Reviews
For Tank and Radiator hose
I put it on EXC-F Tank and Radiator hose.
Tank was too thick to apply with other heat shielding Seat, so we applied this one.
Even though it is not as thick as a proper heat shield Seat, so the effect is not half as good, it is still much better than nothing.
I have had a tank deform due to heat and leak gasoline, so I am hoping this will be a solution to that problem.
The radiator hose is close to the exhaust pipe and is not particularly heat-resistant, so coolant blows out quickly, and the heat can cause holes in the hose.
It is very easy to use because it can also be attached to the back of Cowl.
View detail
Adhesive enough
It can be cut to any size, so it can be stretched to fit any location.
The adhesive is firm, so it did not peel off after application.
The heat resistance effect is sufficient and effective in preventing deformation and discoloration of the Under Cowl due to heat from the exhaust pipe.
View detail
GORILLA・Full CowlSpec.
Created a GORILLA Full Cowl vehicle and used it for Cowl and paint protection.
Since the Exhaust pipe on the Over is going through the Limit.
It's not painted yet.
View detail
GORILLA、Full Cowl
I am currently building a GORILLA Full Cowl car and bought this to protect the Cowl and paint from the heat of the Exhaust pipe.
It's not finished yet, but the size is good for Small Type car.
View detail
good
I tried to prevent deterioration of the 2 st Oil tank of the CRM 250 rr due to heat. Because the shape of Tank is not square, it was hard to stretch, but it stuck well. When I touch Tank after running, I feel that the heat has not been transmitted more than before. I will stick to other parts and check the effect. View detail
Thermal insulation tape
When installing the outside RightAir Scoop outside the buell, the intake manifold comes very close to the position, so I bought this product for the prevention of Scoop's dissolution.
Easy to handle, easy to cut with scissors in any shape, you can stick to small places.
It was affixed to Scoop a little Large, I confirmed the engine start condition, but there was no change in shape, securely insulated Scoop and insulated.
I think that it is exactly good for the protection of Under Cowl by the heat from the intake manifold such as SS.
View detail
Thermal insulation tape
Due to the heat from the Engine's Rear bank, the Rear seat got very hot, lacking comfort and buying it for countermeasures.
Just stick it to the Reverse side of Seat, it can be installed very easily, it can be easily cut with scissors so it is easy to match any shape.
When I pasted it, the heat can be reduced considerably and I am very satisfied..
View detail
At such times, Posh is reliable.
I was looking for Heat Insulating Material when exterior of Exhaust System side of DR-Z 400SM was exchanged.
Of course OEM is also good, but consider buying here that it takes time to delivery.
Packaging is frugal, quality is top notch.
You do not have to over-pack it.
What about this Tape?
- Cut to your preferred length
- Since adhesion is not too strong, it is rare to fail
- Moderate Length
- Being able to use it other than exterior
Is this?.
It is nice to be cheap, but if quality is not good it will not be used.
I do not want it when the exterior melts..
On that point, if usability at this price is good, it is 1 pc. I regret that I should buy it (Lol)
View detail
It was used for the sheet flesh side for the measure against heat. Since there is a certain amount of thin elasticity, it is easy to stick also on a curved portion.The heat of hips decreased certainly.Although I think that fuel-tank flesh sid
It was used for the sheet flesh side for the measure against heat.
Since there is a certain amount of thin elasticity, it is easy to stick also on a curved portion.The heat of
hips decreased certainly.Although I think that
fuel-tank flesh side has an easy-to-use Seat type, it is the best for the measure against heat of a fine portion.
View detail
It purchases again as a measure against heat of a Regulator. This is a gadget from which attachment places, such as a part which were dramatically convenient, and curved or curved, are not chosen.This use part was used for the measure against heat of
It purchases again as a measure against heat of a Regulator.
This is a gadget from which attachment places, such as a part which were dramatically convenient, and curved or curved, are not chosen.This use part was used for the measure against heat of the Regulator attached just in front of the Engine.There were only only 3 cm of crevices between an Engine and a Regulator, since there was an example which a Regulator gets burned and damages with engine heat well, the thin griddle of the Aluminum was purchased in advance, the heat-resistant Tape was stuck on this, and preventive measures were carried out.It is used, there is almost no propagation of heat measure before, and it obtained the result which is protecting the Regulator from the engine heat under the blazing heat of midsummer.He is very Satoru Taisho.We recommend you to cope with the direction of Buell riding on this heat-resistant Tape by all means.
View detail
Under the sheet, since having got on by heat was becoming difficult with engine heat to a Frame, it purchased for the measure. In the bottom of the sheet, direct attachment and a Frame stuck this Tape directly under the sheet at the Frame inner side.
Under the sheet, since having got on by heat was becoming difficult with engine heat to a Frame, it purchased for the measure.
In the bottom of the
sheet, direct attachment and a Frame stuck this Tape directly under the sheet at the Frame inner side.
Engine heat was able to be prevented to some extent as expected [
].
-> hot as
touch -- since it is a warm kana grade, it is dramatically satisfactory.
This Tape sticks to the form stuck since there is flattery nature finely.
I think that it sticks on various places and can do since there is also quite a many Tape capacity.
In the direction troubled by
heat, it is very recommended.
View detail