Reviews
Mirror Holder is no longer available.
[How is it used?
I bought a used WR250R before the price went up as much as it has now, and it had a ZETA Pivot Clutch Perch CP installed at first, but the Mirror was only installed on the Right Side, so I had to replace it with a ZETA Pivot Clutch Perch CP. Is it legal to use a LargeMirror without LeftMirror, or is it scary when changing lanes?" I looked closely around the clutch and found that the ZETA clutch holder does not have a screw hole for mounting Mirror!
The OEM clutch holder of the WR250R has an integrated Mirror Holder, so when it was replaced with a ZETA one, the Left Mirror could no longer be installed.
I ordered this product as soon as possible to avoid danger, as my driving skills and ability to perceive danger are not very good.
Did you receive the item as per the Image?
I ordered the product after thoroughly checking Webike's product description section, and it was exactly as I had imagined it to be.
Was it difficult to install?
BoltQuantity this product to the space in the root river of the Clutch holder attached to the Handlebar.:It is a simple job to attach with 2pcs.
Quantity:Pair (for Left and Right) If the Mirror mounting spacing of the two mirrors can be installed at the same location, there will be less discomfort when the Motorcycle is viewed from the front.
How did you like it?
Once firmly installed, the Mirror Holder is a normal Mirror Holder without any Mirror gaps while driving.
When I purchased it from Webike, it was on sale at Timing, so I was able to purchase it at a lower price than OEM holders for other vehicles.
Was "Included Parts:" attached?
BoltQuantity for HolderBody and mounting:2pcs are included in the package.
Were there any disappointments?
I purchased a Blue alumite product and it faded faster than other Anodized dyed products.
I am thinking of painting it matte black with a cheap can of Spray if the color fades any further.
Other items that would be helpful
Point and hang of installation
As I mentioned above, I think it would be less uncomfortable when viewed from the front in Symmetry if the Holder is mounted at the same spacing as the Mirror position on the Brake Side.
[Availability and clarity of the Instruction Manual
I don't think there was an Instruction Manual...sorry my memory is a bit hazy as I purchased it quite a while ago.
[Notes]
There is nothing special in terms of functionality, but Blue alumite fades quickly, so I think it would be safer to purchase Black.
[ITEMS TO BUY TOGETHER
This is an opportunity to use your favorite MirrorQuantity:Pair (for Left and Right) I wonder if it would be customary to purchase a "Custom"?
[Opinions and requests to Manufacturer
The color fades quickly, so I would like you to take measures to prevent this, and I would like you to continue selling this product for as long as possible.
View detail
Buy with brake lever set change
The finish looks good and I'm satisfied with the design I want Recommended as a mirror hole replacement when changing the genuine front brake set View detail
Thin.
I bought this because I changed the Clutch lever and no longer have the Mirror hole.
It is good because it is thin and one step higher, so it can be placed anywhere.
View detail
It purchased, when carrying out inverse attachment of the ball joint mirror (square shape) attached to ZOOMER to the handle bottom. Since appearance also became smart and the inverse attachment was used as a sub mirror, the back check was completed ex
It purchased, when carrying out inverse attachment of the ball joint mirror (square shape) attached to ZOOMER to the handle bottom.
Since appearance also became smart and the inverse attachment was used as a sub mirror, the back check was completed exactly.
I think that they are convenient parts which can do various usage in the circumference of a handle according to a device.
View detail
Mount expansion base to fit in the gap
[How is it used?
Less than 5 years old, about 60,000 km.
Using Ram Mount's M10, Short arm, and Smartphone Mount, the Xperia5 and driveman BS-8 were used for touring and circuit.
It has been exposed to ultraviolet rays for quite a while, but I don't think the color has faded yet.
Was the one you received as per Image?
Simple, just like the picture.
Was the installation difficult?
BoltQuantity of M4:It is easy if you look at this product Single Body because it is complete with 2pc.
However, if you want to screw it into the gap, you will need to remove the surrounding Switch box and Holder, shift them, and then install it.
How was your experience with it?
