Reviews
I've never had a Tie Wrap of this type before.
[How is it used?
Used for several days.
Was the one you received as per Image?
As per Image.
How was your experience with it?
When I replaced the Exhaust System, I had to fix the O2 SensorHarness to the Swing Arm because the layout of the O2 SensorHarness changed, and I found this Double Type Tie Wrap by chance while I was looking for a good way to fix it.
Because it was troublesome to measure the circumference length of Swing Arm of the deformed section, the length uses L397mm with the idea that Large also serves Small. Because the longer was easy to work when I think of workability, although the result was considerably too much, no problem.
The amount of movement of the Tie Wrap itself is large because it cannot be tightened strongly because it is tied together with Harness if it is Single Type, and Swing Arm is not suitable for use because it is a part that operates.
Unlike the Single Type, the Double Type can tie the Swing Arm and Harness separately, which is Merit.
The Swing Arm is tied tightly and fixed, and the Harness is loosely looped so that it can be used as a guide.
[Points to note]
You can choose between White and Black, but Black is used for outdoor use.
How did it compare to other products?
Webike has no competing products and is the only choice.
[Opinions and requests to Manufacturer
I don't need 5 bottles, so I would appreciate it if you could make the price for 3 bottles about 250 yen.
View detail
It's going to stick.
This product can be cut to any size and can be attached to any place of your choice with firm adhesive force, and is heat resistant to prevent deformation and discoloration of the Under Cowl due to the heat of the exhaust pipe. View detail
Plug conversion Adapig
The range of Plug choices is expanding, so the Large variation is very helpful! View detail
tongue-twister
The position of the Blowby tube clashes with the carburetor body.
If you have room in your Air cleaner mounting Space, you can change the angle to accommodate it, but it was too much for mine.
View detail
It can be used for bicycles.
After polishing the brake lever with Water-resistance Paper, use Silicon spray for easy entry! 。 It can also be used for bicycles, and I think it's easier to make subtle adjustments with this on. View detail
Mostly satisfied!
[How is it used?
I used it for Under Cowl of YZF-R25 which I use as Racer.
Was the one you received as per Image?
It was just like the Image. The thickness is there and it looks promising.
How was your experience with it?
The adhesive strength is strong there, but if you want to put it on the inside of Under Cowl, be careful because it will come off if you don't degrease it well.
In addition, it is not a problem if the shell of the Silencer hits, but if the exhaust pipe hits directly, it will be burnt. (laughs)
How did it compare to other products?
It's simple and easy, but the ones from Magical and others are thicker and more durable with things like Glass Wool mixed in.
View detail
Short Brake Lever
The texture of the Cut-out is very good, I shortened it due to the circumstances when I parked it, but there is no problem.
But Brake Lockand Unlock is NORMALLever easier to use.
View detail
It is attached to NGK Power cable, but it is for spare.
As shown in the title, it is the thing which comes with the attachment if NGK Power cable is purchased, but it buys it as a spare.
In the above Cable, I buy it as a spare because I have to change the terminal nut every time I change the Plug.
The item that comes with the NGK Power cable is the YellowGold color, but it is the same here.
This video is of my FZr1000 3GM which is running well.
View detail
Mounted on PCX160
I bought this product in GoldPlating because I painted the Exhaust End.
The plating was done well and there was no peeling even when I tightened it with a wrench.
Variation is also abundant, so it is recommended for people who are particular.
View detail
GORILLA・Full CowlSpec.
Created a GORILLA Full Cowl vehicle and used it for Cowl and paint protection.
Since the Exhaust pipe on the Over is going through the Limit.
It's not painted yet.
View detail
GORILLA、Full Cowl
I am currently building a GORILLA Full Cowl car and bought this to protect the Cowl and paint from the heat of the Exhaust pipe.
It's not finished yet, but the size is good for Small Type car.
View detail
Fits: HONDA livudio, HONDA livudio, HONDA diocesan, HONDA Livudio SR, HONDA Livdio ZX, HONDA livudio, HONDA diocesan, HONDA Livudio SR, HONDA Livdio ZX
For Refresh
I bought it because I replaced the exhaust system for the refresh of LIVE DIOZx.
This is a necessity for Exhaust System replacement.
It's a few hundred dollars, so use it, don't use it, and make it new.
Since the mounting part is pointing downward, I lightly used all-purpose grease to scratch it and then put in the exhaust system.
View detail
Fits: HONDA MONKEY, HONDA MONKEY BAJA, HONDA GORILLA, HONDA MONKEY, HONDA GORILLA
110 Goliaths.
I like GoldLarge.
I've bought a lot of things, but a lot of them are different in color from the pictures.
I've chosen the Gold color for the small items, but the RoseRose color is too tame and not sensible.
View detail
It looks strong.
It is solidly built
However, due to the characteristics of the Engine, the
You'll be wearing a positive attitude.
It is easy to get dirty and may affect the performance.
It looks like you should maintain it regularly.
View detail
A bargain with lots of room!
This is the amount of Tie Band that comes in many cases, so you won't run out and can use it without hesitation. The price for this amount is very reasonable. View detail
It's easier to operate!
I installed this product to replace the OEM Product. It was easy to install and the Instruction Manual with pictures was written in detail. It is easier to operate the Lever than the OEM Product because the Lever position is closer than the OEM Product! It's just my personal opinion... but it was a good purchase. (^O^) View detail
Good absorption performance.
Large size is very easy to use and absorbency is good in the size of disposable type Dustcloth. Considering the amount and performance, the price is low and excellent convenience is recommended. View detail
It looks strong.
I bought a 26 pie Mikuni carburetor and it has an air cleaner with a round cover. It has an air cleaner with a round cover. However, it may be vulnerable to rain and mud, because it is installed in the forward direction. However, it may be vulnerable to rain and mud. View detail
I think it's good
I put a large piece of Heat Insulating Material on it and stuck this product around it.
I took this approach because it's relatively easy to cut.
I didn't use it for Motorcycle, but I repaired the Plate part of the GasCooker that had a hole in it from the heat.
It's been about a month now and there is no damage to the tape itself.
It was surprisingly useful, so it's a big deal. (Lol)
But for a few days, I think it was the glue, but the smell was too strong.
View detail
70?
Surprisingly, LineUp is useful when you need this longer Size.
The Bolt itself is an ordinary Stainless Steel Bolt. It seems to be strong and can be used with confidence.
View detail