Reviews
Cap bolt gives it a Custom feel.
[How is it used?
The Normal bolt was a little rusty and I purchased this to replace it.
Was the one you received as per Image?
Material:It is Stainless Steel and has the same quality as the Image.
Was the installation difficult?
As long as the specified Torque is adhered to, replacement is easy.
How was your experience with it?
Disassembly of the engine is now easier. Also, it seems less likely to deteriorate over time and looks more Parenthesis.
[Included Parts:were they on?
Not particularly
[Was there anything that disappointed you?
No. Material:Stainless Steel allows maintenance without worrying about rust in the future.
▼KITACO's Bolt with Flange may have been better because it was easier to tighten the Torque evenly.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub]., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub].
A little short.
Material is fine, about the same length as OEM. It may depend on the Flange of the Exhaust System used, but in my case it was a little short. View detail
Front Tappet Cover for Dress-up!
[How is it used?
I bought it for dress-up purposes because the NORMAL Tappet cap is tasteless.
Was the one you received as per Image?
Material:It is aluminum and lightweight, but it is more massive than NORMAL and more luxurious than Image.
Was the installation difficult?
Simply remove and replace the NORMAL Tappet cap.
Material:Since it is Aluminum, it is better to manage Torque in one way or another.
How was your experience with it?
I replaced only the cap on the lower side of the engine because the upper cap of the engine was taken out with Breather Hose 650mm 6mm Diameter.
[Included Parts:were they on?
There is no other.
[Was there anything that disappointed you?
Material when put on and taken off many times.:Since it is aluminum, Wound and paint baldness is a concern.
I chose Red to match with YOSHIMURA's carburetor, but honestly, I thought I should have chosen Silver instead of Red.
Although it is not expected to dramatically improve performance, it can be used as a FloatFloat by casually dress-up your favorite color when you ride.
View detail
Purchased with one exchange for every two Oil exchanges.
I buy it once every 2 oil changes, Element and Drain Washer replacement. I will buy it again because I can use it normally and the cost performance is good. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub]., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub].
At the time of Exhaust System replacement.
When I changed the Exhaust System to Other Brand Product, I changed it together. I changed it to Stainless Steel because it is not easy to remove. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It's neither good nor bad
I used it on my Monkey! I'm not sure about the Reinforced Stud Bolt, but it's good enough for me! View detail
Used to replace oil in DL1000 V-STROM250
I always buy more because sometimes it's hard to order when you forget to buy or change the part number. View detail
Fits: HONDA GROM125, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Necessary enough as an OEM replacement Now we need to verify the durability
[Was there anything that disappointed you?
I have no complaints because it is comparable to OEM products
Do you have any wishes or improvements you would like to make for the Manufacturer?
None in particular
[Do you have any products to compare it to?
OEM Product
What made you decide to buy?
The results of the OEM Product vs. price/quality comparison for replacing consumables at the time of bore up Because it was judged to be good
How was your experience with it?
It's comparable to the OEM that I removed, so I'll be testing its durability in the future
Was the installation difficult?
If you can Bore up, you can do it in a second
【Please tell me the installation point and hang】
None in particular
The only thing you need to do is to torque-manage the installation bolts in the Roller guide at the time of installation Isn't it?
[Was the Instruction Manual easy to understand?
Even if you don't have it, it's not a problem as long as you check the installation conditions beforehand
[Included Parts:were they on?
Included Parts:None
[Others]
None in particular
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Set and easy to use
I bought it to overhaul the Engine of GORILLA this time. It is very good because it is easier to understand and does not need more time to buy with Set than to purchase OEM Parts Number at Rose. View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, HONDA Ape 50, HONDA Ape 100, YAMAHA TZR50, YAMAHA RZ50, KAWASAKI KSR-2, KAWASAKI KSR-1, HONDA NSR80, HONDA NSR50, HONDA NS50F, HONDA NS-1, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 50, HONDA Ape 100, YAMAHA TZR50, YAMAHA RZ50, KAWASAKI KSR-2, KAWASAKI KSR-1
The gold oil filler cap with black clutch cover on APE100 TYPE-D looks great with good attention. I put it for dress-up purpose and to avoid mischief. The oil level gauge is no longer with it, not like the OEM cap. I do not use
The gold oil filler cap with black clutch cover
on APE100 TYPE-D looks great with good attention.
I put it for dress-up purpose and to avoid mischief.
The oil level gauge is no longer with it, not like the OEM cap.
I do not use the level gauge function often,
but I carry the gauge all the time just in case.
I would say this cap should have the oil gauge for this price.
Just a simple cap, hope it to be cheaper.
View detail
Fits: HONDA CB250RS, HONDA RVF400, HONDA VFR400R, HONDA CB1300, HONDA CB400 SUPER FOUR, HONDA AX-1, HONDA CB250RS, HONDA CBR250F, HONDA CBX250RS, HONDA CBX250, HONDA GB250 CLUBMAN, HONDA HORNET250, HONDA JADE, HONDA NSR250R, HONDA VTR1000FVTR1000F FIRESTORM, HONDA X4, KAWASAKI XANTHUS, YAMAHA R1-Z, YAMAHA RZ125, YAMAHA RZ125
A price is also handy and is a reliable Brand! If it is called a Dress-up of the circumference of the Engine up, it will be this too! It was as could exchange easily and having also considered luster and color!
