Reviews
Fits: HARLEY-DAVIDSON Universal
Cost performance
Cost performance is Large and good. Thank you. View detail
Fits: HARLEY-DAVIDSON
Firm and tightly adhered
It's more solid than some of the cheaper ones that cost about $200, and it adheres well, so the Carburetor doesn't fall off while working.
The cheaper ones don't stick as well and the carburetor often came off while working. In addition to that, they were weak against heat and cracked after 6 months of use.
Then there's durability
I would like to Impression again.
View detail
คุณภาพดี คุ้มเกินราคา View detail
Fits: HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON Shovel head, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily
Used in servicing Dyna coil
I bought this because the length of the high-tension cord became insufficient due to the layout change of IGCoil.
It's about 60cm long, so it's probably compatible with most Motorcycles, and will accommodate those who don't want to place the IGCoil near the Engine, and want to place it behind the carburetor.
High-Tension Cord (Plug Cord) If you are not familiar with maintenance, you may want to cut your bike to your desired length, then take it to a motorcycle shop and pay for the work to be done.
If you hit the IGCoil with a hammer, the coil will break in half and become useless.
Then it's better to pay a little Gold and get a reliable press-in.
If you forget to incorporate the Dust Boots before press fitting, you will have to start over (and the Crimp may not be reusable).
If you apply the wrong amount of pressure when fitting the Dust Boots, the Crimp may fall out (if it is pushed in properly, it will not come out).
IGCoil must be fixed in a vise or a jig to tap, otherwise it will be gapped.
When the work is finished, measure the resistance value to confirm that the value is as per the service manual.
If this value is not correct, it is assumed that there is a problem or inadequacy in the core wire processing or Crimp processing.
So, it is essential to measure the resistance before press-fitting and with no code.
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON Cars with CVCarburetor, HARLEY-DAVIDSON for XL
Very Good.
This product is simple and nice. It fits well with my sportser (2004 XL1200C). It is also easy to install. Excellent in price and quality. View detail
Austere looking.
I like the look of it, and it doesn't contain any gold, so you can cut it with a pair of scissors. However, it is easy to unravel from the cut line, so if you don't cut it after wrapping Vinyl Tape around it, it will unravel soon. I think it's soft and easy to use. View detail
Caution
There is more than I expected in the carburetor, intake manifold, exhaust system gasket, etc., but the O-ring that attaches to the Knock Pin of the cylinder is not included.
Requires separate purchase.
View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Others
Setting
I opened the Float Chamber to replace the Slow Jet on the CVcarburetor, but the original O-ring was blistered and couldn't be reused, so I bought it in a hurry.
The shipping was also very cheap.
View detail
Just in case …!
I used it on my '06 XL883R. torqued OEM Derby/Inspection Cover Bolts, and I was worried that the bolts would not lick every time I changed the oil. It's not good for my mental health, so I replaced it with this product!
I recommend it because it's a good cosmetic and, most importantly, it takes you away from that Torque horror!
View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
High cost performance
There are various oil filters available, but I bought one because it was in stock and the price was low.
It would be better to have a Filter wrench, but with the intention of breaking the Filter that was attached to it. It was taken with Pliers and squeezed by hand with no problems.
When you take the filter, oil comes out at a good rate, so it is useful to have a saucer.
View detail
★Attaka★Filter
To be honest, I don't know the effect that you can feel, because it's a Scooter, and Tank is a poly-Tan so it's not a problem as long as you're careful about foreign objects when refueling, but the iron Tank You will notice the rusty appearance of the filter as it is clear When installing this filter, do not use fire! It can cause your motorcycle to become very hot View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON Cars with CVCarburetor, HARLEY-DAVIDSON for XL
good quality
It has very good quality and high gross surface but it is little bit difficult to install for the ppl who never did replace the air cleaner because there is no instruction of it. View detail
Same as OEM, etc
There was no change to feel the difference, but I thought it was the same as the OEM for better or worse The OEM was damaged by ageing, so I replaced it It is cheap and I recommend it View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Others
OEMCVcarburetor's for Repair!
I used it on my 2006 XL883R carburetor final. for Repair There are no problems with the shape of the car and there are no problems after installation Parts can be expensive and take a lot of time to deliver, but we can make these Repair products cheaper and faster It helps that it's so fast! View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
Not available
I used paper-type ones, Oil blurs, so I tried it as the first O-ring lip
First of all, the making is slightly larger than the groove to be installed
Oil leaked after installing and running for several hours
I tried to remove it, but it was cut etc.. I could not find it and it fell into the groove
I bought about five so I opened another one and confirmed it, but it was the same
Paper type was better than paper type.
View detail
Good product if you care about the appearance.
I installed it in the outside Tank.
Accuracy etc. Although it is fine without thinking, whether the material is soft, when tightening gum Tapeetc. If you do not paste it will get scratches. Also on. off also moves with a light force so it will move if you catch on something beat.
As it is a very compact Cook, narrow place etc etc. The advantage that you can use is also very good.
View detail
Fits: HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON SOFTAILFamily
it's the best
We are reworking to respond promptly.
I thought it would take more days to arrive.
I look forward to working with you.
View detail
good
Although it is disposable, I always use it because Cost performance is good.
However, it is good if it is important to look good because it is Small, but I think that it is better for high-performance objects to seek performance.
View detail
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON Pump head, HARLEY-DAVIDSON TOURINGFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON Shovel head
Cost performance High
I use it with BMW R100Series.
There is not conspicuous trouble and good use feeling.
It was a good look for me.
Plug's TerminalCap is not attached so you need to be careful when changing from OEM code.
View detail
I think it's good.
I purchased it for preparing Restore.
I searched for various things, but it was good that I could buy good goods cheaply.
I would like to take care of you in the future.
View detail