Reviews
Weighty.
The product is quite heavy, strong and cosy. View detail
Ideal for fixed Bolt of Generator in TZr50R
[How is it used?
Used during EngineO/H of YAMAHA/TZr50R.
This item is a stainless cap bolt of M5×16mm pich0.8.
The GeneratorBolt of the TZr50R is secured with a + nabe Screw, but it is quite easy to lick.
We decided to replace it with this product.
How was your experience with it?
I used a stainless cap bolt because it is a fixed bolt for the Generator, so I thought it didn't need to be that strong.
No problems at present. We will continue to use it as is.
How did it compare to other products?
I would prefer to replace the OEM Nave Screw with Cap bolt as much as possible as it is surprisingly easy to lick.
[Points to note]
Stainless SteelMaterial, so care should be taken not to apply too much force.
View detail
Cap bolt with high universality.
[How is it used?
When I got my 25 year old PAT225WE, I bought it as a replacement for an OEM bolt (some of them I didn't know where they came from) that had been licked and tired at the corners after maintenance and restoration.
Unlike the steel BlackCap bolt sold at the local home centerretc., the Material:Stainless steel makes it easy to use for fixing the exterior and switches, etc., as it is resistant to rust, and is useful in various places.
Was the one you received as per Image?
As I mentioned above, it is a relatively MAJOR design bolt that can be purchased at home centers nowadays, and it is just like the Image product.
Was the installation difficult?
This is a type of bolt that is detached and attached using a Hexagonal Wrench.
If you have the dedicated tools, it is not difficult to remove and install the bolt, as the removal method is the same as that of the Others bolt.
I think it is becoming the next most popular after the normal convex hex Head Bolt!
How was your experience with it?
Although it is a bolt that is relatively easy to pick at, the stainless steel material makes it harder to lick than a steel cap bolt, and the black color makes it less noticeable when fixing switches and plastic parts, making it a very easy product to use.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
2 Bolts on Package Quantity:The product is sold in each length as a Set.
[Was there anything that disappointed you?
Basically, no.
At one time there was a lot of fuss about corrosion and gnawing depending on the type and characteristics of the Gold genus, but I'm an amateur and don't know much about it.
Other items that would be helpful
Point and hang of installation
It is a convenient bolt that can be used alone or in combination with the FUJI crucible type aluminum spacer.
[Notes]
As with any Bolt, please insert the appropriate tool firmly and deeply into the bolt before attaching or detaching it.
Failure to follow the above will lead to unexpected trouble, such as licking the bolt.
[ITEMS TO BUY TOGETHER
This is a Bolt only product (pack of 2), so if you want to use it where a Nut, Spring washer or Spacer is required, please purchase the necessary items separately.
[Opinions and requests to Manufacturer
Thank you very much for the lineup of various lengths. If you could reduce the price a little more, it would make it easier to purchase large quantities.
View detail
Fits: Others
Highly universal design like a certain manufacturer's OEMBolt
[How is it used?
I purchased the DRC Aluminum Spacer for M6 to go along with the SEROW225WE as a Bolt to match when used to secure the exterior of the SEROW225WE.
The following items are "DRCAluminum spacer and Quantity:The "State used in Set" will be in Review.
Was the one you received as per Image?
As the title suggests, it is a bolt with a Flange that can be turned with an 8mm size Socket or Wrench, I believe that this Flange makes the Large size fit the recess of the Aluminum spacer perfectly, which leads to the sense of unity when the exterior is fixed.
The product was as per the Image.
Was the installation difficult?
The method of use is no different from that of a regular bolt.
How was your experience with it?
I tried to match several different Bolts in combination with Spacer's Spacer made by DRC. Design without being too assertive." Several lengths are relatively easy to come by." Cost per unit performance." I have been using this Bolt in my Spacer vehicle since then.
[Included Parts:were they on?
There are no Included Parts:other than Bolt.
Quantity of 2 Bolts in a Package made of Vinyl:The product is sold in each length as a Set.
[Was there anything that disappointed you?
It is Uniqlo plating, so Rust may occur in some environments, but considering the mature design and cost performance, it is a sufficient product and I have no complaints.
Other items that would be helpful
Point and hang of installation
The aluminum spacer is changed to match the coloring of the location where the bolt is used, and the bolt length is the same as that of the OEMBolt.
[Notes]
Since the head part is 8mm in size, if the proper tool is not used, the corner will be licked and it will not be able to be tightened at the specified torque, and rust will easily occur.
Any Bolt should be carefully tightened or loosened using the proper Size tool.