I haven't put Mirror on it, which was the original intended use, but it hasn't cracked or faded yet.
When the bolts are tightened, there is no wobble, and the motorcycle body shakes when shaken.
Because the mounting bolt is M4 and small, the screw lock was made solidly with high strength, so there was no loosening, and the phone can be used comfortably as navigation.
[Included Parts:were they on?
Installation BoltQuantity:2pc is attached.
[Was there anything that disappointed you?
None in particular. Handlebar in general will have Large resistance.
I've been using it with something else that isn't Mirror, but I've never had it fall off.
If you want to use it as a base for a smartphone mount, the only one with a narrower width than this product is Narrow type by SYGN HOUSE, I think. However, considering the price, there is a difference of several times between this product and Ram Mount, and I think Narrow type has a strong protrusion in front and back, so you may need to use it differently depending on the position you want to install it.
Compared to the various bar mounts, I thought the Merit was a strong choice as long as there was only one thing you wanted to install, it would refrain from looking like a bar mount and it wouldn't get in the way of maintenance.
View detail
Any position you want.
You can put the Mirror where you want it. View detail
Using Universal
I used it to install the Steering Damper.
No Recommendation.
View detail
I wanted to install the MOTOGPSRADAR4.
I bought this to mount my MOTOGPSRADAR4 to the HandlebarCenter section.
I installed it while thinking about not disturbing the meter surroundings.
View detail
Useful universal attachment bracket
This is a nice bracket made from high quality aluminium. It is marketed as an auxiliary mirror attachment/bracket but it can really be used for anything that can be fixed to it with the correct sized bolt. I have used mine to attach a mobile phone holder to the handlebars. It also supplied with certain Post branded brackets. The clamp in for 1" tube and the hardware does not rust - I've had it on my handlebars for 3 years and about 25000 miles and the screws have not corroded at all. View detail
Casually...
What made you decide to buy?
The KOSO:Mini3Digital air-fuel ratio meter is installed in the Bore up GROM, and it's a good idea to use it casually and securely Parenthesis to install well!
How was your experience with it?
ΦFor 22.2mm Handlebar, unless you have a very good Handlebar I think that it can be installed in most Handlebar Also, since there are two kinds of Mirror mounting screw sizes, it is necessary to confirm when purchasing This time, in conjunction with the Active:Digital Monitor Compact Bracket I bought the M8/Pitch 1.25
Was the installation difficult?
It was a difficult place to work, so be careful not to damage the other parts I worked while Also, since the mounting bolt is M4Size, you need to be careful with the tightening torque ! The position of the body is in anticipation of future customization It is installed at the position in anticipation of future customization
【Please tell me the installation point and hang】
The mounting point is the same angle and position as the meter! I had to check several times to make sure that the Meter Bracket doesn't actually interfere with the other parts! Don't let me get mixed up with the other Meters again! I made the final form and tentatively assembled it and checked it several times
[Others]
The price is about $2,300 Cheap price! I don't think so, but since the manufacturing is done in Japan, I have no complaints about the quality and finish This time, I'm going to use the KOSO:Mini3Digital A/F ratio meter in a more casual way, and at the same time, I'm going to use it as a tool to help me get the most out of my car Parenthesis well prepared to install, but quite prepared to include Meter as well It took me a while, but this part is also pleased with the world of self-satisfaction
View detail
Cut-out is the best built-in.
XR100MOTARD 145cc It is installed in full Custom.
Mirror Holder is required, and when we searched on Wee Big's site, I decided on this product.
Because Mirror Holder is a part that should not stand out.
However, there is no difference from other Custom parts.
This product made the color Black, exquisite sense of cut-out feeling and exquisite, compatibility with other Parts is also the best.
The price is also reasonable and I think that it is the highest Rank in Mirror Holder.
Easy to install, no graffiti, you can firmly install.
If you are looking for Mirror Holder, this is a Recommendation item.
View detail
You can firmly fix it.
Mirror 's Screw acceptor has broken, so I replaced it with this item.
