Reviews
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Good for Normal tank cap
I bought it to use for a tank cap for my Accosat, but after receiving it, I realized that the Bolt shape was different and never used it.
It can be used to change the bolt on a normal tank cap, so I think it is an easy way to dress-up the cap!
Purchased for ZrX1200R.
Bolt size is the same, so I think it can be pontooned.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
I'd have to look closely to see it.
It is solid and looks good.
The problem is that the color is so light that I feel that if you don't look closely, you won't be able to tell that it has been changed.
Self-satisfaction.
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
CUB of Overhaul, incidentally.
CUB I bought this while I was at Overhaul of The price is cheap and stylish. View detail
Looking for something similar but can't find it?
It is rather expensive,
Plating of iron instead of Stainless Steel
Cap Nut in Flange without Serrete
Hexagonal section is long
I have not been able to find anything at tool dealers or other places that meets the requirements of the above.
I'm sure I can get them more inexpensively, but it's already too dull to look for them.
It is just right for use on the Exhaust stud bolt of the Exhaust System, where you want to avoid troublemakers and such when removing and installing.
There are no concerns about the quality of the plating, and no particular peeling or rusting appears even after long-term use.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank Cap CoverBolt
24GoldPlating is a lighter gold color than Anodized Gold.
The appearance is completely different.
View detail
Gorgeous because of its color!
We replaced it incidentally when adding a Hook around the License Plate area.
The Torque bolt has a flat plate screw head, low volume, and a thin aluminum tray for a clean look. The aluminum tray is also thinner and looks more stylish, whereas a normal bolt looks rugged.
You will need a T30 Torque to install it, but it is not included with the product. It would be a waste to buy it just to install this, so we recommend checking to see if T30 is available beforehand.
View detail
Quality as good as the price
There are similar products with lower prices, but I am satisfied with POSH products because of their higher quality. View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FZ1 Feather
Although it will be Accent.
I bought it thinking that the gold color would look good on my dark blue motorcycle.
The quality as Screw is perfectly fine. (The price is reasonable.) I thought it would have been better if the color had been darker. I would not have noticed it if I had not been told.
View detail
Fits: YAMAHA MT-09, YAMAHA MT-09 Tracer, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA MT-07, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FAZER, YAMAHA MT-07, YAMAHA FZS1000 Feather, YAMAHA FJR1300, YAMAHA FZ1, YAMAHA FAZER
Friendly, practical and decorative
[How is it used?
Approx. 6 years, 67,000 km
The system is used around ambient temperatures in the Tokyo area and is installed in spring, summer, fall, and winter.
Some heat due to Circuit running.
Was the one you received as per Image?
As shown in the product image and description, the only visible part is the bolt of Blue Stainless Steel, as shown in the Image.
Was the installation difficult?
Only a 4mm Hexagonal Wrench is required for replacement, and the mounting is easy and simple with a fuel tank spec.
However, if the two different lengths of Bolt are installed without thinking about or checking the locations where they will be used, the Bolt will fail to break or perforate as shown in the attached image.
Tanks vary from vehicle to vehicle, but if the tank cap is broken, the assembly (39P-24602-00) will be replaced at a cost of 12,980 yen at the time of writing (April 30, 2023) and the key will be changed.
How was your experience with it?
The performance of the bolt as a decorative bolt was used with a 4mm Hexagonal Bit of TONE and a Ratchet of KTC, but although it is unclear whether it was peeled off at the time of installation or due to age, the silver-colored surface is exposed in some areas due to the peeling of the coating.
Performance as Mounting Bolt is fine.
[Included Parts:were they on?
nothing special
[Kindness. Hence, possibility of flow from this product to another product].
The length of the Bolt and the Size of the Bolt are specified,
of the same Size without having to remove the Bolt from the vehicle and measure the length.
Aluminum, Stainless Steel in different colors, and Titaniumium Bolt for attaching
It will be a purchase Memo. I have a feeling.
[Was there anything that disappointed you?
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
For protection of Number and prevention of mud splashes.
The expected effect was to prevent mud splashes during Fender EliminatorSpec.
