Reviews
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
For Blinker installation
I bought it to install PMC's Blinker Bracket for MACH
I couldn't find this size at home center and it's the cheapest, so I chose this one
No glitches. It's just a regular good Nut
View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
Easy and good.
When I defeated Motorcycle, I rubbed footpeg and because I was tall with OEM footpeg because it was too tall I installed footpeg to raise footpeg position because footpeg can not step on far.. I think that it is simple and easy to put on. View detail
Fits: YAMAHA TZM50, YAMAHA RZ50, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
Combined use with Racing position kit is ◎
Purchased to fit the position of footpeg lowered with Racing position kit. Personally, my feet are Small so it may be a little longer. View detail
Fits: YAMAHA TZM50, YAMAHA RZ50, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
Compatibility with Step up ◎
I bought it to match the distance with the NS-1 Step up instrument.
OEM Shift lever was far, but improved by adding this Lever.
The place where I put my feet is Material like Plastic (Perhaps for weight reduction) So, if you roll a Vinyl Tape etc, it will take Grip to some extent, so it is recommended personally.
As a feeling of use, Shift change became much lighter as Lever became longer.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Swingarm - In accordance with the exchange of Rear suspension
Because there was much Rust and dullness,
Swingarm - We exchanged according to the exchange of Rear suspension.
Homsen etc. Although I was glad that I could arrange things that I'd like to match from the last one,
It is far more quick to order this.
Because it was a bit uneasy whether electric corrosion would occur,
Quantity Washer separately attached to Rear suspension : 1pc. I put it one by one..
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Monkey BAJA, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Monkey BAJA
Rigid enough
I exchanged NORMAL 's proximity to Pedal.
The attachment was attached to 10 mm at the end with no problem at all.
Even if it is only 10 mm, I feel quite Large when I actually operate it.
If it extends to the maximum Large, it seems that it will be possible to get a huge off-road boots.
Even if you stretch your eyes it is rigid and has a good operating feeling.
I also tried the cheap Adjustment Pedal of No Brand, but Funafuna
It was not so good.
Before purchasing "Maybe I'll step on Adjuster piece" I do not care
I was worrying about it. The piece does not interfere at all because it is made thin.
View detail
Because Rear Wheel Collar was scraped
I was also worn out and exchanged with Axle Shaft. I'm wearing GInker's 8Inch4jWheel at G Swingarm, but in my case this color interfered and did not enter. Sharpened with a lathe. View detail
Fits: YAMAHA TZR50, YAMAHA TZ50, YAMAHA TZR50, YAMAHA TZ50, YAMAHA TZR50
It became a Back step simply [ attachment ] and easily. An Anodized is also beautiful at very firm structure. When compared with Back-step purchase, it was a very reasonable amount of money, but as a thing, it was felt high a litt
It became a Back step simply [ attachment ] and easily.
An Anodized is also beautiful at very firm structure.
When compared with
Back-step purchase, it was a very reasonable amount of money, but as a
thing, it was felt high a little.
engine performance is satisfactory.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
[Webike Monitor] Exchange with the original manufacturer's product. Slack is prevented with U Nut with the Friction ring.
[Webike Monitor] Exchange with the
original manufacturer's product.
Slack is prevented with U Nut with the
Friction ring.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
It is the structure of preventing slack similarly pure. Since the slack of the Axle Shaft under run is dramatically dangerous, it considers that it is better to exchange together in the case of tire replacement. By a two-piece Set, since a price is also
It is the structure of preventing slack similarly pure. Since the slack of the Axle Shaft under run is dramatically dangerous, it considers that it is better to exchange together in the case of tire replacement. By a two-piece Set, since a price is also cheap, I think that it is good. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
In accordance with exchange of a Swing-arm Shock, he bought it somehow. It is also O that a fear of rusting disappeared.
In accordance with exchange of a Swing-arm Shock, he bought it somehow.
It is also O that a fear of rusting disappeared.
View detail
Fits: YAMAHA TZR50, YAMAHA TZ50, YAMAHA TZR50, YAMAHA TZ50, YAMAHA TZR50
It was used for TZR. Although expectation was seldom carried out, since it is completely different when it actually attaches, it is a surprise. buy it -- it cut.
It was used for TZR.
Although expectation was seldom carried out, since it is completely different when it actually attaches, it is a surprise.
buy it -- it cut.
View detail
Fits: HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
An angle of bank is recommended at the Circuit run which becomes deep. It can adjust now to three steps of low junior and senior high schools. The Position of middle may suit an unfamiliar person and a tall person. one is the top Position
An angle of bank is recommended at the Circuit run which becomes deep.
It can adjust now to three steps of low junior and senior high schools.
The Position of middle may suit an unfamiliar person and a tall person.
one is the top Position, and also together with the Posh:Racing short step kit (2pcs/1set), raised [ furthermore, ] the Position and has ridden.
