Reviews
Fits: HONDA NSR50, HONDA NSR80, HONDA NSR50mini
NSR50 under construction
I am building a NSR50 and wanted to use a new electrical system if possible, so I bought this one.:There is no 2pc. So this Quantity:The 2pcs had to be used as they are OEM. The BlueYellow wire was removed and installed with a soldering iron, so it was not easy to install with a single tap. However, there is no description of the aforementioned White and Yellow colored wires. I'm glad to know that new ones are available. View detail
Reticulated and luxurious
It functions well as a reflective tape.
It may be a little difficult to apply to curved surfaces.
View detail
Fits: HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR, HONDA CBX400F, HONDA CB400SF, HONDA CBR400F, HONDA CB400FOUR
Made by POSH for safety!
I always used KITACO but this was cheaper so I bought it.
Compared to KITACO, it is the same as KITACO Large and seems to work fine.
View detail
with Reflector
Purchased because of the Fender Eliminator.
The Reflector is convenient because it can be installed along with the Number, since it would be poorly maintained without the Reflector.
The product itself is thick and sturdy, so it is unlikely to be bent only at the reflector attachment point when it is caught on the cover.
I think the price is a little high, but the color is good and the rigidity seems high, so it is not bad.
View detail
Fits: KAWASAKI ZZR1400, KAWASAKI Z900RS CAFE, KAWASAKI Z900RS, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG, KAWASAKI ZZR1200, KAWASAKI ZRX1200DAEG
Tank cap bolt
Low price and good looking. Easy to install. View detail
Fits: HONDA XR50 MOTARD, HONDA XR100MOTARD, HONDA APE 50, HONDA APE 100
DriveSprocket Replacement
This is a replacement for Gasket that I had purchased some time ago to replace it with a new one for DriveSprocket replacement.
The price seems to be much higher than the HondaOEM Product, and since there seems to be no price difference between the HondaOEM Product and the HondaOEM Product, I wonder if the HondaOEM Product is acceptable next time.
View detail
Stainless SteelBlack
Exhaust System Fixing Screws Material:When changing to Stainless Steel Black, the Nut was also changed to Flange Material.:We changed to Stainless SteelBlack. It looks good, is unobtrusive, and rust-resistant Stainless Steel. View detail
Stainless Steel
The nut used for fixing the exhaust system was changed to stainless steel to prevent rusting.
It looks beautiful and the fixation is nice.
View detail
Stainless black
We replaced it with Stainless Steel for rust resistance and Black for good looks.
The product is good, but the price is a little high. I would appreciate it if it were cheaper.
We would like to replace the bolt as well, but there is no size available, so only the lock nut was replaced this time.
View detail
YZF-R1 is M14
I bought a Washer for M14 for my YZF-R1 (2018). Some people use it 3 times, but I am afraid so I replace it every time.
It is not very profitable to pay shipping charges and hundreds of yen for one order, so it is more economical to buy these kinds of items in bulk, about 5-10 pieces at a time.
View detail
Stainless black
The Flat Washer is also stainless black along with the Fixing Screw in stainless black.
It looks nice, but this price for two pieces is ….
I wish it was cheaper.
View detail
For vehicles registered as Class 2.
I installed this on my class 2 registered VINODELUXE and I think it is a must have for a class 2 registered moped. I am glad that the Triangle Mark Sticker is included so I didn't have to buy a new one.
The finish on the corners of the Holder is not good. I was also concerned about the weight of the Holder itself, but it might be good for durability.
View detail
The fine Size is selectable, which is appreciated.
I purchased this one because the Screw pile on my current Baffle had been crushed.
The construction is solid with aluminum cut-outs.
I measured the size and purchased it, but the baffle was a little too large, so I had to shave it down and install it.
No complaints about the sound deadening effect.
View detail
You don't have to have it, but it's still better to have it.
I have always wondered about this contact, but it is indispensable for Plug connections. In the past, it was attached to Plug as a matter of course, but recently it is not attached, and when I wanted to use it, I had to purchase it because I did not have it on hand. View detail
PoshRacing grip
Replaced the OEM Product that is on it now!
Very nice and easy to grip.
It looks different, so it's worth replacing!
It comes in a variety of colors, so you can match it with your Motorcycle!
View detail
For vehicle inspection.
It is good because it is inexpensive, and I think it is easy to process because it is made of aluminum. View detail
Finger-friendly
The grom is Black and I wanted to add color.
Lever grip so it was a simple Accent.
I was just worried that the tip of the lever might shred when I installed it, but I was able to install it successfully.
It was Point to apply a generous amount of detergent when installing.
View detail
Performance as a Baffle
Looks and finishes are good.
I've gone to the trouble of installing it.
There was almost no change in volume as Baffle.
View detail
Brace bar
Purchased for 6VGORILLA
Handlebar position, width, and position are perfect.
It is necessary to drill fixing holes for Switch box installation.
No sukill is required for installation.
The problem is that I couldn't put it on my GORILLA because the meter position was against the welded Brace bar, so I gave up.
View detail
Power Filter Replacement
Installed on Z125PRO
The DAYTONA Power Filter had various problems, so we installed a new Duct and installed this one!
I am satisfied that there is no more noise to worry about.
View detail