peace of mind!
As for the installation, as explained above, you only need to tighten the Mirror Bracket, so if it is a Normal mirror, it can be installed with perfect clearance without interfering with the Accelerator Wire and Clutch!
I am wearing YOSHIMURA's Smoke Screen, and I think it matches well with the Smoke Screen and has a high dress-up effect.
I use a sv650 for work, so I was wondering what to do to protect it especially in the middle of winter. I know that the combination of a Handlebar Cover and Grip heater is the best, but it lacks a little in appearance and operability, so when I found the GUYRA Gauntlet, I bought it immediately.
If you are wondering about purchasing the product, I am sure you will be glad you installed it.
View detail
Very solid.
It attaches securely with a 3-point fastener. The paint is also very beautiful. View detail
Parts you can't do without
The RubberWasher at the mounting point of CHIC DESIGN's Road Comet 2 for CB1100RS has broken off due to age-related deterioration.
Repair Parts, but I wouldn't want to be without them! Good to have.
View detail
It is solidly built
Installation is also a simple matter of replacing the Headlight Bolt with the supplied Bolt and installing the Bracket next to the Horn to make it fit.
The position of the reserve tank was changed to a universal bracket because the handlebar had been replaced with a BEET taper handlebar and the included bracket would have come in contact with the cowl.
Cowl has no complaints at all, the paint is in good condition.
No rattling and no chatter noise at high speeds.
However, there is some tampering from wind pressure, but it is acceptable.
View detail
Different from Image …
The FRP inner stay also cracked during use, so I wonder about its durability. I'm not sure about its durability. Now I replaced it with Bikini cowl. View detail
Periodic replacement
Purchased for regular replacement. replaced after 3-4 years of use. For this Gold price, I should have replaced it earlier. View detail
Screen with high functionality.
I don't like the way it looks at all, but it was reputed to be windproof, so I gave it a try.
Frankly speaking, there are many cars that would not suit this design, but why is it so popular?
It is effective in winter and on windy days in early spring.
I don't use it myself, but I would recommend it to Riders who ride at high speeds.
good point
Lightweight and durable due to its polycarbonate construction.
Highly windproof.
The shape of the building is calculated for the flow of wind.
Easy to install.
Windproof, so you won't get tired on long-distance touring.
A bad point
Design is not to be liked or disliked.
Expensive.
I wrote "Design", but I think Parenthesis will be better if Sticker and Decal are applied.
Performance is perfect.
View detail
RubberWasher
I bought it to prevent vibration and scratches.
Quantity:1 Set of 4pcs. is reasonably priced and useful for periodic replacement for repair.
View detail
L size was chosen although it wavered in medium size and L size.
L size was chosen although it wavered in medium size and L size. View detail
He wanted to come to equip a bikini cowl for a makeover, and it wavered with the blaster II and this product of N project. It regarded suiting round touch of a zephyr after all as it being this, and it decided on the road comet. managing contracto
He wanted to come to equip a bikini cowl for a makeover, and it wavered with the blaster II and this product of N project.
It regarded suiting round touch of a zephyr after all as it being this, and it decided on the road comet.
managing contractor painter of the daytona was used for paint application.
The line was not painted but was substituted for the commercial cutting sheet.
When equipped, appearance changed at a stretch and became like another motorcycle! Since * wearing which is very pleasing is easy, it is also pleasant that it can attach by feeling or cannot attach.
Although most protection-against-wind effects were not expected, when having ridden for a long time, I think that fatigue stopped accumulating as before!
View detail
Picture up was carried out. It is such touch when it compares that it is pure.
Picture up was carried out.
It is such touch when it compares that it is pure.
View detail
Road Comet
I ordered one for my Z900RS and it took me 4 months to get it, the design is perfect but some of the details are a little rough, which is a little disappointing. I made it by myself. The windproof effect is limited, but it makes a LARGE difference. I am looking forward to long touring in summer. View detail
Performance is adequate.
I bought it for winter protection in the Kanto area and never froze when used with winter Gloves, which are not that thick.
Installation is also easy, as long as the RightMirror is co-tightened with the Mirror and the RightMirror has an Opposite Thread Screw.
The Bracket is solid and the Screen is strong enough to touch.
As is the fate of the SR400, the engine vibration is fine but shaky.
View detail
Z900RS Road Comet
It was not difficult to install, as the three locations were secure and the holes were perfectly aligned.
The paint is beautiful and I am glad I bought it.
View detail
Cushion
I bought this to prevent Fixing Screw from loosening due to vibration and to prevent Wound.:1 Set of 4pcs., good product at a reasonable price. View detail
Beautiful addition to a ZR7
Ordered the fairing back in October and it arrived in December since it was made to order. The paint match was on point and my bike absolutely looks more classic. People can't believe it's twenty years old either. From a functional standpoint the fairing reduces total wind pressure on my chest. It covers the gauges to reduce sun glare, and it's not noisy. No noticeable reduction in fuel efficiency, and easy to install. I do not drive at unreasonable speed, and would not recommend you do either given that this piece is plastic. Great buy. If there were one improvement to make, it would be to use nylon lock nuts to hold the shield since there is a lot of vibration transmitted through the shield. Overall 5/5 satisfaction with my purchase 5/5 aesthetic 5/5 accuracy 5/5 function 4/5 plastic chassis instead of aluminum 4/5 hardware for mounting and shield View detail
Fits: その他 , YAMAHA SR500, YAMAHA SR400, SUZUKI ST250, SUZUKI VOLTY, KAWASAKI W650, KAWASAKI W400, KAWASAKI ESTRELLA
Used for MeguroK3
Classic fenderFront from the same manufacturer (WW-FF1GEL) It was used in conjunction with
Holes were drilled using a method that came up in a Net search, using masking tape.
The gap between the thickness of the Plate and the Bracket is not Exactly, so the Plate moves around when assembled properly.
If you are concerned about this, you should twist the Bracket to assemble it, or adjust it by collapsing the gap between the Bracket.
Plate will peel off color quickly during assembly.
View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
Used for MeguroK3
Made of FRP.
The position of the mounting holes is correct, but the width from RightFork to LeftFork and the width of Fender are not Exactly, so it can be installed as it is, but it may be necessary to put a Spacer in between.
The top of the Fender hits the Fork, so if you are concerned about this, you may want to use a hit stop.
View detail
Fits: KAWASAKI W800
Used for MeguroK3
Made of FRP.
It can be assembled as it is, but the fender orientation will not match and there will be a gap in the mounting area.
If you want to install it securely, you need to temporarily assemble the later Bolt, align the Fender orientation, and then check the position of the holes in each section before expanding the holes.
Also, a gap of about 3mm will be created in the upper mounting area, so a spacer is required.
As you can see in the product image, there is only Fender and Tail lamp.
We need to think about Blinker.
View detail