Reviews
For winter protection!
The product is very good, as it is compatible with the car model. I bought this product to protect my car from the cold in winter, and it works great and I don't need the electric heating gloves. View detail
GUYRA Gauntlet combines practicality and artistry
First of all, the windproof effect is quite high and it looks Large sturdy with spring/summer gloves until we hit midwinter! (Grip heater is on though).
No shaking or bracket gapping at high speeds, so you can concentrate on driving with peace of mind!
As for the installation, as explained above, you only need to tighten the Mirror Bracket, so if it is a Normal mirror, it can be installed with perfect clearance without interfering with the Accelerator Wire and Clutch!
I am wearing YOSHIMURA's Smoke Screen, and I think it matches well with the Smoke Screen and has a high dress-up effect.
I use a sv650 for work, so I was wondering what to do to protect it especially in the middle of winter. I know that the combination of a Handlebar Cover and Grip heater is the best, but it lacks a little in appearance and operability, so when I found the GUYRA Gauntlet, I bought it immediately.
If you are wondering about purchasing the product, I am sure you will be glad you installed it.
View detail
It seems to be easy touring in winter.
Installation was easy
But you need to adjust the Mirror after installation, because the Opposite Thread ScrewSpec. is Large ?.
View detail
For cold wind protection.
I bought it because I could not stand the strongest cold wave. When I put it on, it didn't look as bad as I thought it would, and I was more than satisfied with the Large effect. The cold wind hitting the fist is reduced, and I think that this is Large sturdy even without Grip heater. It is easy to install and remove, so I recommend it to riders who ride in the middle of winter. View detail
I like the windshield!
[Color] Clear to Screen [Color] I replaced it with a Smoke I think the wind protection effect is Large [Color] It is the only difference of color from Clear's, but it became a good impression with Screen It is a little large feeling, but there is no choice because Motorcycle is Motorcycle None View detail
It needed some modifications!
Handlebar, Mirror, etc... not OEM, so it interferes with things a bit So I tried to add the Nut and it became good However, the Screen [Color] It's Smoke [Color] I bought Clear [Color] I repurchased Smoke View detail
Buy with no loss
[Was there anything that disappointed you?
Nothing special Generally in line with expectations
Do you have any wishes or improvements you would like to make for the Manufacturer?
Currently [Color] With Clear [Color] There are two types of Smoke, but I'd like to see them come in darker colors like DARK
[Do you have any products to compare it to?
Daytona products, I quit because they weren't exclusive products
Frequently Asked Items
What made you decide to buy?
That it was sold as an exclusive product; GUYRA Gauntlet's Naming is cool! (^^) A friend of mine was using a different type, but when I heard that it was very effective, I decided to buy it
How was your experience with it?
The effect is more obvious as the speed increases
If the wind is 10 when you don't have anything on, the windproofing effect is about 80% of the experience, and also after rain The Gloves are less wet and have a definite effect
In my case, I'm trying to fit it in the Handlebar End as much as possible without worrying about it If you put it on, you'll get a much higher wind protection
Was the installation difficult?
Installation is easy by tightening with the Mirror In addition, since the stopper comes out of the mounting bracket for the prevention of circumference, you can use it within the range of motion Can be fitted with a Snap
【Please tell me the installation point and hang】
Please hold down the Mirror by hand to avoid gapping
[Was the Instruction Manual easy to understand?
Yes, it's easy to understand
[Included Parts:were they on?
None
[Others]
It is windproof and has a certain amount of protection from the cold, but when stopped, Quantity:Pair (for Left and Right) The wind from the air is affected by the temperature of the outside air
It's not a good idea to be bought in the same sense as the Handlebar Cover, etc
View detail
Guyra Gauntlet
Excellent quality, very strong and dense material. Installation takes very little time, technically simple. Excellent quality, very strong and dense material. Installation takes very little time, it is technically simple. translated by Google Translator View detail
Fits: HONDA NC750S Dual clutch transmission, HONDA NC700S
Just like OEM Product
Although similar things are out of many Manufacturers, it is a common part that I see often, but perhaps it is the best one. Function, installation method, quality of Body, I think that everything is fine. The only disappointing thing is that the Reverse side of the installation Bolt is exposed so it looks bad. Some people may not be bothered, but I could not forgive, so I decided to use Universal Product Material : Plastic Cover bolt purchased and attached. View detail
It is recommended
It was very good to use for NC 700X, so I purchased it for third generation 2016 type NC 750S although it was not included in the compatible model.