Mirror Holder has Type that receives Mirror right above Handlebar and Type before this product but I wanted to bring it close to OEM so I bought this product.
Amazonetc. I also thought of a no - brand item that I'm selling at, but I wanted to fix it soon I did not want to lose the money of buying goods so I bought this item and was right answer.
View detail
Used for installation of Digital meter on Handlebar
I bought it for installation of YOSHIMURA oil temperature Meter instead of for Mirror. Without products that are quite easy to handle, this product is clamped to the Handlebar and Meter is set. Meter comes in exactly good position and it is easy to use.
It is handy because it is also free to tilt to prevent reflection. it's recommended!
View detail
Steady making
It is a solid making.
It is the difference of cloudy mud with super cheap analog products sold at certain Oakonjo.
First, because it withstands the vibration of the vehicle, Mirror will not be blurred out.
View detail
Accuracy is good
Really good accuracy.
Certain ok etc. It is very different from similar super-discount items in.
Painting can not be peeled off by lightly hitting the tool.
However, it is expensive ....
It is luxury goods ...
View detail
To prepare for a running meeting
Circuit purchase to make it easy to remove Mirror when traveling.
- KawasakiOEMSwitch box,
- Gail SPEED MASTER
- FanaticLOW HANDLE
We attached this Mirror Holder with a combination of, but there is somewhat cramped.
- The Holder part is nice feeling with Tight, but because the Mirror attachment part is bulging, it partially interferes with the Switch Box, it can not be mounted closely enough.
- There is no problem with regard to rigidity, nor will the angle change due to vibration etc..
- The company Tank Bracket and Blue of the same color as DMV's AnodizedGrip, so there is unity of color and it is very good.
View detail
It is a YOSHIMURA to APE100. It is use Temp-meter attachment and for Carbon-meter-bracket fixation. although it will be settled shapelier and a leeway will be given also in between Brake levers, if the fixed portion is thin to a slight degree.
It is a YOSHIMURA to APE100. It is use Temp-meter attachment and for Carbon-meter-bracket fixation.
although it will be settled shapelier and a leeway will be given also in between Brake levers, if the
fixed portion is thin to a slight degree.
Safely, since use, appearance, and field-of-view nature are not bad to fixation, either, it is satisfied with it.
View detail
He bought it in order to attach to YZF-R125. Even if it calls it , it is not the purpose of use as a Mirror holder. It is for using as a its original work Step of a Side stands this time [ ]. The Motorcycle which had ridden until now [
He bought it in order to attach to YZF-R125.
Even if it calls it
, it is not the purpose of use as a Mirror holder.
It is for using as a its original work Step of a Side stands this time [
].
The Motorcycle which had ridden until now [
] had a Step in the Side stands fundamentally, while it had been the posture which rode, it was easy to take out a Side stands, but though it was regrettable, it was not in R125.
thinking, this should be able to use a Handlebar-related Parts! and making a Step on one's own using a Mirror holder, since it was around 22 mm when the outside diameter of the
Side stands was measured -- it happened to have thought.
A Motorcycle is in the place where such DIY(s) are made as Idi, and, also happily, there is.
All of Motorcycles cannot be enjoyed only by riding!!
View detail
[Webike Monitor] It was used in order to attach the Meter stay of a photograph this time [ ]. Although the brand name serves as a Mirror holder, there are likely to be more nearly various uses according to an Ideas.
[Webike Monitor] It was used in order to attach the Meter stay of a photograph this time [
].
Although the
brand name serves as a Mirror holder, there are likely to be more nearly various uses according to an Ideas.
View detail
I got attachment of an external tachometer and the pedestal of the digital water thermometer to let it use. A general thing can be attached if it is the thing which the standard practice of the screw suits. Since it was slimer than other clamps an
I got attachment of an external tachometer and the pedestal of the digital water thermometer to let it use.
A general thing can be attached if it is the thing which the standard practice of the screw suits.
Since it was slimer than other clamps and stay folders, it was able to use also for the severe location.
Since the price was also cheap, light and satisfied also with form or a size target, it was good shopping.
View detail