Reviews
Thermal measures!
I installed an Oil Temperature Meter on my NC750X, but I have to pass the WiringCable under the Engine, so I will try this heat resistant tape as a thermal countermeasure. I think it will be no problem. I am also planning to put the heat resistant tape on the Under Cowl of the NC750X because the heat from the exhaust system melts the Under Cowl. View detail
One point
I used it for One point around Handlebar. It is a completely self-sufficient part. View detail
It didn't have to be Chromoly, though.
Before, we used Stainless cap bolt and nut to fix the silencer of the Exhaust System, but they were chewed and stuck, and we had a hard time to remove them without cutting them with a grinder. I used Chromoly cap bolt and iron lock nut to fix the bolt.
I could have used a regular steel bolt, but I couldn't find a steel cap bolt at any of the home centers in my neighborhood.
View detail
For Bolt with Sensor
It is better to fit when turning Bolt with Sensor.
You can turn it without it, and even a homemade tool is Large sturdy, but it is easier to buy one if you can.
View detail
Exactly to Wiring Protection
[How is it used?
When I installed YOSHIMURAOil Temperature Meter on XJR400R, I needed to run the wiring from the back of the engine to the drain bolt to connect to the sensor, but I bought this product to protect the wiring because it is close to the drive unit. I purchased this product to protect the wiring because of its proximity to the drive unit.
How was your experience with it?
The coziness is like a normal Spiral Tube.
It was thicker than I expected, but within the acceptable range. 2m long, so there is quite a bit left over, but it is necessary when customizing electrical systems, so it is good to have it.
How did it compare to other products?
The Spiral Tube was originally included with the Oil Temperature Meter, but it was a bit thicker than the Spiral Tube.
It would be nice to see a little more Size development.
View detail
Stainless black
Rust-resistant Stainless Steel for the Fixing Screw.
This type and length and not sold near me, so I bought it here.
View detail
Long Type
The position of the Rear Sets was changed, and since the spacer was changed, the screws were replaced with longer screws.
It was a great help because long Type is not sold anywhere near me.
View detail
Can be an alternative to OEMBolt.
I replaced the Rear with this high-strength Chromoly Cap Bolt at the same time as the FrontCaliper Mount Bolt.
The OEMMount bolt that was removed is also a cap bolt, so I think it would work well as a replacement.
View detail
I think it looks like a circle.
The OEM mount bolts on the front and rear Brake Caliper were getting dirty with age, so I replaced them with these high-strength Chromoly cap bolts. It looks good, but the trivalent Chromate surface may be prone to rust.
Incidentally, I combined a M 8×18 Washer on the Front caliper side Bolt.
View detail
Frequently used Size.
This size is often used for maintenance of motorcycle and American cars, so if you have one, it will be useful for anything. The size and strength of this bolt will allow you to tighten even the strongest torques without worrying about damaging the bolt. View detail
It's going to stick.
This product can be cut to any size and can be attached to any place of your choice with firm adhesive force, and is heat resistant to prevent deformation and discoloration of the Under Cowl due to the heat of the exhaust pipe. View detail
Mostly satisfied!
[How is it used?
I used it for Under Cowl of YZF-R25 which I use as Racer.
Was the one you received as per Image?
It was just like the Image. The thickness is there and it looks promising.
How was your experience with it?
The adhesive strength is strong there, but if you want to put it on the inside of Under Cowl, be careful because it will come off if you don't degrease it well.
In addition, it is not a problem if the shell of the Silencer hits, but if the exhaust pipe hits directly, it will be burnt. (laughs)
How did it compare to other products?
It's simple and easy, but the ones from Magical and others are thicker and more durable with things like Glass Wool mixed in.
View detail
Mounted on PCX160
I bought this product in GoldPlating because I painted the Exhaust End.
The plating was done well and there was no peeling even when I tightened it with a wrench.
Variation is also abundant, so it is recommended for people who are particular.
View detail
WiringIf you want to put together
I used it on my Yamaha Max star125.
I installed it in order to put together Wiring because it was converted to a bar handle.
It can be installed while turning around because it is spiral.
You can adjust the length to your liking, so you can save the excess for another time.
View detail
It's nice and easy to use.
It is very easy to use, unlike the cheap Crimped Pliers. The Grip is easy to handle and has a very good grip. The Grip is easy to hold and it is easy to crimp. ,. View detail
Good absorption performance.
Large size is very easy to use and absorbency is good in the size of disposable type Dustcloth. Considering the amount and performance, the price is low and excellent convenience is recommended. View detail
I think it's good
I put a large piece of Heat Insulating Material on it and stuck this product around it.
I took this approach because it's relatively easy to cut.
I didn't use it for Motorcycle, but I repaired the Plate part of the GasCooker that had a hole in it from the heat.
It's been about a month now and there is no damage to the tape itself.
It was surprisingly useful, so it's a big deal. (Lol)
But for a few days, I think it was the glue, but the smell was too strong.
View detail
Good for exterior dress-up
I bought it for my MONKEY exterior dress-up and it is used for my chain cover. 24K is a good surface treatment and a good quality material that stands out. There are many different neck lengths to choose from, and you can buy as many as you need. The price is a little pricey, but you can buy the number of pieces you need when you need them, so that's a big help. The shipping costs are also included, so buying in combination is a good deal. View detail
I had it in stock.
Use SP CoNECTO Clamp mount as a smartphone mount for Z900RS I was using the Inch size of the car in order to use it in the car of the transfer because I liked it very much. I needed a Bolt and I bought one. I should have bought a longer one as the length is pretty much Limit. View detail
For Jimny JB23W, it's going to cost less than a commercial hook
The plan to use it is to stop the lining of the rear gate frame of JimnyJB23W, SEA Please note that it's BASS (-ω-)
For some reason, only the Screws here are InchScrew, and it's a special 5/16 that can't be sold anywhere else Size called
I didn't think it was used on Harley
The OEM has a Gezi-Gezi Cap plugged in, but I got a Screw and fixed the luggage We plan to install a bracket that does
I remember seeing a Hook that looked just right in the Home Center somewhere, so I'm going to have to go to Homesen We have to go around
View detail