Reviews
Wrap-around is necessary
I often use Dustcloth when working. I often cut and use unwanted clothes that I had stored at home, but I often run out depending on the work I have to do. I used to work at RecycleShop. "Bagged rags." I purchased and used the following at an inexpensive price. In that case, there was a small piece of gold on the cloth and it scratched the tank.
This Manufacturer's product is Paper waste. If it is a roll of Type, you can immediately identify it as a new product and use it without error. If you use a rag, the color of the cloth is different, and if oil gets on it during work, it is difficult to distinguish the oil from the rag. It is also convenient to distinguish the color of a new cloth.
The thickness is about 1mm and there is no unusual odor. The sewing machine has a fine line to cut it. It does not have any flaws when I tried to use it. This can be used for disassembling Brake and Carburetor.
Used Dustcloth is diverted to Oil suction, so there is no waste. When storing slightly used materials, be careful to separate them properly or they may damage the next material depending on what has been wiped in the past.
At our work site, we do not place the rolled Dustcloth as it is, but hang it through the Center hole with a rod. We try to keep the new dustcloth from touching the floor.
View detail
Along with Handlebar replacement!
Replace the tight cable with a new handlebar,
This is perfect!
The texture is nice and satisfying!
View detail
Long fork and handlebar replacement!
Used for long fork conversion and handlebar replacement!
The texture is nice and LargeSatisfied!
View detail
brake pad
Any concerns, cautions, or advice when purchasing good product the quality was very good i will order from here again i recommend you all to try it i have installed it on my harley davidson. View detail
Not bad!
I bought this one because I wanted to match it with Mesh hose.
I don't know if it's a quick look, but I personally like it.
View detail
Air cleaner review!
Shipping was really fast, I'm not going to lie
I really like the delivery time!
The packaging was also neat.
Installation actually seems to be about 2 stars out of 5 stars.
The product is easy to install and the design is so pretty.
I recommend it to anyone who decorates with a classic!
It was a little more expensive than other places, but it was okay thanks to the design!
I recommend! -------------------------------------------------- -------- Delivery was really fast without lying I really like the delivery period! The packaging was also clean. In fact, the difficulty seems to be about two of the five stars. The product is easy to install and the design is so pretty Recommended for anyone decorating in classic! It was a little more expensive than anywhere else, but it was okay thanks to the design! I recommend it! Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SPORTSTERFamily
Good servics and have the right part that very rare item to find View detail
Cheap but useful
Anyway, the price is very low and Reasonable, but
It is an ordinary Valve.
If you are not particularly particular, this should be sufficient.
Brightness is also comparable to NORMAL.
View detail
su air cleaner
It's cheaper than buying in the US and shipping is fast thanks to DHL shipping. It appears to have arrived within 2 days of delivery. It has not been installed yet, but the packaging is good and the product looks good. I was happy to be able to purchase it on webike, although it is a product that I can't find anywhere I look. I will write well. View detail
Filter for peace of mind without feeling the flow
To be mounted to hug an external round Frame.
Is it too extravagant to ask for ingenuity in the shape?
View detail
It's thicker than I thought
I bought it to prevent the Number from cracking due to vibration on a single cylinder. It is thicker than I thought, so I installed it on the back of the License Plate Bracket, and if there is space, I think it would be the strongest if I put it between the Bracket and the Number. View detail
คุณภาพดี คุ้มเกินราคา View detail
Fits: HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON Shovel head, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily
Used in servicing Dyna coil
I bought this because the length of the high-tension cord became insufficient due to the layout change of IGCoil.
It's about 60cm long, so it's probably compatible with most Motorcycles, and will accommodate those who don't want to place the IGCoil near the Engine, and want to place it behind the carburetor.
High-Tension Cord (Plug Cord) If you are not familiar with maintenance, you may want to cut your bike to your desired length, then take it to a motorcycle shop and pay for the work to be done.
If you hit the IGCoil with a hammer, the coil will break in half and become useless.
Then it's better to pay a little Gold and get a reliable press-in.
If you forget to incorporate the Dust Boots before press fitting, you will have to start over (and the Crimp may not be reusable).
If you apply the wrong amount of pressure when fitting the Dust Boots, the Crimp may fall out (if it is pushed in properly, it will not come out).
IGCoil must be fixed in a vise or a jig to tap, otherwise it will be gapped.
When the work is finished, measure the resistance value to confirm that the value is as per the service manual.
If this value is not correct, it is assumed that there is a problem or inadequacy in the core wire processing or Crimp processing.
So, it is essential to measure the resistance before press-fitting and with no code.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON Cars with CVCarburetor, HARLEY-DAVIDSON for XL
Very Good.
This product is simple and nice. It fits well with my sportser (2004 XL1200C). It is also easy to install. Excellent in price and quality. View detail
How come the light bulbs in Grom go out so quickly?
I bought this bulb as a spare because my Blinker bulbs in Grom went out because of the vibration. I don't have to worry if it goes out any time. View detail
It was cheap
This is a great product. It's a good thing that installation is not a problem, and the broken bulb was fixed, but it's always good to know whether the gold mouthpiece is suitable for the Lamp series, so it would be nice if the type of gold mouthpiece could be mentioned as well. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON Cars with CVCarburetor, HARLEY-DAVIDSON for XL
good quality
It has very good quality and high gross surface but it is little bit difficult to install for the ppl who never did replace the air cleaner because there is no instruction of it. View detail
Fits: HARLEY-DAVIDSON Others, HARLEY-DAVIDSON Universal
Low price and good quality
100% compatible with Grimeca master cylinders. I checked the operation and everything is satisfactory. Paint finish is also a great product. View detail
Excellent for Cost performance
The price is cheap but it works without problems.
I do not know until durability tries out, but also to the running situation Quantity : Pair (for Left and Right) As it is to be done, I think that there is no problem as long as there is not much.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
it's the best
We are reworking to respond promptly.
I thought it would take more days to arrive.
I look forward to working with you.
View detail