Reviews
Buy extra for free shipping
Purchased this for my NSR50 that I am currently Restore. I will not need it for a long time, but I bought it in advance to get free shipping. I will need it sooner or later and the cost is good, so no problem. View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
Not just looks, but functionality.
Made by Posh Cub Type/Mini Keg Grip is 。 I chose Black because Black is a safe color. 。
I chose it because it looks good on the CUB and because of the wide variety of colors available.
I want to change the Grip and make it my own. Various Design's are on the market.
However, the size of the handlebar is different for each car model, so if the size does not match, the Large size will change.
By the way, what is the size of the Handlebar Grip of the CUB?
* Dedicated to genuine handleGrip total length for HONDA CUBSeries vehicles:112mm 。 Grip I.D.:Quantity:Pair (for Left and Right) Co 24mm.
Grip replacement procedure
(1) Cut the old grip with Scissors First, you must remove the old grip to begin. 。 Various ways to remove Grip 。 There are various ways to remove it depending on the condition of the person and the motorcycle, such as cutting it vigorously with a cutter knife or injecting silicon spray and pulling it out as hard as you can. 。 This time, I didn't have a cutter on hand, and I was planning to dispose of the old grips, so I used a kitchen scissors to make the incision.
↓
(2) Remove the previous adhesive, etc. that adhered to the surface and clean it up.
↓
Next, we will install the new grips. 。 For this grips, it was easy to lubricate the new grips with silicon spray and push them into place. Generally, when installing new grips, it is often necessary to wet the handlebar with parts cleaner instead of lubricant before pushing the grips into the handlebar. 。 However, the dimensions of the grips are quite tight, so even if the silicon spray is used to fit the grips, the grips will not rotate after installation. 。
come
Effect after replacement
◎Grip's moderate elasticity is good.
◎ Grip is thick-walled and Barrel-shaped, making it easy to hold.
◎Less vibration on the hand than OEM. Less fatigue even over long distances.
◎The Fold is attached so it is not slippery.
◎The look of the car becomes old car feeling, and I like it (laugh)
Since the ▲Grip is Large, the Throttle opening degree is Large, so a little caution is required.
Personally, I like the comfort of the grip, and since the grip is a key element in motorcycle driving, I chose the barrel shape because it seemed like a good choice, mainly because it would reduce fatigue. 。 When we actually put it on, as expected, we found it easy to grip and the folds prevent it from slipping.
Barrel Type Grip is stylish in appearance. 。 For those CUB owners who are using worn-out Grips, we suggest replacing them, as they are quite inexpensive.
View detail
It looks very nice
As the product photo shown, the grip is very classic and comfortable. Its look is quite similer with Bitwell Kongfu grip. View detail
I choose Racing grip.
For many years, only the open end was available, but in recent years, only the short type is now available with a closed end to match the Scooter and other models.
I feel most comfortable with this racing grip.
In Circuit driving, it is very easy to operate and use from SmallEngine Displacement Volume to LargeEngine Displacement Volume.
I think it is not tiring and universal for both city driving and touring.
I guess the drawback is that the Design is a bit old-fashioned.
View detail
GSXR1000K8
I was not sure about TZ, but here it is.
It came with a Blue Cheezy Cow Grip that I didn't understand, so I returned it to OEM.
Parenthesis usually improved.
In the meantime, I would also like to do Wiring.
View detail
Cool Tread Pattern Grips for the Grom
About quality and texture: I am happy with the quality of these tread hand grips, they are made from a soft rubber and the design pattern is very cool. About the feeling of use: They are a comfortable hand grip due to the soft rubber and smooth surfaces, much nicer then the Honda hand grips. Products to buy together: A quick throttle tube would also be desirable to purchase along side these hand grips so you don't need to go through the trouble of trying to re-use the Honda one and you'll also end up with a better throttle response. Difficulty of installation: The process to install takes about three quaters of an hour, heating the old hand grips to assist with removal helped and I used a silastic to secure the hand grips in place. Not difficult to do. Cost performance and comparison with other products: Good costing as you are getting a comfortable hand grip with a unique tread pattern at quite a cheap price as compared to the hand grips available from brands like Avon. About shipping and packaging: The faster shipping options are too expensive for myself so I just have to wait for my part to arrive via sea freight. Webike kept me updated on the status of my order up to when it shipped. The parcel arrived within the expected date range and was well packaged with no chance of the part being damaged. Any concerns, cautions, or advice when purchasing: With so many hand grips available, confirm you measurements of the mounting diameter and required length before you start browsing the huge range at Webike. View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
Barrel-shaped after all
I like Barrel Style Grip and decided on this product.
