Reviews
Inexpensive and functional!
Nut is anti-loosening Type, which is good for Number. View detail
Reticulated and luxurious
It functions well as a reflective tape.
It may be a little difficult to apply to curved surfaces.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Good for Normal tank cap
I bought it to use for a tank cap for my Accosat, but after receiving it, I realized that the Bolt shape was different and never used it.
It can be used to change the bolt on a normal tank cap, so I think it is an easy way to dress-up the cap!
Purchased for ZrX1200R.
Bolt size is the same, so I think it can be pontooned.
View detail
perfectly (suited)
Perfect for your local Number!
The number is small, so it is not likely to be bent even if it was there much.
It is safe.
I'm putting up the Seal of the Shrine Amulet.
View detail
To one point!
I put it on because I wanted a change in appearance. View detail
No obligation.
Since the seal is voluntarily attached by Manufacturer to moped models, there is no problem even if it is not attached.
However, I have encountered a few times where the driver has mistakenly parked the car in front of me and thought it was one of a kind, only to see the License Plate and realize that it was a misunderstanding.
This is especially true for CUBs, which all look the same at a glance.
The Rear is not a problem because the color of the License Plate is self-explanatory, so we only used for Front Fender.
To be honest, I am not sure how effective it would be on a white Fender, but it is a good luck charm just in case.
Furthermore, it is a Seal, so durability is not an issue.
It is not at all necessary for some types of cars.
View detail
with Reflector
Purchased because of the Fender Eliminator.
The Reflector is convenient because it can be installed along with the Number, since it would be poorly maintained without the Reflector.
The product itself is thick and sturdy, so it is unlikely to be bent only at the reflector attachment point when it is caught on the cover.
I think the price is a little high, but the color is good and the rigidity seems high, so it is not bad.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank cap bolt
Low price and good looking. Easy to install. View detail
Casual Accent but satisfying!
Balance of price and texture is good.
I wanted to match the color of the car body, so I am satisfied.
View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100
DriveSprocket Replacement
This is a replacement for Gasket that I had purchased some time ago to replace it with a new one for DriveSprocket replacement.
The price seems to be much higher than the HondaOEM Product, and since there seems to be no price difference between the HondaOEM Product and the HondaOEM Product, I wonder if the HondaOEM Product is acceptable next time.
View detail
Stainless SteelBlack
Exhaust System Fixing Screws Material:When changing to Stainless Steel Black, the Nut was also changed to Flange Material.:We changed to Stainless SteelBlack. It looks good, is unobtrusive, and rust-resistant Stainless Steel. View detail
Stainless Steel
The nut used for fixing the exhaust system was changed to stainless steel to prevent rusting.
It looks beautiful and the fixation is nice.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
I'd have to look closely to see it.
It is solid and looks good.
The problem is that the color is so light that I feel that if you don't look closely, you won't be able to tell that it has been changed.
Self-satisfaction.
View detail
m8Bolt to Fashion.
The m8Bolt is Fashion. The price is low, and the luxury is good. View detail
Stainless black
We replaced it with Stainless Steel for rust resistance and Black for good looks.
The product is good, but the price is a little high. I would appreciate it if it were cheaper.
We would like to replace the bolt as well, but there is no size available, so only the lock nut was replaced this time.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
CUB of Overhaul, incidentally.
CUB I bought this while I was at Overhaul of The price is cheap and stylish. View detail
Looking for something similar but can't find it?
It is rather expensive,
Plating of iron instead of Stainless Steel
Cap Nut in Flange without Serrete
Hexagonal section is long
I have not been able to find anything at tool dealers or other places that meets the requirements of the above.
I'm sure I can get them more inexpensively, but it's already too dull to look for them.
It is just right for use on the Exhaust stud bolt of the Exhaust System, where you want to avoid troublemakers and such when removing and installing.
There are no concerns about the quality of the plating, and no particular peeling or rusting appears even after long-term use.
View detail
Ideal for crime prevention.
This is no longer an exquisite product.
The combination of anti-tinkering Torx bolt and anti-loosening Nut is kind.
The design is simple and the color line nap is abundant.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
High Class Accent!
These Posh 24K bolts are small bits of quiet elegance, like fine jewelry. I am very impressed by the presentation! The price is a bargain! My Web!ke Japan feedback is 100% for product quality, speed of order processing and shipment. Keep up the great work friends! View detail
It has a sense of luxury.
Installed on PCX160.
It is quite luxurious.
Reflector is also satisfactory with good design.
View detail