Reviews
Fits: KAWASAKI ZEPHYR1100
Numbering tube
I ordered Set's thing because attached with Numbering tube, but I can not pass through Plug cord because it is too tight. Since Plug cord is directly attached to Ignition coil, Joint Set is unnecessary. I should have bought it with Single Item without buying it in Set. View detail
Nice color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Good Color
It was a product as I thought. There is no problem with installation and texture is perfect.
Cospa is satisfied well also in terms of price.
Image when I installed it on the car body just like I was satisfied without problems.
View detail
Fits: HONDA GORILLA, HONDA MONKEY
I am satisfied..
Bulb Socket for Headlight of TL 125 this time and I thought that I can divert it.
I changed the terminal of Bullet Terminal slightly and it is using without problems.
View detail
Fits: YAMAHA RZ50, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZM50, YAMAHA TZR50, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA XJR400, YAMAHA TZM50, YAMAHA TZR50, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA XJR400
I am satisfied.
It's simply Bolt so it's enough as a feature.
The color is the color you want, the same color as the ring of the ring and Neck less gold.
Bolt's Length was totally the same Length.
View detail
good
I tried to prevent deterioration of the 2 st Oil tank of the CRM 250 rr due to heat. Because the shape of Tank is not square, it was hard to stretch, but it stuck well. When I touch Tank after running, I feel that the heat has not been transmitted more than before. I will stick to other parts and check the effect. View detail
Satisfied
It is the second purchase as Bolt for Handlebar Post fixing. By replacing Color on Handlebar Post with thing thicker than previous one, Bolt's Length was exhausted and I bought this Posh Stainless Cap Bolt STD Type. M8Stainless cap bolt with things of 80 mm under the neck has things from other companies but I was looking for STD Type so I bought POSH's Bolt. I am satisfied with both price form. View detail
Fits: KAWASAKI EX-4, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800, KAWASAKI EX-4, KAWASAKI W400, KAWASAKI W650, KAWASAKI W800
Since it is POSH's Exhaust System, I tried using the company's one
We used it to exchange to POSH's Full Exhaust System.
Because there are OEMs and other companies' stuff, I think that there is no difference which made Large, but I made it to Gasket of the same Manufacturer.
Especially, there is no leakage of exhaust gas, and it is fully functioning.
View detail
Change material of Hexagon Bolt
Previously, I used KITACO 's Hexagon Bolt with Flange as Seol' s Bolt tightening (4 photos Left). Although it is very user-friendly, Material is FlangeSteel Uni-chromeplating, so Screw Mountain collapsed due to desorption several times.
This time purchase Stainless Steel Material made by Posh (Photo RightQuantity : 2pc).
Bolt 's Large Kimachi is smaller than KITACO 10 mm versus Posh 8 mm Small by little. Since the Bolt of the Side cover of KLX is 8 mm, there is no need to change the Large size of Wrench.
Although there is no problem for durability right now, Screw Mountain is scraped slightly. I will consider it as a consumable item and use it.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It can be purchased easily.
It is not a part to be exchanged, but it was replaced when overhauled. There was somewhat anxiety about the accuracy, but there was no play and it was possible to install without any problems. Manufacturer here is also sold a lot of Mon Keeper's so I am pleased that the range of choice is expanded. View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Purchased slightly cheaper than OEM Product
Since 1 pc of current Nut was ordinary Nut, it was purchased at Set this time, although it was originally OEM purchase schedule, since Posh was slightly cheaper than the estimated price of OEM, it looks like OEM looks like product as a product I do not think View detail
Purchase
I bought this POSHPosh Stainless Cap Bolt STD Type as a Bolt for fixing Handlebar Post. When installing Bracket in Handlebar Post, if you install Spacer under Bracket to secure the distance between Bracket and Tank, OEM Bolt purchased this Posh Stainless Cap Bolt STD Type because Length was not enough.
M8Stainless cap bolt with things under 60 mm above the neck had other things but because I was looking for STD Type Cap bolt I bought this POSH's Bolt.
View detail
Fits: YAMAHA RZ50, YAMAHA XJR1200, YAMAHA XJR1300, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA TZM50, YAMAHA TZR50, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA XJR400, YAMAHA TZM50, YAMAHA TZR50, YAMAHA TZR250, YAMAHA R1-Z, YAMAHA XJR400
With 4 mm Wrench 1 pc.
Can be mounted with hexagonal 4 mm Wrench 1 pc.
However, it is better to keep the diagonal closure of the circumference as a rule.
Dust and sand are contained in the Screw hole over the years, so when removing the old Screw, I think that it is better to screw this product after removing the dust in the hole. Otherwise, both Male and Female may hurt Screw Mountain.
GoldPlating feels good with Polished, but in my case Tank cap is stained with oil and it is so dirty that even if I wear this product, I could not feel much freshness.
Conclusion - - -
Before changing Screw, you can buy Tank cap!
View detail
I am Gorgeous.
Is Gold a Gold?
So, in order to install Racing hook of Gold of BabyFace, Bolt in Bolt is normal so I chose this item.
Image is according to.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA SuperCUB [Super Cub]., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA SuperCUB [Super Cub].
4 LMONKEY installed
4 LMONKEYExhaust System It was replaced at the time of replacement. Especially because there is no trouble and the price is inexpensive, it is exchanging at the time of Exhaust System Dutch for sticking prevention.
Especially it is recommended not to trouble.
View detail
Fits: KAWASAKI GPZ400, KAWASAKI GPz400F/F2, KAWASAKI GPZ400R, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750, KAWASAKI GPZ400, KAWASAKI GPz400F/F2, KAWASAKI GPZ400R, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Zephyr 750
the expendables
I bought it along with the exchange system Exhaust System. I frequently searched for good products with Cost performance so as to Custom, but exhaust Gas has not leaked and can be used without problems and I am satisfied with Large change. View detail
Used for insulation of Fuel Tank
Temperature also rises to protect Gasoline from the heat of Engine
Heat insulated using this product on the back of Fuel Tank.
It is wrapped in a roll and easy to cut to your favorite Size
There is no problem with adhesive strength.
In bad products it may be scratchy with Glass fiber,
This product is excellent in workability without Glass fiber Rose.
View detail
It is not enough with the attached Bolt length...
POSH's License Plate Holder are used in duplicate, so 20 mm Bolt included for fixing SUSLicense Plate purchased 25 mm because it is slightly shorter. Since it is uneasy that the tip of Bolt is not jumping from the head of Nylon Lock Nut moody..... View detail
Thermal insulation tape
When installing the outside RightAir Scoop outside the buell, the intake manifold comes very close to the position, so I bought this product for the prevention of Scoop's dissolution.
Easy to handle, easy to cut with scissors in any shape, you can stick to small places.
It was affixed to Scoop a little Large, I confirmed the engine start condition, but there was no change in shape, securely insulated Scoop and insulated.
I think that it is exactly good for the protection of Under Cowl by the heat from the intake manifold such as SS.
View detail
At ZEPHYR
Plug cord purchased along with replacement
I could finish without problem for the part used for the code of 7 mm.
It is cheap if you make code exchange of 4 Engine a polite
I think that it will not be damaged by buying it.
View detail