I've read in various reviews that it gets sticky and the color shifts, but so far it's Large sturdy.
If you have a sticky feeling, maybe you have Damage on the Rubber with Parts cleaner or lubricant when you install it…
So I installed mine with water and Air.
If done vigorously, water alone is Large sturdy.
No glue is applied, but it fits well enough without spinning.
The texture is moist, not LusterLuster.
Above all, I like Design.
View detail
If in doubt, buy this one.
The slippery Rubber Material feels great. The rubber material is smooth and comfortable. The design and reliability of this product is unmistakable. View detail
A little long for the ZX-10R?
I bought this without thinking about it to put on my ZX-10R 2011 OEM Handlebar, but when I tried to install it... A little long. It was 122mm, then 120mm would be Exactly? It was 122mm. It was 122mm, but if it is 120mm, is it Exactly? (Lol) It's not impossible to put it on 122mm, but the grip end with volume and the quantity:Be warned, if you don't buy it in Set, it could look shabby! View detail
Changing the Grip changes the Image quite a bit.
I used it for the LITTLE CUB that I have at my wife's parents' house. I fixed it with Bond for Rubber just in case. The color is Brown, I matched with footpeg. The body of the car is Silver and Beige, so it was finished in a good feeling. View detail
A classic.
Fit and texture are perfect. View detail
My first BrownGrip.
I used Brown's Grip for the first time, but when I rode with the Black Mesh Gloves, I got black marks on them.
Next time, I'll be using Blackish Grip.
View detail
Good quality, as expected
The grip is soft and the edges are very smooth, the rubber is elastic but still hard enough. Rate product quality 5/5 stars. Hope the company continues to promote and improve the product better and better :) The soft grip and the edges are smooth, the rubber is good elastic but still has enough stiffness. Evaluate product quality 5/5 stars. Hope the company continues to promote and improve products better and better :) translated by Google Translator View detail
Fit feeling is good and Large satisfaction
In choosing Grip I'm focusing on two points.
? Design is Simple and what seems to be Fit in hand
? There is a wire groove for fixing the Grip
As a result of emphasis on the above points, I chose POSH's WorksGrip !!
The appearance is a simple thing as you want, and the Rubber near Grip Netsu is softened to Omake.
Although the way to grasp Grip is each person, I will grasp the thumb and index finger as the center,
Fit it wonderfully when you hold !!
In either case I would like to make a ZIP Grip of ZXR 400 as well.
View detail
Unique Grip
I was looking for a unique Grip. I found a colorful thing from Posh where I was in trouble because there was not a thing of Mini size pretty. The price was also so good, but Wae Big could buy it a little cheaply. View detail
Replacing with Small Type Switching
Simple and Classic making like purchase.
It is not so thick as it looks, it is very handy and it grips just fine.
It is good to make the Grip itself, Design is also very good match with own vehicle and it is a product that can satisfy Large change.
Small Type Swatched Handlebar made it even simpler and fashionable.
Because the diameter is larger than the standard type Grip, it is recommended for those with bigger hands.
Color variations are also abundant, so it is also recommended to choose a color that suits your style.
I bought a Lame smoke, but it does not make me feel awkward, very Parenthesis is good!
Especially recommended for those who like Classic style!
View detail
The coloring of the color is also well beautiful Grip
VINO (SA10J) The mounting. Purchase Pink according to Body color.
Axel side is about 5 mm longer, but no problem.
The feeling is Soft, absorbing the vibration during running well
It is hard to get tired. If this is OK for a long time OK!
The outside diameter is neither thick nor thin, just right.
For attachment, apply Grip bond to Handlebar side
Then, if you spray Parts cleaner on the Grip side
I will enter all the way. If Parts cleaner volatilizes
Bond will also dry thoroughly.
View detail
Purchase Black
Sure, choose Black
It is good for second time use
Cool design with Simple
Ease of grip is also good
Surface is smooth but does not slip
I think that it fits various Motorcycle
View detail
In Classic custom
The color, shape and comfort are generally satisfying.
Plating's End cap became a feeling of wiping off cheapness,
I think Cospa is good as well.
If I have a Grip heater like me, I think this is better than the barrel type.
View detail
Fits: HONDA little cub, HONDA SuperCUB [Super Cub]., HONDA little cub, HONDA SuperCUB [Super Cub].
CUB has to be dedicated so long!
CUB Handlebar, Quantity : Pair (for Left and Right) Because it is the same thickness Universal's Grip can not be installed. POSH 's Grip is Exclusive Design so it was possible to install without problems. Since Color was also a calm color, it was Exactly to chic CUB image. View detail