Reviews
Fits: HONDA NC750S Dual clutch transmission, HONDA NC700S
Just like OEM Product
Although similar things are out of many Manufacturers, it is a common part that I see often, but perhaps it is the best one. Function, installation method, quality of Body, I think that everything is fine. The only disappointing thing is that the Reverse side of the installation Bolt is exposed so it looks bad. Some people may not be bothered, but I could not forgive, so I decided to use Universal Product Material : Plastic Cover bolt purchased and attached. View detail
It is recommended
It was very good to use for NC 700X, so I purchased it for third generation 2016 type NC 750S although it was not included in the compatible model.
If you were prepared for some modification, there was nothing, it took about 10 minutes with a pon attachment. This product, which is quite expensive, I think that there are also many people who can not be ready to purchase if they are not included in the compatible vehicle type List. Manufacturer, there is no business.
As shown in the photo Simple construction makes installation easy to work together with Back Mirror. Moreover, it can be attached firmly.
Unlike for Off-Road, the rectifying effect on the upper part of Handlebar is high, and wind and rain does not come from cuffs. It also covers the Clutch Wire part where rain and dust easily enter.
In the winter, thanks to windbreak effects, cheap Winter Gloves never freezes like it hurts your hands.
In the case of my choice Clear type, I do not feel much to wear, so I am honored that it does not damage the neat feel of Naked motorcycle.
One thing that is worrisome is Quantity which fixes Polycarbonate Body and iron Bracket : Since 2 pc Stainless bolt Nut has no locking prevention, apply locking material, put Spring Washer, exchange with M6's loosening Nylon nut etc. etc. It seems better to take countermeasures. I chose Nylon nut.
I sell various Knuckle guards, but I personally think that this is the best.
View detail
It was subtle.
I installed in XSR 900.
I installed it in wind protection main in winter, but the coldness of hand got relieved somewhat.
Bracket is holding and the circumference of Handlebar gets messed up.
The shape of Bracket is not good
It was not satisfactory to join MirrorNut together..
The price is also a bit high.
Currently undone.
View detail
I think that shape, Large Kimono etc..
I ran the highway at the end of the year and I could not stand the coldness of my fingertips so much.
After installation, I can not run with cold Timing but there is a feeling that the wind is not hit.
View detail
Windproof - Effective for cold weather
Commuting CB 750 (RC42) I installed it on, but the wetness of Gloves at the time of rain certainly decreased.
Because the normal winter gloves kept the warmth sufficient enough for touring roundtrip 250 km, so windproof - I think that the effect of cold weather is high. Easy to windbreak position with Bracket of vehicle type Exclusive Design - Considering that it can be mounted securely and taking into consideration the fact that it is larger than the Universal Product, I think Cost performance is high.
View detail
Impression over the winter
Purchased in December 2015. Used in 2003 type XJR 1300.
The area around Handlebar remains OEM. Is the attached handwritten style Illustration?
Attached Instruction Manual wear after reading. Do not scratch with Lever,
I installed it but it takes less than 30 minutes to complete.
I used it with Yamaha OEMGrip heater.
It is the result of using the outside temperature less than 10 degrees ~ 0 degrees,
Since we have poor circulation of fingertips, with the heat of Heater alone,
Although it is uneasy even in cold weather in spring,
Since the running wind does not hit the fingers and goes upward from the elbow,
It was very nice that my fingers did not get caught.
Also, Gloves is hard to get wet with Touring in rain,
It was very useful. From time to time,
It is enough to tighten it upright by vibration or not.
View detail
Fairly satisfied
I knew Handlebar Cover's cold and rainproof effect well, but I did not attach Silhouette with Cover on both ends of Handlebar because it looks awkward. This product is more transparent than I imagined, it does not insist so much even if it is attached, the installation method is also very simple. It is good to Cover the Wire exposed part of Brake lever.
The only disadvantage of the only Large is that when you attach the HondaOEMLong Screen you can not hit the Screen and completely disconnect the Handlebar, as well as you can not use the Handlebar Lock. Other Manufacturer's Screen may have the same trouble.
Because GUYRA Gauntlet was more important to me, I switched Long Screen back to NORMAL. I think it's a good product.
View detail
Fits: HONDA NC750X Dual clutch transmission, HONDA NC700X
Excessive expectation for windproof effect is not permitted
Design is complaint, fitting also fits exactly in DCTExclusive Design. So, I am satisfied about this place.