Since it stops rubbing the
Step, a Motorcycle can be laid down in comfort.
Since it pickpocket-came to be hard of a tiptoe even if banked deeply when the
Position was raised, it is followed as a rule of thumb and he could further earn the angle of bank.
(It is not a translation, either, as a bank should be just deep) It becomes easy to carry out a Knee grip, load migration, etc. also except
Circuit, and operativity improved, and as it is easy to ride and became, it felt.
Since adjustment may be needed in the case of the Change pedal of
LINK type, cautions are required.
View detail
Fits: YAMAHA TZR50, YAMAHA TZ50, YAMAHA TZR50, YAMAHA TZ50, YAMAHA TZR50
It was attached from the time of buying TZR50R with medieval times. Since adjustment is also possible although it becomes a position racier than a pure location and is two steps, it is recommended.
It was attached from the time of buying TZR50R with medieval times.
Since adjustment is also possible although it becomes a position racier than a pure location and is two steps, it is recommended.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
Since it is a nut of locking, there is no fear of loosening by vibration, and it can feel easy and use it.
Since it is a nut of locking, there is no fear of loosening by vibration, and it can feel easy and use it. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Since the original manufacturer's product has rusted, it exchanges. Since it is a stainless nut which does not rust easily, can it use in comfort?
Since the original manufacturer's product has rusted, it exchanges.
Since it is a stainless nut which does not rust easily, can it use in comfort?
View detail
Fits: YAMAHA TZM50, YAMAHA RZ50, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA NS-1, HONDA NSR50, HONDA NSR80
It is good touch. The place which can be adjusted to liking by itself is the highest. Since it is expensive, it is at *4.
It is good touch.
The place which can be adjusted to liking by itself is the highest.
Since it is expensive, it is at *4.
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80, HONDA Ape 100, HONDA Ape 50, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA NS-1, HONDA NSR50, HONDA NSR80
Honestly the product here is too cheap. . . The cfc axle and rear axle of the super cub 110, and a pivot shaft (swing arm shaft). The flange nut of M12 (P:1.25) is being used for the above three shafts!!! A small motorcycle has much freque
Honestly the product here is too cheap.
.
.
The cfc axle and rear axle of the super cub 110, and a pivot shaft (swing arm shaft).
The flange nut of M12 (P:1.25) is being used for the above three shafts!!! A small motorcycle has much frequency of the Tyre exchange.
.
.
If it is repeated, the rust prevention of a pure flange nut will be inferior.
(By contacting a tool, it is for uniqlo plating of a pure nut to exfoliate.)
.
. It becomes indispensable that the direction which owns the super cub 110 reserves the product here since it is).
Of course, the function will be lost if U lock nut (KATACHI of feather located in the female screw partial upper part of a nut was imitated stop loosening preventing function) repeats desorption.
(It is about two desorption and the effect is falling!!!) It is a fault of U lock nut for long-term use to be impossible.
It will be (1) if long-term use is carried out. : Anti-corrosion performance falls and it is (2). : The function of a slack stop also falls and it is (3). : U Locke's feather will hurt and keep an external screw portion (damaging).
It cannot be for not praising the product here which puts a true heart and is sold from the posh shrine which knows such a fault!!! An everyday guide peg,
It is an important point which manages a run of the super cub 110 which is an authentic-Japanese-style commuter's male as an offering of leisure,
The M12(P:1.25)U Locke flange nut which is an important point of body construction parts and which connects three above-mentioned shafts,
They are parts which should be reserved absolutely!!! In order to run in a thoroughgoing attitude, the super cub 110 which should be loved,
The product here cannot be disregarded!!! Since it is required parts absolutely, those who own the super cub 110 cannot be in the degree of recommendation, for not estimating that it is the highest!!!
View detail
Fits: HONDA Ape 100, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard, HONDA Ape 100, HONDA Ape 50, HONDA XR100 Motard, HONDA XR50 Motard
Carrying out step plate wearing, it was one-shot dissolution in Colet wearing that the lever was long distance miss-shifting running fire. Since it was expensive, it was wavering, but he bought it, and it was a correct answer. Ideas goods part? Hi
Carrying out step plate wearing, it was one-shot dissolution in Colet wearing that the lever was long distance miss-shifting running fire.
Since it was expensive, it was wavering, but he bought it, and it was a correct answer.
Ideas goods part? High one is regrettable.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Honda It is use in the monkey. Or [ that those who understand understand that it is pure since it shines with a color and condition is different although it becomes a nonchalant dress-up up ]. I think that it can use all the time in comfort since
Honda It is use in the monkey.
Or [ that those who understand understand that it is pure since it shines with a color and condition is different although it becomes a nonchalant dress-up up ].
I think that it can use all the time in comfort since it does not rust.
View detail