Reviews
Reticulated and luxurious
It functions well as a reflective tape.
It may be a little difficult to apply to curved surfaces.
View detail
with Reflector
Purchased because of the Fender Eliminator.
The Reflector is convenient because it can be installed along with the Number, since it would be poorly maintained without the Reflector.
The product itself is thick and sturdy, so it is unlikely to be bent only at the reflector attachment point when it is caught on the cover.
I think the price is a little high, but the color is good and the rigidity seems high, so it is not bad.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank cap bolt
Low price and good looking. Easy to install. View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100
DriveSprocket Replacement
This is a replacement for Gasket that I had purchased some time ago to replace it with a new one for DriveSprocket replacement.
The price seems to be much higher than the HondaOEM Product, and since there seems to be no price difference between the HondaOEM Product and the HondaOEM Product, I wonder if the HondaOEM Product is acceptable next time.
View detail
Stainless SteelBlack
Exhaust System Fixing Screws Material:When changing to Stainless Steel Black, the Nut was also changed to Flange Material.:We changed to Stainless SteelBlack. It looks good, is unobtrusive, and rust-resistant Stainless Steel. View detail
Stainless Steel
The nut used for fixing the exhaust system was changed to stainless steel to prevent rusting.
It looks beautiful and the fixation is nice.
View detail
Stainless black
We replaced it with Stainless Steel for rust resistance and Black for good looks.
The product is good, but the price is a little high. I would appreciate it if it were cheaper.
We would like to replace the bolt as well, but there is no size available, so only the lock nut was replaced this time.
View detail
Stainless black
The Flat Washer is also stainless black along with the Fixing Screw in stainless black.
It looks nice, but this price for two pieces is ….
I wish it was cheaper.
View detail
For vehicles registered as Class 2.
I installed this on my class 2 registered VINODELUXE and I think it is a must have for a class 2 registered moped. I am glad that the Triangle Mark Sticker is included so I didn't have to buy a new one.
The finish on the corners of the Holder is not good. I was also concerned about the weight of the Holder itself, but it might be good for durability.
View detail
pleasant to look at
This time, I put this Holder in place of a Washer for the M10 Cap Bolt for the Exhaust System.
It is definitely better looking than the tasteless Washer. It also applies a good amount of surface pressure. I chose Silver, but there are many colors to choose from.
View detail
alignment
The Rear Sets are replaced together with Bolt for alignment.
It would be nice to be able to choose Size, etc., but I wish the price was lower.
View detail
Looks good, but has BALI, so be careful when working with it.
The size and thickness of the plate was just right. It seems to be strong enough that there is no bending by vibration. I think that it is good because I can secure appropriate visibility by turning it inside out and attaching it according to the type of car because it is angled against the License Plate attachment surface.
What I was interested in was the BALI on all corners of one side. Although it was painted, the aluminum of the base was visible because of the BALI. In some cases, I thought that I might cut my hand. When I installed it, I shaved off the BALI and repainted it.
The finish is a bit poor for the price. It's a shame because the machining itself is well dimensioned...
View detail
I used it to increase the height of the Handlebar.
Although this spacer is aluminum, there is a high-grade feeling because it is nickel plated. I was looking for a spacer with a good finish and shape because the mounting position is a noticeable point. View detail
At One point.
Since I also use Blue color Aluminum parts, I purchase it. There is nothing especially because it is attached to other vehicles.
It's relatively inexpensive so you may change the color with your mood.
View detail
Can it be stopped even if it is not a violation?
I bought it with Webike before and pasted only Rea's triangle, but if I tried to paste it "Even if it does not violate it can be stopped" I heard that story, so I decided to paste it. View detail
Since the Bolt which had reached had rusted, it decided on exchange. since finishing was good and the attached Nut was a Self-lock Type, it drops out during a run -- it is reliable.
Since the Bolt which had reached had rusted, it decided on exchange.
since
finishing was good and the attached Nut was a Self-lock Type, it drops out during a run -- it is reliable.
View detail
He plans to attach to a his original work fender, and it purchased. This 800091 is only a triangular sticker. A person [ want / the mark on the fan of a front ] needs to place an order for 800090. Since the stock which was in the store by chan
He plans to attach to a his original work fender, and it purchased.
This 800091 is only a triangular sticker.
A person [ want / the mark on the fan of a front ] needs to place an order for 800090.
Since the stock which was in the store by chance was a posh thing, this was bought, but I think that what is necessary is just to choose out of a favorite manufacturer since nothing a manufacturer's can be regarded as it being about a difference.
Although it is not indispensable on a regulation, since motorized I kind and the misunderstood police motorcycle will follow if it has not attached, I consider that it is better to be.
View detail
Since there was no triangular sticker of RIA, it purchases. It is better to stretch, after cleaning the place to stretch, since adhesive power is somewhat weak although attached firmly.
Since there was no triangular sticker of RIA, it purchases.
It is better to stretch, after cleaning the place to stretch, since adhesive power is somewhat weak although attached firmly.
View detail
Since almost all stickers had become a set, it was good. If it sticks after cleaning the place to stick, it can stick finely.
Since almost all stickers had become a set, it was good.
If it sticks after cleaning the place to stick, it can stick finely.
View detail
Fits: HONDA NSR50, HONDA NSR80, HONDA NSR50, HONDA NSR80
A use upper cowl is fixable to 88`NSR80 firmly. Since it was us and red TERAKARA, an attached aluminum collar did not have a problem with a red anodized, but the place which has neither silver nor a safe color of Black is the only minus point.
A use upper cowl is fixable to 88`NSR80 firmly.
Since it was us and red TERAKARA, an attached aluminum collar did not have a problem with a red anodized, but the place which has neither silver nor a safe color of Black is the only minus point.
View detail