Reviews
BLACK ON SILVER
I changed the Cap bolt holder of License Plate from Gold to Black.
The attached vehicle is Ninja H2.
Until now, I used Gold, but I chose to remake Black Balance with body color Miller coatBlack, I chose Black.
Although it is a private impression, the effect is as expected! Large Correct!
Silver of Cap bolt and Black of Holder matched, it became a good contrast Contrast, the Balance of the whole body was further improved.
Small Sana Parts, but the fine Balance stacking is Large off to Custom.
View detail
Unexpectedly large effect PetitCustom
I made PetitCustom with CF POSH Cap bolt holder.
The material of the product Body is Duralumin, and the color is beautifully decorated with Anodized Treatment.
Color is from Balance with car body color, Choice Black. Design is also simple, I like it very much!
Since the License Plate was previously installed with Cap bolt, we diverted it and replaced the Washer and Cap bolt holder.
Casual PetitCustom, but the effect is more than expected!
Duralumin is a type of Aluminum Gold, such as Aluminum and Copper, Magnesium etc., the proportion of Gold other than Aluminum is copper : About 4%, Magnesium : 0. 5%, Manganese 0. It's 5%.
Then, the applied Anodized Treatment is extremely convenient, electrolyzes dilute sulfuric acid, oxalic acid, etc. as a treatment bath and Aluminum as an anode, electrochemically oxidizes the surface, and forms a film of aluminum oxide By the method, it is resistant to corrosion and it becomes a hard surface, so it becomes high wear resistance.
In addition, coloring (It is not painting) It has the feature that it can be done. There are countless holes in the film made with Anodized Treatment, and if it is impregnated with dye, it can color while keeping the gloss of Gold genus. This is not able to do with any Gold genus, it is a special skill that only Aluminum can do.
* Plating's is not Anodized.
CF POSH Cap bolt holder has various colors, so do not you enjoy PetitCustom of your favorite color with your favorite color?
View detail
The contact area of a cap bolt is small. When attaching a part to a plastic and resin products, a thin metal, if the contact area of a bolt is small, it could cause a crack or modification. If a holder is applied to a cap bolt, a bigger contact area than
The contact area of a cap bolt is small. When attaching a part to a plastic and resin products, a thin metal, if the contact area of a bolt is small, it could cause a crack or modification. If a holder is applied to a cap bolt, a bigger contact area than a flange bolt is gained. Furthermore, dressing up can also be attained. It could be better dressing effect compared with NASA type. Since an outside diameter is a little large, this is optimal to attach moderately or to attach to a narrow place. View detail
It was used for the stopgap portion of the Bolt hole after the Cap bolt currently used for the Rear-suspension attachment lower part, and Chain-case withdrawal.It is the best for the Dress-up up at the time of Cap-bolt use.
It was used for the stopgap portion of the Bolt hole after the Cap bolt currently used for the Rear-suspension attachment lower part, and Chain-case withdrawal.It is the best for the Dress-up up at the time of Cap-bolt use. View detail
[Webike Monitor] The Gold was purchased. Since it only puts into the Cap bolt, it can attach easily. And yet, I think that the Dress-up effect up is high! Cautions are required when uniting with other Manufacturers, since it is , howeve
[Webike Monitor] The
Gold was purchased.
Since it only puts into the
Cap bolt, it can attach easily.
And yet, I think that the Dress-up effect up is high! Cautions are required when uniting with other Manufacturers, since it is
, however a Gold of a deep eye.
View detail
Although it was a stationary portion of the radiator, M6 pure cap bolt was changed into the stainless, and the holder of aluminum was combined. Although it is fine parts, it is custom interesting at CHIKKU. Color chose silver. It became the li
Although it was a stationary portion of the radiator, M6 pure cap bolt was changed into the stainless, and the holder of aluminum was combined.
Although it is fine parts, it is custom interesting at CHIKKU.
Color chose silver.
It became the little dress-up ? up ^^
View detail
It uses for fixation of a radiator cover in combination with the bolt of SUS. Silver was chosen. w which using such parts well considers to be important point kana freely by Kami who advances KASUTAMU although it is small parts
It uses for fixation of a radiator cover in combination with the bolt of SUS.
Silver was chosen.
w which using such parts well considers to be important point kana freely by Kami who advances KASUTAMU although it is small parts
View detail
The effect of wearing is large although it is very small custom parts! Since especially texture carries out UP considerably, even other parts look good. (Smile) A size has an object for 6-mm cap bolts, an object for 8 mm, and an object for 10 mm with
The effect of wearing is large although it is very small custom parts! Since especially texture carries out UP considerably, even other parts look good.
(Smile) A size has an object for 6-mm cap bolts, an object for 8 mm, and an object for 10 mm with the size of a bolt.
Although there is also a several colors color, in its own car Z1000, it coordinates with a mounting part, and is using many Black and silver.
However, it will be URESHII, if there is economical pack since many are used very well (smile)!
View detail
Although at least this one impression changes, it is expensive. It is high in 1000 yen or more at two. If cheap to a slight degree, it can attach to more nearly various places. If it attaches and sees since it is a satisfying thing except a pr
Although at least this one impression changes, it is expensive.
It is high in 1000 yen or more at two.
If cheap to a slight degree, it can attach to more nearly various places.
If it attaches and sees since it is a satisfying thing except a price, I will think that it is good.
View detail