We did not feel the windproof effect of the most.
As our feeling (I think there are individual differences) ,
Thumb, forefinger, middle finger, essential to the grip holding
The wind hangs over. Various mounting angles etc.
I tried it..
We were wearing the Long Screen of us GIVI,
As described by Manufacturer, it was not possible to use it together. Why should I develop a long screen that Manufacturer can use together - - -. It is good if it can be done easily by cutting, but as we bought it all the time, we are selecting the small wind protection effect at hand from the chest.
Design and Push Guard effects ★ 3, but as a windbreak effect ★ 2.
View detail
Unexpected functionality
Large From 13:00 to around 16:00 on New Year's Eve,
Running almost continuously in the condition of outside temperature 3 ° C.
In the last few years, at ManufacturerOEM's Grip heater,
I was warming the palm, but with the running wind hitting the back of the hand,
I could not say it to a sharp poke.
After wearing Gantt let, turn off Grip heater and run for a while.
Helmet and the position of Gantt let, against Grip,
I thought that it was way too high, but I actually ran and went on to the point of intersection.
Between the OEM's Mirror and Gantt let, running wind comes in,
Just around the back of the hand, with the feeling that the wind flows,
There was nothing to grab hands. For Grip heater combined use,
The state of shine continued. Because it was a sunny day,
If it is below freezing point, it may be slightly different,
I did not replace it with electric heating Gloves.
There are four stars, 1. Increased price, 2. Washer class (Especially Rubber type) But,
Mirror side also wanted, fine vibration in the signal wait,
It is transmitted from Mirror and Chatter sound is made. Otherwise there is no problem.
View detail
Although I purchased by mistake, the result is good.
Although I knew the existence of this product from before, I thought that the size is too large Image There was an image, but I refrained from purchasing, but if I think now to the Z250 which is well stopped next to me in the workplace Motorcycle Place, the products of other companies But I saw Knuckle guard wearing it and thought that it would be inconspicuous if it was this Large I thought I'd buy it when it got cold.
After that I turned to cold to face midwinter and purchased it without noticing my misunderstanding. Unpacking and first impression "Deca, wrong" However [I bought it and it is OK if windbreak effect is Large, so winter is OK OK if summer is ok] I tried installing it by saying that the hand was not cold and the windproof effect was good.
I purchased it from the misunderstanding but it is a recommended item with what I use.
View detail
CHIC DESIGN 's Knuckle guard It' s pretty nice ~
Today was cold from the morning, the outside temperature was 5 degrees at 10 o'clock,
I ran high speed for about 1 hour but soloTwo was able to be done without hurting my hands.
It is perfect for winter as the wind does not hit the hands.
View detail
No discomfort!
Installed in 09 VTR 250 of Kami!
There is reasonable wind and moderate temperature (About 12 ° C) It seems that there was no dramatic change in the city.
I am expecting windproof effect by highway driving.
I thought it was a little disagreeable, but I did not feel so uncomfortable. I wonder if it was made Smoke. Installation is simple. The upper Nut was a reverse screw.
View detail
Pain prevention by missiles in windproof effect
I think that there is quite a windproof effect.
I tried a long distance ride in January,
There is nothing different from Large.
, But the fingertips do not necessarily do ginseng.
It is OK even if you change from thick gloves to difficult to operate Gloves for winter with good operability.
I think that it would be even better if there is Grip heater.
However, it does not prevail against Handlebar Gloves...
View detail
I regreted to mount this product for a long time for their appearance. But I've purchased them at last because I'm no longer young enough to stand the cold. First, it offers great wind protection. Even at 2℅ Celsius there is no need to t
I regreted to mount this product for a long time for their appearance. But I've purchased them at last because I'm no longer young enough to stand the cold.
First, it offers great wind protection.
Even at 2℅ Celsius there is no need to turn the heater grip on at high level.
(Before mounting it, my hands were freezing even with the heater grip switched on at the highest level.)
The mounting bracket is thick enough for durability.
(Width of the bracket is 4.5mm.)
It won't wobble against wind.
It would've been better if the bracket was made from stainless steel.
There is space between the level and knuckle guard so that your fingers won't get hooked on to the knuckle guard.
(The KOSO knuckle guard I mounted to my Majesty125 had little space between the two parts so I got my finger hooked between them every now and then.)
