Reviews
One point
I used it for One point around Handlebar. It is a completely self-sufficient part. View detail
It didn't have to be Chromoly, though.
Before, we used Stainless cap bolt and nut to fix the silencer of the Exhaust System, but they were chewed and stuck, and we had a hard time to remove them without cutting them with a grinder. I used Chromoly cap bolt and iron lock nut to fix the bolt.
I could have used a regular steel bolt, but I couldn't find a steel cap bolt at any of the home centers in my neighborhood.
View detail
Stainless black
Rust-resistant Stainless Steel for the Fixing Screw.
This type and length and not sold near me, so I bought it here.
View detail
Long Type
The position of the Rear Sets was changed, and since the spacer was changed, the screws were replaced with longer screws.
It was a great help because long Type is not sold anywhere near me.
View detail
Can be an alternative to OEMBolt.
I replaced the Rear with this high-strength Chromoly Cap Bolt at the same time as the FrontCaliper Mount Bolt.
The OEMMount bolt that was removed is also a cap bolt, so I think it would work well as a replacement.
View detail
I think it looks like a circle.
The OEM mount bolts on the front and rear Brake Caliper were getting dirty with age, so I replaced them with these high-strength Chromoly cap bolts. It looks good, but the trivalent Chromate surface may be prone to rust.
Incidentally, I combined a M 8×18 Washer on the Front caliper side Bolt.
View detail
Mounted on PCX160
I bought this product in GoldPlating because I painted the Exhaust End.
The plating was done well and there was no peeling even when I tightened it with a wrench.
Variation is also abundant, so it is recommended for people who are particular.
View detail
Good for exterior dress-up
I bought it for my MONKEY exterior dress-up and it is used for my chain cover. 24K is a good surface treatment and a good quality material that stands out. There are many different neck lengths to choose from, and you can buy as many as you need. The price is a little pricey, but you can buy the number of pieces you need when you need them, so that's a big help. The shipping costs are also included, so buying in combination is a good deal. View detail
I had it in stock.
Use SP CoNECTO Clamp mount as a smartphone mount for Z900RS I was using the Inch size of the car in order to use it in the car of the transfer because I liked it very much. I needed a Bolt and I bought one. I should have bought a longer one as the length is pretty much Limit. View detail
For Jimny JB23W, it's going to cost less than a commercial hook
The plan to use it is to stop the lining of the rear gate frame of JimnyJB23W, SEA Please note that it's BASS (-ω-)
For some reason, only the Screws here are InchScrew, and it's a special 5/16 that can't be sold anywhere else Size called
I didn't think it was used on Harley
The OEM has a Gezi-Gezi Cap plugged in, but I got a Screw and fixed the luggage We plan to install a bracket that does
I remember seeing a Hook that looked just right in the Home Center somewhere, so I'm going to have to go to Homesen We have to go around
View detail
Fits: Others
Similar to the OEMBolt
I bought it because it was cheaper than the OEMBolt At a glance, it is the same as the OEM, except there is a Flange I can use it normally without any discomfort View detail
Perfect bolts for my headlight
I wanted to upgrade the headlight mounting bolts to good quality cap type. Very happy with these. No rust and still looking perfect after being covered with snow all winter. View detail
A little luxury
Bolt of the attached Parts purchased to replace because it is conspicuous because it is Silver though it is Gold Parts.
It is a golden Gold color.
I am satisfied..
View detail
If Net Mail Order
Plating bolt has tensile strength PlatingChromolyBolt is not in stock first in the home center.
Moreover, the mainstream of M10Size is Screw Pitch 1. Because it is 5 1. If you need 25Pitch and you are in a hurry you can rely on Net mail order.
This time I used it for fixing the Top Bridge.
With Handlebar Spacer's Bolt it's too long so I chose 5 mm shorter.
By the way, OEMBolt is also PlatingChromolyBolt so I think it's better to keep it the same material.
Home centeretc. Using Plating bolt or Stainless bolt may not be able to withstand high Torque.
View detail
Change material of Hexagon Bolt
Previously, I used KITACO 's Hexagon Bolt with Flange as Seol' s Bolt tightening (4 photos Left). Although it is very user-friendly, Material is FlangeSteel Uni-chromeplating, so Screw Mountain collapsed due to desorption several times.
This time purchase Stainless Steel Material made by Posh (Photo RightQuantity : 2pc).
Bolt 's Large Kimachi is smaller than KITACO 10 mm versus Posh 8 mm Small by little. Since the Bolt of the Side cover of KLX is 8 mm, there is no need to change the Large size of Wrench.
Although there is no problem for durability right now, Screw Mountain is scraped slightly. I will consider it as a consumable item and use it.
View detail
Fits: YAMAHA RZ50, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZM50, YAMAHA TZR50, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA XJR400, YAMAHA TZM50, YAMAHA TZR50, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA XJR400
With 4 mm Wrench 1 pc.
Can be mounted with hexagonal 4 mm Wrench 1 pc.
However, it is better to keep the diagonal closure of the circumference as a rule.
Dust and sand are contained in the Screw hole over the years, so when removing the old Screw, I think that it is better to screw this product after removing the dust in the hole. Otherwise, both Male and Female may hurt Screw Mountain.
GoldPlating feels good with Polished, but in my case Tank cap is stained with oil and it is so dirty that even if I wear this product, I could not feel much freshness.
Conclusion - - -
Before changing Screw, you can buy Tank cap!
View detail
I am Gorgeous.
Is Gold a Gold?
So, in order to install Racing hook of Gold of BabyFace, Bolt in Bolt is normal so I chose this item.
Image is according to.
View detail
When Anodized processing of the Outer of the Front fork of VTR1000F was carried out at a Gold, since it was unsatisfactory, it exchanged for this Bolt with the Silver with a pure Bolt.Since intensity had uneasiness with the Bolt of an Aluminum, there is a
When Anodized processing of the Outer of the Front fork of VTR1000F was carried out at a Gold, since it was unsatisfactory, it exchanged for this Bolt with the Silver with a pure Bolt.Since intensity had uneasiness with the Bolt of an Aluminum, there is a stainless thing and it is satisfied with
Gold color.The
color may also be beautiful.The rest is the durability of a Plating.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA XR100 Motard, HONDA XR50 Motard
Since it is operating and was just going to stand out most, it was dressed up. Color may be vivid. Let's pay and attach careful cautions so that it may not lick, when it shuts, and crowded!
Since it is operating and was just going to stand out most, it was dressed up.
Color may be vivid.
Let's pay and attach careful cautions so that it may not lick, when it shuts, and crowded!
View detail