If you were prepared for some modification, there was nothing, it took about 10 minutes with a pon attachment. This product, which is quite expensive, I think that there are also many people who can not be ready to purchase if they are not included in the compatible vehicle type List. Manufacturer, there is no business.
As shown in the photo Simple construction makes installation easy to work together with Back Mirror. Moreover, it can be attached firmly.
Unlike for Off-Road, the rectifying effect on the upper part of Handlebar is high, and wind and rain does not come from cuffs. It also covers the Clutch Wire part where rain and dust easily enter.
In the winter, thanks to windbreak effects, cheap Winter Gloves never freezes like it hurts your hands.
In the case of my choice Clear type, I do not feel much to wear, so I am honored that it does not damage the neat feel of Naked motorcycle.
One thing that is worrisome is Quantity which fixes Polycarbonate Body and iron Bracket : Since 2 pc Stainless bolt Nut has no locking prevention, apply locking material, put Spring Washer, exchange with M6's loosening Nylon nut etc. etc. It seems better to take countermeasures. I chose Nylon nut.
I sell various Knuckle guards, but I personally think that this is the best.
View detail
I think that shape, Large Kimono etc..
I ran the highway at the end of the year and I could not stand the coldness of my fingertips so much.
After installation, I can not run with cold Timing but there is a feeling that the wind is not hit.
View detail
Windproof - Effective for cold weather
Commuting CB 750 (RC42) I installed it on, but the wetness of Gloves at the time of rain certainly decreased.
Because the normal winter gloves kept the warmth sufficient enough for touring roundtrip 250 km, so windproof - I think that the effect of cold weather is high. Easy to windbreak position with Bracket of vehicle type Exclusive Design - Considering that it can be mounted securely and taking into consideration the fact that it is larger than the Universal Product, I think Cost performance is high.
View detail
Impression over the winter
Purchased in December 2015. Used in 2003 type XJR 1300.
The area around Handlebar remains OEM. Is the attached handwritten style Illustration?
Attached Instruction Manual wear after reading. Do not scratch with Lever,
I installed it but it takes less than 30 minutes to complete.
I used it with Yamaha OEMGrip heater.
It is the result of using the outside temperature less than 10 degrees ~ 0 degrees,
Since we have poor circulation of fingertips, with the heat of Heater alone,
Although it is uneasy even in cold weather in spring,
Since the running wind does not hit the fingers and goes upward from the elbow,
It was very nice that my fingers did not get caught.
Also, Gloves is hard to get wet with Touring in rain,
It was very useful. From time to time,
It is enough to tighten it upright by vibration or not.
View detail
Fairly satisfied
I knew Handlebar Cover's cold and rainproof effect well, but I did not attach Silhouette with Cover on both ends of Handlebar because it looks awkward. This product is more transparent than I imagined, it does not insist so much even if it is attached, the installation method is also very simple. It is good to Cover the Wire exposed part of Brake lever.
The only disadvantage of the only Large is that when you attach the HondaOEMLong Screen you can not hit the Screen and completely disconnect the Handlebar, as well as you can not use the Handlebar Lock. Other Manufacturer's Screen may have the same trouble.
Because GUYRA Gauntlet was more important to me, I switched Long Screen back to NORMAL. I think it's a good product.
View detail
CHIC DESIGN 's Knuckle guard It' s pretty nice ~
Today was cold from the morning, the outside temperature was 5 degrees at 10 o'clock,
I ran high speed for about 1 hour but soloTwo was able to be done without hurting my hands.
