Reviews
Strong!!!! Control!!! Cool!!!! Clear!!!!
[How is it used?
Purchased to attach USB fan to Oil cooler to prevent heat leakage
Was the one you received as per Image?
Cheap AGRAS is not shown in the Logo only image as it does not show the overall shape.
High YOSHIMURA is Pass because the Y-shaped hole is not suitable for Screw installation.
It was a process of elimination, but I was able to install the USB fan by simply screwing it in place as shown in the image.
Was the installation difficult?
The installation method was explained in the accompanying Instruction Manual with a picture of NAKED
(The Instruction Manual said to ask the store if you are not confident)
The SF one is similar, but it takes a lot of time and effort since you have to remove a lot of things
I thought I could install it by just removing the Cowl on the Left Side of the vehicle body.
Oil coolerLeft the lower side Screw could not be removed properly, so I decided to remove the UnderCenter cowl as well.
It was engaged with the Cowl on the Right Side (not Pin, but a fixed point with an arrow-like hook).
I ended up with Both Sides all Rose Sis.
If you plan to put all the rose shi on from the beginning, I think it will take less than an hour.
(The Instruction Manual says to ask the store if you are not confident)
How was your experience with it?
The product itself is made of sturdy Stainless Steel and will provide good protection from Small stones and hard insects.
In the case of SF, the silver color of the upper part of the Guard can be seen through the hole below the LeftHandlebar.
I also used it to attach a USB fan to prevent heat leakage.
The cooling effect of this was considerable (100 km extended to 300 km).
[Included Parts:were they on?
Colorful LogoSeal will be included when purchased on webike!
[Was there anything that disappointed you?
No disappointments.
Other items that would be helpful
Installation Point or hang
Oil coolerLeft Screw under the UnderCenter cowl requires a very long Extension to be removed from the gap (I didn't have one, so I had to use the whole Rose).
Availability and clarity of Instruction Manual
Instruction Manual is included printed in color
Screw is clearly illustrated with the color circle Mark.
important point
Stainless SteelUncut? Uncut?
The edges are sharp enough to cut your hand, so be careful how you touch them.
Opinions and requests for Items/Manufacturer that should be purchased together
View detail
Installation from new vehicles is recommended.
I use it on my ZX6R EF model.
It is very easy to install, just attach it via the claws and bolt on top of the Radiator.
The fins of the Radiator are often damaged by flying rocks that cannot be suppressed by the Front Fender alone, or by flying rocks from the car in front. Even if the fins are crushed, it will not affect driving, but it will definitely reduce the cooling performance of the coolant, so it is better to install the Radiator core guard from new.
In addition, in rare cases, the Radiator is damaged by stepping stones and leaks coolant. The Radiator core guard is a must, especially when you are out on a tour, because it takes a lot of time and money to move the wrecker, and it can ruin your happy memories.
There is also a merit that if the Radiator core guard is installed, the fins are less likely to be crushed and the resale value will be better.
As a result, we have not been able to confirm any degradation in cooling performance (less airflow) due to the installation of the Radiator core guard.
The Manufacturer also uses a finer mesh for the center section, which is subject to a lot of stepping stones, and a coarser mesh for the others, so I think there is little difference.
View detail
Fits: YAMAHA XSR900, YAMAHA MT-09, YAMAHA MT-09
frightening sound
When I put it on as described in the manual, it made a terrible rattling sound. On the other hand, it is not good for Radiator, so I removed it. I wonder why they didn't design it in such a way that the Radiator and the Net section can be kept clear.
Too bad, because the quality of the product itself is good.
View detail
The process was very careful and I was more than satisfied with the price.
It's a good priced motorcycle, so you want the right parts.
It was simple and not cheap, and I was more than satisfied with the price.
Installation is easy
View detail
Fits: DUCATI STREETFIGHTER
Is good
It was a challenge to install, but I am pleased with the Design and texture. The airflow is also excellent. View detail
Silver Color Best Match
I chose Silver color to match with CB1000R's Aluminum color. I was worried about Black color, but I am happy to choose Silver color. As for the protection performance, I think there is enough protection against stepping stones because the middle is fine grained. Also, it is rough at both ends, so cooling performance is not a problem. (As for the performance side, I think that it changes by the way of running, please take it as a reference * It is the impression when using Touring) View detail
Radiator guard
The Screw is very fine and I had a hard time installing it. View detail
About mounting
What's the Bolt that came with it?
What is it?
It wasn't in there.
Where is it?
View detail