Reviews
Fits: HONDA NC700S, HONDA NC700X, HONDA NC750S, HONDA NC750X
Should have been installed from the time I purchased my new car.
I am the Owner of an NC750X 2016 RC90.
When washing the car, I noticed that the Radiator core guard was deformed by about 2 cm square.
We assume that the front wheel was crushed by a bouncing stone or an insect Attack.
Deformed fins were corrected with Tweezers and peeling paint was repaired with Black's TouchPaint, which is not perfect.
No, but Repair was done in its own way.
However, there was a nagging feeling in my mind that the same thing would happen again in the future.
Worst case scenario is that the Radiator is damaged and damaged to the point of leaking coolant, making it impossible to drive, expensive repairs, etc.
I started to think that I would not be able to enjoy touring because the risk was too large, so I researched risk avoidance measures and found the following
I was just about to... Core guard installed." We arrived at the
I searched the Net for a Core guard that matched my car, and found quite a few products that matched my car, and I referred to the reviews and impressions from among them. "reliability" 、 Quality of manufacture for a secure fit." 、 Validity." I selected this product based on my own criteria.
As a result, we are satisfied with the Large change.
Installation on the Motorcycle was also no problem at all by using the Torque wrench.
After installation, Motorcycle looks a little more elegant (personal opinion).
Above all, I think that the increased peace of mind when touring is the Merit of the Largest.
My one regret is that I should have installed this product immediately when I purchased my new car.
That's what I mean
I feel that the price is well worth it.
Although there are many products to dress-up motorcycles, I think the Radiator core guard should be installed as a top priority.
I would like to thank Manufacturer for developing a good product.
View detail
It should be a dedicated Size, but it didn't work.
[How is it used?
To prevent RadiatorCore crushing.
Was the one you received as per Image?
It is short in depth and a little over 5mm wide.
Was the installation difficult?
Normally, this would be easy, but since there is not enough depth, the bolt is forced to squeeze into the screw threads on the Radiator side at an angle, and the screw threads are likely to be crushed.
How was your experience with it?
It's not a problem if you install it, but it's pretty much forced.
[Included Parts:were they on?
Emblem5 colors.
[Was there anything that disappointed you?
The Size feel did not feel like Exclusive Design.
When I contacted the manufacturer about the above problem, they immediately responded and sent me a new one. Of course, the return and shipping costs were paid by the manufacturer.
Manufacturer's response was excellent.
I bought a 3mm thick RubberWasher at a mass retailer and put it on both SIDES, but it was still a little wide….
Depth, on the contrary, was a little over 1mm tight and became a little over 1mm governor.
The design and making of the nets is good.
View detail
It's well made
I asked the shop to install it. It is a hidden place, but I think it is effective. View detail
I asked YSP to install it.
No stepping stones yet, but I feel secure; unlike OEMOption's Core guard, it covers the entire surface. View detail
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
It's easy to install and custom feel.
So easy to install! The work took about 10 minutes.
However, the instruction manual does not explain the tools to be used, which I think is a little unfriendly. However, I like the custom feel of the product. I will not know how durable and dustproof it is until I use it more often, but I have high expectations for it.
View detail
Radiator guard installation
Installed on a CB650R. It took only 10 minutes to install. It looks high quality and the center part is fine punched so it seems to be effective for small stone bouncing. View detail
If you don't like Large Logo, this is for you!
I don't want Radiator's Core to be crushed, so I'm installing it when the car is delivered.
Many of the products have the Large Logo of Manufacturer, but this product does not, which was the deciding factor for me.
The quality is very good. This was my first time to buy from this Manufacturer and I am satisfied.
The installation requires the removal of the Cowl, so if it is at the time of delivery, I am nervous because it is my first TRY.
View detail
Fits: YAMAHA MT-09, YAMAHA TRACER9 GT, YAMAHA XSR900
Radiator core guard
I like the custom look and feel of the product. View detail
High Quality
The V-Strom 650 was installed immediately after delivery because the Radiator is unprotected.
It was able to be pontooned with high accuracy.
View detail
Fits: HONDA CB1100, HONDA CB1100EX, HONDA CB1100RS
EDGINC FACTORYOil cooler guard
The quality is high and the installation was easy. The ease of installation means that the parts are highly accurate.
The protection is not yet clearly confirmed as the car has not been driven much since it was installed, but I think it is promising.
View detail
Fits: YAMAHA YZF-R1
Very good with a sense of luxury.
I hesitated to buy one from YamahaOEM, but a friend of mine who is an R1 rider recommended this one.
I like the result very much.
Material:Stainless steel gives it a luxurious feel, and the fine mesh in the middle provides good protection, while the large mesh on the edges keeps it from disturbing the cooling system.
The price is also lower than OEM ones, so it is recommended.
The store did the installation, so I don't know how difficult it was to install, etc.
View detail
good performance
Etching factory's machining accuracy is indeed one of a kind.
Rumored to be an OEM source for other PartsManufacturers…
It is still safe to install.