I recommend it to riders who want more comfort when riding in the cold season.
View detail
Instructions easy to sort out even though only in Japanese. Some installation advice: 1) I placed the large rubber washers between the bracket and the plastic guard itself. 2) Honda NC mirror stalks are hard to understand! The simplest method is to co
Instructions easy to sort out even though only in Japanese. Some installation advice: 1) I placed the large rubber washers between the bracket and the plastic guard itself. 2) Honda NC mirror stalks are hard to understand! The simplest method is to completely remove the mirror by undoing the top nut and spinning off the mirror - this is LEFT HAND THREAD - so turn your 14mm open-end spanner as if tightening a normal nut. Once the is mirror safely on the bench unbolt the remaining right hand thread bolt from the bar with a ring spanner. Fit the bracket and replace the RHT bolt; tighten. Fit mirror with LHT bolt; tighten while adjusting for view. Much easier this way! Item is good quality (although I might have expected the mounts to be of lighter material eg. aluminium, titanium) and they fit well. Seem to do adequate job of protecting my hands and the looks fit the sporty 700S model well (better than big black buckets). I think I made a good purchase. View detail
Fits: HONDA NC750X Dual clutch transmission, HONDA NC700X
I only see reviews from the front, the side, the space around the handles, but the design when seen from the side is put into consideration. When seen from the side, the front of the guard becomes a straight line, and isn't bent backwards or anything. I k
I only see reviews from the front, the side, the space around the handles, but the design when seen from the side is put into consideration. When seen from the side, the front of the guard becomes a straight line, and isn't bent backwards or anything. I know I'm focusing on the minor details, but these characteristics shows me that the manufacturers care about their products.
The product lived up to my expectations.
It blocks the wind, so even without a grip heater, with just winter gloves your hands won't get cold.
I went fast in 0 degrees temperature for a while, and of course it was cold, but was never cold due to the wind, and the need to warm my hands with a cup of hot tea at SA/PA is now gone.
View detail
I purchased it for protection against the cold. I used it on the highway and it shuts out the wind completely. It has excellent anti wind effect. Also due to its designed by model structure, the brackets will fit greatly with the master cylind
I purchased it for protection against the cold.
I used it on the highway and it shuts out the wind completely. It has excellent anti wind effect.
Also due to its designed by model structure, the brackets will fit greatly with the master cylinder.
The one thing that bothered me would be the surface. The paint fitting is not good. There seems to be no problem with the painting so it might be the treatment surface causing it. Also the instruction didn't show in which order to mount the washer.
Well, the conclusion is that it has greatly decreased the stress to my hand and I'm going to use it all year round.
View detail
This product is absolutely great to decorate the vehicle. It will also guard your hands from leaves and twigs that pop out when driving through narrow roads. It has a strong structure but it's nice to know that you can purchase repair parts just in case.
This product is absolutely great to decorate the vehicle. It will also guard your hands from leaves and twigs that pop out when driving through narrow roads. It has a strong structure but it's nice to know that you can purchase repair parts just in case. Despite the fact it's designed by model, the bracket interfered with the axle wire on my 2008 year model. I got it installed at a bike shop but it's really tight.
I don't feel any change in protection against the wind or cold temperature but I think it's better to have them than nothing.
View detail
Fits: HONDA NC750X Dual clutch transmission, HONDA NC700X
It must not correspond to a pure High speed steel clean, but must cut a Screen substantially. Although it is not an Items suitable for the beginners, to people with the capability whose processing is possible by itself, it is so so. It is the result
It must not correspond to a pure High speed steel clean, but must cut a Screen substantially.
Although it is not an Items suitable for the
beginners, to people with the capability whose processing is possible by itself, it is so so.
It is the result excellent as a
Knuckle visor.
View detail
Fits: HONDA NC750X Dual clutch transmission, HONDA NC700X
Dramatically, attachment is simplicity and a stormy effect is [ in an Outclassing ] very comfortable at combined use with a Grip heater! Probably, the direction without maintenance experience which must interfere in case of , however the High-speed-st
Dramatically, attachment is simplicity and a stormy effect is [ in an Outclassing ] very comfortable at combined use with a Grip heater! Probably, the direction without maintenance experience which must interfere in case of
, however the High-speed-steel-clean attachment vehicle of an Option, and must delete the Screen side considerably will be good to request a Motorcycle store etc.
View detail