This part is installed in such a way that it opens outward from the back, so that the smallest possible area can be used to achieve the largest possible effect. The impression was very natural! When I checked the reverse side of the car after driving, I found that the mud splashes were properly controlled, and there were no splatter marks on the surface of the number.
Nutty Off forest roads and rough weather, even OEMFender can't prevent bounce-offs, just as we expected.
It is not bad, but it is heavy because it is steel and I wonder if it is my installation problem. I have noticed a chattering sound similar to that of the Off car's Under Guard at certain RPMs when the car is first warmed up.
That said, there are no other parts of this type that can be found anywhere else, making it a rare and precious commodity, and it is also extremely easy and simple to install, making it an easy and highly recommended part.
View detail
Cosy! Versatile!
It was used for the Plastic portion of the BIKE.
I think it's cosmetic enough for a DIY project!
View detail
Fits: HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA monkey
I feel like Engine tuning!
[How is it used?
Normal city driving
Was the one you received as per Image?
Yes
Was the installation difficult?
Installation is easy since it is a replacement for the NORMAL, but it must be tightened with the specified Torque.
Tightening is easier to apply Torque because it is Longer than NORMAL.
How was your experience with it?
It looks Tune.
[Included Parts:were they on?
None
[Was there anything that disappointed you?
Not particularly
View detail
If only it were a little cheaper.
Screw, there's no Drill when you start playing Washer or something.
I figured it could be a little cheaper, but I'm happy with the product itself!
View detail
Conforms to vehicle inspection
It is a reflector that is necessary for the vehicle inspection of the clear tail. It is easy to use with Tape. View detail
In the Accent of License plate
One point Accent on the license plate has a dress-up effect and prevents theft. The Anodized Color is painted beautifully. View detail
Mounted on PCX160
I used this for the Bolt on Exhaust Guard on my PCX160.
The quality is fine and the Anodized color is good.
The cost performance is not so good, but it is a product that can dress-up easily.
I use it with Cap Bolt Cover, but I want the height of Holder to be a little higher because it sticks out when I put Cover on it.
View detail
It's only a License Plate Bolt.
I've been thinking for a while that Bolt fixing the Number was Parenthesis bad It's steel, so if it rusts it's the worst. However, I had never thought about replacing it before, but this time the grommets Once I got hooked on Custom and started obsessing about it, even this one started to bother me.
So, I knew there were a lot of people out there thinking the same thing! There are Parts that properly cater to those feelings. We-Big had a variety of DesignBolts for license plates. They have some weird Mark's bolts, but they have a beautiful anodized color. The stainless steel cap bolt and stainless steel lock nut are used to stop it. I thought this product was very good, and it comes in several different colors. If you're cool with it, you can't say it's expensive for just this, but, well, these parts are. I think we should be thankful that we are prepared in advance.
I'm Grom Dress- in BlackRedGold Germany Flag Concept Since we're moving up, the obvious choice is Gold, because Anodized Finishing's The shape and texture of the color are good. As far as fitting into Plate...well, there's no way around it!
It's easy to install, of course, and it's prepared for Number, so it's easy to adjust the length of the bolts and so on. It's a perfect fit. Now look at the pictures. Does it have a presence? No? This is also an expression of love for your car, after all. It's not about what other people see, it's about creating your own personal vehicle, not just here and there, but also here and there. I think it's the joy and pleasure of creating.
View detail
Red fades
I think it's nice and simple to look at, and since it's Torque, it's also petit security!
I don't think I'd recommend red because it's getting more and more faded
Black or something like that would be good
View detail
Quality is good.
Quality is good, but it is expensive.
It is easy to purchase if you make it cheaper.
As a use place, I use it instead of Bolt's Washer fixing Plastic parts etc..
It is a good feeling that the contact surface increases, and when I tighten Bolt it does not bite me, I am saved.
View detail
A little point
Dress-up around Number for the first time.
It is surprisingly inconspicuous, but it became a little fashion.
Although the value does not extend, but it is not noticeable, COSPA may be a little bad ....
View detail