[ITEMS TO BUY TOGETHER
Naturally, it can also be used with Single Body.
However, I think it will look even better when combined with an aluminum collar, as I did this time.
[Opinions and requests to Manufacturer
Thank you for the lineup of various lengths.:I would appreciate it if you could sell Stainless Steel products.
View detail
Black and hard.
Black and hard.
I know it's short.
It's not about length.
It's hardness, after all.
Black Dye Bolt is my favorite.
I think I'll buy the Black dye solution.
View detail
For installation of Rear Sets
Apparently, a button cap bolt is good for the Rear Sets attachment point to prevent them from getting caught on the shoes, so I used this one.
It's not easy to find these sizes at home centers, so it's nice to be able to choose the size and type in detail at Pinpoint.
View detail
It stands out
It's just a Bolt, but it's beautiful and stands out. View detail
One point
I used it for One point around Handlebar. It is a completely self-sufficient part. View detail
Firmly usable
[How is it used?
I used it when I changed the Silencer on my YAMAHA XJR400R from MotoGEARΦ100 to K2tecΦ86.
The Φ14 thinner Silencer band is now farther away and cannot be handled by the existing Bolt.
We measured the amount of gap and decided to put aluminum collars on the rear suspension and silencer band side to fix them in place.
How was your experience with it?
The measurements were perfect and firmly fixed.
I have also done a good job of Torque management, so I don't think there will be any problems.
How did it compare to other products?
This time I bought 80mm and 50mm.
Home center also sells Bolt, but basically they don't sell P1.25, so you have to buy it at motorcycle supply stores or on the webike.
I think it's good
[Points to note]
Aluminum is surprisingly soft.
Be careful when working with Overtorque, as it can easily be severed when tightened with Overtorque.
View detail
Black
The Black bracket and Silver Fixing Screw stand out, so I bought it to unify them with Black.
Stainless Steel's Black, I couldn't find a place near me that had it, so it was a great help.
View detail
Stainless Steel Fixation
Fixing Screw to be rust resistantMaterial:Replacement with Stainless Steel.
It helps that I can choose the Size I want.
View detail
It didn't have to be Chromoly, though.
Before, we used Stainless cap bolt and nut to fix the silencer of the Exhaust System, but they were chewed and stuck, and we had a hard time to remove them without cutting them with a grinder. I used Chromoly cap bolt and iron lock nut to fix the bolt.
I could have used a regular steel bolt, but I couldn't find a steel cap bolt at any of the home centers in my neighborhood.
View detail
Number theft prevention
A regular Hexagon Bolt would be fine.
Replaced with Torque, which may help a little with theft prevention anyway.
View detail
footpegBolt for Replacement
I have converted to Rear Sets for OEM diversion, but the NORMAL screws were not long enough, so I bought them for replacement.
Posh Screw is written with the proper strength, so I was able to use it with confidence. I have not had any problems so far, even though it is a weight-bearing part.
View detail
Rare Material:Stainless Steel's BlackBolt!
[How is it used?
Since the Headlight Bracket was changed to Black, the Bolt stood out from the Silver one.:I looked for Stainless Steel with Black Painting and finally found it.
Was the one you received as per Image?
It was more matte than Image, but the paint never peeled off and the accuracy is fine.
Was the installation difficult?
The Bracket section requires a collar, but can be used with Bolt On.
How was your experience with it?
I like it better than the NORMAL because it is chic and less noticeable and the paint does not peel off due to tightening.
[Included Parts:were they on?
Nothing.
[Was there anything that disappointed you?
Nothing in particular, but the price aspect is Quantity:1 Set of 2pcs. seems a bit expensive while
▼Material that wasn't even a Screw specialty store.:The Stainless Steel Black Bolt is very appreciated. Especially, the lineup of lengths is also very good.
View detail
Stainless black
I purchased the Grip end Fixing Screw in Black to unify the two.
It is Stainless Steel, Black, and the length was not available at my local shop.
View detail
Good quality
Used to install parts for GPZ900R.
The quality is better than products such as Home center.
View detail
Stainless black
Rust-resistant Stainless Steel for the Fixing Screw.
This type and length and not sold near me, so I bought it here.
View detail
Strong Stainless bolt
It is expensive, but I will try to fasten Cylinder and Head with high tensile Bolt. View detail
Stainless screw
Exhaust SystemFixing Screw is changed to rust-resistant Stainless Steel fixing.
It looks nice and clean now.
Size, length and was not sold nearby, so it was a great help.
View detail