It is perfect for winter as the wind does not hit the hands.
View detail
I regreted to mount this product for a long time for their appearance. But I've purchased them at last because I'm no longer young enough to stand the cold. First, it offers great wind protection. Even at 2℅ Celsius there is no need to t
I regreted to mount this product for a long time for their appearance. But I've purchased them at last because I'm no longer young enough to stand the cold.
First, it offers great wind protection.
Even at 2℅ Celsius there is no need to turn the heater grip on at high level.
(Before mounting it, my hands were freezing even with the heater grip switched on at the highest level.)
The mounting bracket is thick enough for durability.
(Width of the bracket is 4.5mm.)
It won't wobble against wind.
It would've been better if the bracket was made from stainless steel.
There is space between the level and knuckle guard so that your fingers won't get hooked on to the knuckle guard.
(The KOSO knuckle guard I mounted to my Majesty125 had little space between the two parts so I got my finger hooked between them every now and then.)
I recommend it to riders who want more comfort when riding in the cold season.
View detail
Fits: HONDA NC750X Dual clutch transmission, HONDA NC700X
I only see reviews from the front, the side, the space around the handles, but the design when seen from the side is put into consideration. When seen from the side, the front of the guard becomes a straight line, and isn't bent backwards or anything. I k
I only see reviews from the front, the side, the space around the handles, but the design when seen from the side is put into consideration. When seen from the side, the front of the guard becomes a straight line, and isn't bent backwards or anything. I know I'm focusing on the minor details, but these characteristics shows me that the manufacturers care about their products.
The product lived up to my expectations.
It blocks the wind, so even without a grip heater, with just winter gloves your hands won't get cold.
I went fast in 0 degrees temperature for a while, and of course it was cold, but was never cold due to the wind, and the need to warm my hands with a cup of hot tea at SA/PA is now gone.
View detail
Seemingly the form of a Stay is different for every vehicle type, and it is attached firmly. Although it is a degree of the effect, the Glove for summer also with high sealing performance of an alder Cover is also OK truly. A wind and rain have no r
Seemingly the form of a Stay is different for every vehicle type, and it is attached firmly.
Although it is a degree of the
effect, the Glove for summer also with high sealing performance of an alder Cover is also OK truly.
A wind and rain have no relation.
However, if a hand is extracted during a run, when putting in shortly, it is hard to put in, and troubles are suffered.
If high-speed, it forbids strictly.
Gantt did the Glove for winter.
Because the wind has escaped up and down in the form of the main part if it enters at high speed, it is rare for a wind to be equivalent to the shell and fingertip of a hand, as the effect of emasculation has come out of the grip part.
since -- a finger did not die of a long distance.
(A fingertip did not carry out Jingjing) The glove was damp, after seldom getting wet and getting down from the interchange, while running about
rain.
Gantt who can also do the measure against protection against the cold can evaluate without taking the freedom of a hand like
alder Cover.
View detail
[Webike Monitor] At the time of the high speed operation of the winter season, for abolishing that the feeling of a fingertip is lost was considered and it purchased. Attachment is also easy, a Design's is good and very pleasing. As protection
[Webike Monitor] At the time of the high speed operation of the
winter season, for abolishing that the feeling of a fingertip is lost was considered and it purchased.
Attachment is also easy, a Design's is good and very pleasing.
As protection against the cold of a fingertip, it has actually been very much satisfied with high speed operation.
I think that it is the elegance which may be bought.
View detail
It was considered how it would be coped with in first winter. Attachment removed and sandwiched the Mirror, and it has equipped with it easily as it attached again. The Brake side also only turned the Throttle wire under some. A Style is also pleasing
It was considered how it would be coped with in first winter. Attachment removed and sandwiched the Mirror, and it has equipped with it easily as it attached again. The Brake side also only turned the Throttle wire under some. A Style is also pleasing and it is likely to meet the expectation of the measure against cold. View detail