Reviews
Used for reproduction of old cars with direct cord
[How is it used?
old car (SportsCUB) Used in Restore of
Was the installation difficult?
Both cords are not too difficult to screw in.
Remember to put the Heat Shrink Tube through beforehand.
How was your experience with it?
Once again, I thought it might be a little dangerous since the insulation is taken only by Heat Shrink Tube.
If the Tube is Gapped or frayed and breaks, high voltage is exposed.
Installation location should be noted.
[Included Parts:were they on?
Instruction Manual is provided, so you will not get lost even if it is your first time.
View detail
Plug Identification
Installed on NGK Power cable.
It is convenient for a quick glance.
It was very tight against the cable, so I slid it on with SiliconeLubricant.
It may be a good idea to use pliers or other means to spread them out a bit.
View detail
It's good that Cable doesn't get thicker.
I used it on my 1960's Honda Benly 50 No. C92.
I would like to exchange the whole Ignition coil, but unfortunately OEM Parts does not come out, and I do not understand the Aftermarket parts which fit. In addition, because of the integral type which does not separate Ignition coil and Plug cord, I decided to exchange only Plug cord.
1Plug×Quantity as it has 2 cylinders:2pc. I used the Set.
The Cable joint is also sold by NGK, but the outside diameter of the joint itself is too thick and a little difficult to use! (I think I can Joint that well). 。
The C92 is a 2-cylinder engine, but it has a 360 degree crank, so the Ignition coil is 1pc.
Plug cord also Quantity in the same direction:Since it is 2pc out, NGK's Joint will interfere with it.
I was worried so I went with the CFPosh plug cord joint.
If you use this joint, the outer diameter is only for the Heat Shrink Tube which is covered at the end.
Conversely, NGK's Power cable may have a different outer diameter.
In my case, fortunately, the original Plug cord was thin & the Vintage Style Plug Cord of Guts Chrome that I installed was also thin, so it was just the same outer diameter.
At the time of purchase, I was not aware of this part at all, but future buyers may want to be aware of it.
View detail
Good!
I changed to an external plug cord and I bought this one too
I'm not sure how durable it is, but it's not something that degrades that much, so I think it's a good idea to buy it once
View detail
Moody things
Especially it is not necessary, but do you feel like to shake Number?. That's why I tried putting this on the cheapest among similar items. There is no problem at all. Because the character is smaller than the previous OEM, let's say that it would be better for those who are interested to do things of their preference. View detail
Invisible Fashion
I only know it when I remove the Tank.
In the first place Plug cord itself is the Length that Length will reach to each position, so it will not be mistaken.
It's for self-satisfaction by looking at Maintenance
View detail
At ZEPHYR
Plug cord purchased along with replacement
I could finish without problem for the part used for the code of 7 mm.
It is cheap if you make code exchange of 4 Engine a polite
I think that it will not be damaged by buying it.
View detail
It purchased on the Plug-cord exchange occasion. It is the Level that it is as convenient as understanding by No. a number of or a glance well. If it is a 4-cylinder engine since the price is also handy, you should purchase by all means.
It purchased on the Plug-cord exchange occasion.
It is the Level that it is as convenient as understanding by No. a number of or a glance well.
If it is a 4-cylinder engine since the
price is also handy, you should purchase by all means.
Since two years or more have passed since it purchased, but degradation is not seen so much, aren't they so so goods?
View detail