A price is also handy and is a reliable Brand! If it is called a Dress-up of the circumference of the
Engine up, it will be this too!
It was as could exchange easily and having also considered luster and color!
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
When decomposing the bottom of the waist, it is exchange about the O ring of a generator part. Since it was cheaper than purchasing brand-name parts individually, this goods are purchased. Since it was contained in the Set although the S
When decomposing the bottom of the waist, it is
exchange about the O ring of a generator part.
Since it was cheaper than purchasing
brand-name parts individually, this
goods are purchased.
Since it was contained in the
Set although the Screw was unnecessary, it exchanged in passing, but the
Screw is excluded, and it is perfect if still cheaper.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub]., HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA jazz, HONDA magna fifty, HONDA monkey, HONDA CUB [Cub].
Since construction material is a Stainless although rust occurs immediately with heat, isn't an authentic positive one OK? If it exchanges before breaking, I will think that it is good.
Since construction material is a Stainless although rust occurs immediately with heat, isn't an authentic positive one OK? If it exchanges before breaking, I will think that it is good. View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
It purchased to the Maintenances of the MONKEY which passed for 15 years. Since it does not exchange frequently, two pieces are unnecessary, but I think that what is necessary is just to have one piece as a reserve since it is not expensive. a
It purchased to the Maintenances of the MONKEY which passed for 15 years.
Since it does not exchange frequently, two pieces are unnecessary, but I think that what is necessary is just to have one piece as a reserve since it is not expensive.
although
exchange was comparatively easy, an instruction manual is natural one which is and explains the exchange method in as by entering a figure -- if it attaches, I will think that it is better.
I investigated many things in a Net.
I think that exchanging before becoming serious oil leakage is safe as for such portions of an old car body.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
[Webike Monitor] Since POSH is taking out such same parts as pure, it is saved in the emergency. The thing itself can be used satisfactorily. It is cheap, and since it changes easily, it is found useful.
[Webike Monitor] Since
POSH is taking out such same parts as pure, it is saved in the
emergency.
The
thing itself can be used satisfactorily.
It is cheap, and since it changes easily, it is found useful.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Ape 50, HONDA XR50 Motard, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Ape 50, HONDA XR50 Motard
It purchased to the Maintenances of the MONKEY which passed for 15 years. Although the Oil seal of the Shift-arm part was exchanged for the first time, the method of removing an old Oil seal was not found well, but troubles were suffered dramat
It purchased to the Maintenances of the MONKEY which passed for 15 years.
Although the Oil seal of the Shift-arm part was exchanged for the first time, the method of removing an old Oil seal was not found well, but troubles were suffered dramatically.
the
instruction manual is natural one which is, and explains the exchange method in as by entering a figure -- if it attaches, I will think that it is better.
We recommend you for the direction where it will be exchanged from now on to work, after often investigating how to remove in a Net etc. in advance.
I think that exchanging before becoming serious oil leakage is safe as for such portions of an old car body.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA Ape 50, HONDA XR50 Motard, HONDA Ape 100, HONDA XR100 Motard
It purchased to the Maintenances of the MONKEY which passed for 15 years. Since it does not exchange frequently, two pieces are unnecessary, but I think that what is necessary is just to have one piece as a reserve since it is not expensive. a
It purchased to the Maintenances of the MONKEY which passed for 15 years.
Since it does not exchange frequently, two pieces are unnecessary, but I think that what is necessary is just to have one piece as a reserve since it is not expensive.
although
exchange was comparatively easy, an instruction manual is natural one which is and explains the exchange method in as by entering a figure -- if it attaches, I will think that it is better.
I investigated many things in a Net.
I think that exchanging before becoming serious oil leakage is safe as for such portions of an old car body.
View detail
Fits: YAMAHA TZR50, YAMAHA TZM50, HONDA Ape 50, HONDA Ape 100, YAMAHA TZR50, YAMAHA RZ50, KAWASAKI KSR-2, KAWASAKI KSR-1, HONDA NSR80, HONDA NSR50, HONDA NS50F, HONDA NS-1, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA Ape 50, HONDA Ape 100, YAMAHA TZR50, YAMAHA RZ50, KAWASAKI KSR-2, KAWASAKI KSR-1
In order to run a [Webike-monitor] circuit, this cap that can do a wire lock was purchased. The person who does not run a circuit is also the highest also at an appearance tune. The color is said and carried out!
In order to run a [Webike-monitor] circuit, this cap that can do a wire lock was purchased.
The person who does not run a circuit is also the highest also at an appearance tune.
The color is said and carried out!
View detail
Big relief can be got by changing in detail in the case of an oil change. It is enough if you can buy relief for only 210 yen. The goods themselves are thick and it can bind it tight firmly. When I do price ply to mailing cost no charge, I pur
Big relief can be got by changing in detail in the case of an oil change.
It is enough if you can buy relief for only 210 yen.
The goods themselves are thick and it can bind it tight firmly.
When I do price ply to mailing cost no charge, I purchase.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
Although about one year passes using this product, after exchanging, there is no oil leakage once until now. I think that they are goods which can be used in comfort.
Although about one year passes using this product, after exchanging, there is no oil leakage once until now.
I think that they are goods which can be used in comfort.
View detail