Reviews
Fits: HONDA GORILLA, HONDA MONKEY
Easy to adjust
Simply replace with Idle Screw. Easier to adjust! View detail
Anodized for fine-tuning of hand guard, rust-free
[How is it used?
We used it to fine-tune the CYCRA hand guard.
Yamaha cars are MASTER to avoid Hit because of Banjo on the outside.
Was the one you received as per Image?
It was just like the image.
Was the installation difficult?
There is no problem just to pinch it.
How was your experience with it?
Since the product is Anodized, we hope it will not deteriorate.
Normal aluminum colors tend to cut-out and rust.
[Included Parts:were they on?
Color only.
[Was there anything that disappointed you?
There is also a length Lineup, which is just right because it is Anodized, but
It's a bit expensive
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA CRM80, HONDA CRM80, HONDA CRM80, HONDA CRM80, HONDA CRM80, HONDA CRM80
CDI replacement
OEM CDI replaced with Super battle due to breakage. View detail
Good appearance.
It looks and feels more like an old car.
Parenthesis is better now.
View detail
Effective at high speeds where available
Purchased for driving 567 km on the highway within approximately 600 km one way in SEROW.
Since we entered the highway around 1:00 a.m. when the date was about to change, there were almost no regular cars and only Trucks and Highway Buses were left, so this product really came into its own and made driving very easy. It is very convenient on highways that are not crowded and have a constant speed.
As the sun rises and the number of general vehicles increases, Accelerator operation increases, so on the contrary, the frequency of use has decreased. The frequency of use has also decreased on busy public roads.
The Magic tape is wrapped tightly around the GRU to ensure a secure installation.
View detail
Installation in conjunction with RearFender cut
CROSS CUBFJ60 I installed this product because I lost the triangular mark due to the rear end cut of the Rear Fender of the "Rear Fender". View detail
PoshRacing grip
Replaced the OEM Product that is on it now!
Very nice and easy to grip.
It looks different, so it's worth replacing!
It comes in a variety of colors, so you can match it with your Motorcycle!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
For Grip heater installation
I bought this one because it is variously Large strange to divert OEMThrottle.
I am not sure about High Solo conversion.
View detail
Plug Identification
Installed on NGK Power cable.
It is convenient for a quick glance.
It was very tight against the cable, so I slid it on with SiliconeLubricant.
It may be a good idea to use pliers or other means to spread them out a bit.
View detail
For vehicle inspection.
It is good because it is inexpensive, and I think it is easy to process because it is made of aluminum. View detail
W might be better than OEM.
It's more massive than OEM!
I have replaced the Lens with Manufactured by CGC and highly recommend it.
View detail
Fits: HONDA SUPER CUB 110, HONDA CROSS CUB, HONDA SUPER CUB110, HONDA SUPER CUB110, HONDA CROSS CUB 110
Dramatic exchange to Smooth GyaChange
Installed on a 2016 CROSS CUBJA10 model.
After adjusting the clutch by myself, I found that the gear was too heavy to enter and I had to adjust it many times, but sometimes it became hard, so I bought Change rodSupport.
Although I have only been driving for one day after installing the Change rodSupport, frequent gear change operations in town driving are so nice that I feel as if I have never been in the car before.
The support was installed by loosening the 4 bolts on the main stand and lowering the stand to loosen and tighten the bolts in the DriverBox.
I think the effect of this Change rodSupport is immensely Large.
View detail
Special shape
It is sufficient as a PlateHolder.
I can put a triangular Mark on the moped type 2 where it sticks out.
View detail
Simple
The back of the number has been refreshed. View detail
Fits: YAMAHA TZM50, YAMAHA TZR50, YAMAHA RZ50, YAMAHA TZR50, YAMAHA TZR50
Effective.
Used in YSR80.
It is not listed in Webig's compatibility, but it is listed in the Manufacturer's compatibility list, so it can be used.
Since the Spring was a replacement for a worn-out Spring, I could feel the dramatic effect.
It feels good because the Clutch connects quickly.
View detail
Fits: HONDA SUPER CUB110, HONDA SUPER CUB 110, HONDA SUPER CUB110, HONDA CROSS CUB, HONDA CROSSCUB110
Very good feeling
It inhance supercub's gear shift feeling and stability a lot. Easy and quick installation. I super recommand this parts to every supercub110 riders. View detail
Finger-friendly
The grom is Black and I wanted to add color.
Lever grip so it was a simple Accent.
I was just worried that the tip of the lever might shred when I installed it, but I was able to install it successfully.
It was Point to apply a generous amount of detergent when installing.
View detail
Fits: KAWASAKI ZRX1200 Daeg, KAWASAKI ZRX1200 Daeg
Easy Exchange
I like the shape of the OEM Blinker, so I just replaced the inside.
Since Relay is behind Meter.
Screen off, Meter panel off, only.
It was easy
I'm happy with it
View detail
Wrapping around exhaust pipe
There was a concern about heat when converting to Atech-SPL, so it was installed in the OEM exhaust pipe.
Result 3. Quantity:I used it for 5pcs. It was easy to roll with good color and little fluff.
It is fully baked but still has a sweet aroma.
View detail
Custom standard
Custom standard.:If you are using Stainless Steel round flat or spring washers, you may want to change to these parts for a more stylish look. View detail