I myself am not a fan of parts with a manufacturer's logo, so I chose the Radiator guard without hesitation.
compared with other materials "Shita" The use of stainless steel, which is superior in terms of both protection performance and cooling efficiency, makes this a gem of a product.
No matter how large the motorcycle is, white rust on the radiator will always be present, and we highly recommend it when purchasing a new vehicle as a dress-up blindfold.
The installation is introduced in the video Siteetc., so if you are familiar with tinkering with machines, you should be able to install it in about an hour.
View detail
Strong!!!! Control!!! Cool!!!! Clear!!!!
[How is it used?
Purchased to attach USB fan to Oil cooler to prevent heat leakage
Was the one you received as per Image?
Cheap AGRAS is not shown in the Logo only image as it does not show the overall shape.
High YOSHIMURA is Pass because the Y-shaped hole is not suitable for Screw installation.
It was a process of elimination, but I was able to install the USB fan by simply screwing it in place as shown in the image.
Was the installation difficult?
The installation method was explained in the accompanying Instruction Manual with a picture of NAKED
(The Instruction Manual said to ask the store if you are not confident)
The SF one is similar, but it takes a lot of time and effort since you have to remove a lot of things
I thought I could install it by just removing the Cowl on the Left Side of the vehicle body.
Oil coolerLeft the lower side Screw could not be removed properly, so I decided to remove the UnderCenter cowl as well.
It was engaged with the Cowl on the Right Side (not Pin, but a fixed point with an arrow-like hook).
I ended up with Both Sides all Rose Sis.
If you plan to put all the rose shi on from the beginning, I think it will take less than an hour.
(The Instruction Manual says to ask the store if you are not confident)
How was your experience with it?
The product itself is made of sturdy Stainless Steel and will provide good protection from Small stones and hard insects.
In the case of SF, the silver color of the upper part of the Guard can be seen through the hole below the LeftHandlebar.
I also used it to attach a USB fan to prevent heat leakage.
The cooling effect of this was considerable (100 km extended to 300 km).
[Included Parts:were they on?
Colorful LogoSeal will be included when purchased on webike!
[Was there anything that disappointed you?
No disappointments.
Other items that would be helpful
Installation Point or hang
Oil coolerLeft Screw under the UnderCenter cowl requires a very long Extension to be removed from the gap (I didn't have one, so I had to use the whole Rose).
Availability and clarity of Instruction Manual
Instruction Manual is included printed in color
Screw is clearly illustrated with the color circle Mark.
important point
Stainless SteelUncut? Uncut?
The edges are sharp enough to cut your hand, so be careful how you touch them.
Opinions and requests for Items/Manufacturer that should be purchased together
View detail
Radiator core guard has been installed.
Purchased because Radiator core guard was installed.
Note that this is not a text cutout Type.
View detail
I chose it for its Radiator protection and appearance.
There is a Radiator core guard for R7 at OEMOP, but I chose this product because of its appearance.
Installation is a bit tedious since the exterior is removed for installation.
How does it feel? But since the material is Stainless, it seems to protect it.
View detail
Radiator guard
Purchased for a CB650R, the dimensions are perfect and the installation was perfect. I have not noticed any signs of overheating during this summer's ride and I feel that the guard and the cooling system are well balanced. The only thing is that I cut my budget and went with silver, but I think black would have made a tighter holm guard. View detail
Installation from new vehicles is recommended.
I use it on my ZX6R EF model.
It is very easy to install, just attach it via the claws and bolt on top of the Radiator.
The fins of the Radiator are often damaged by flying rocks that cannot be suppressed by the Front Fender alone, or by flying rocks from the car in front. Even if the fins are crushed, it will not affect driving, but it will definitely reduce the cooling performance of the coolant, so it is better to install the Radiator core guard from new.
In addition, in rare cases, the Radiator is damaged by stepping stones and leaks coolant. The Radiator core guard is a must, especially when you are out on a tour, because it takes a lot of time and money to move the wrecker, and it can ruin your happy memories.
There is also a merit that if the Radiator core guard is installed, the fins are less likely to be crushed and the resale value will be better.
As a result, we have not been able to confirm any degradation in cooling performance (less airflow) due to the installation of the Radiator core guard.
The Manufacturer also uses a finer mesh for the center section, which is subject to a lot of stepping stones, and a coarser mesh for the others, so I think there is little difference.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09
frightening sound
When I put it on as described in the manual, it made a terrible rattling sound. On the other hand, it is not good for Radiator, so I removed it. I wonder why they didn't design it in such a way that the Radiator and the Net section can be kept clear.
Too bad, because the quality of the product itself is good.
View detail
The process was very careful and I was more than satisfied with the price.
It's a good priced motorcycle, so you want the right parts.
It was simple and not cheap, and I was more than satisfied with the price.
Installation is easy
View detail
Fits: DUCATI STREETFIGHTER
Is good
It was a challenge to install, but I am pleased with the Design and texture. The airflow is also excellent. View detail