Reviews
This is a winner Parts! This solves the problem! Recommended!
None of the other similar cheap parts worked….
I changed to this and was Large satisfied!
I wish I had not been stingy and had chosen this one from the beginning.
I highly recommend it.
View detail
Along with Handlebar replacement!
Replace the tight cable with a new handlebar,
This is perfect!
The texture is nice and satisfying!
View detail
Long fork and handlebar replacement!
Used for long fork conversion and handlebar replacement!
The texture is nice and LargeSatisfied!
View detail
Simple and good, but accuracy is disappointing.
It is a simple design and looks good on a custom motorcycle, but the feel of the switch is not good, and the precision is so poor that it locks up and stops working after use. View detail
Look so good!
Cool. The grips mounted accurately on the 1inch handlebar. The processing is very perfect, and the feeling is very good View detail
Although it is a reasonably priced grip, in the makeover of a motorcycle, it is an operative outclassing!
Although it is a reasonably priced grip, in the makeover of a motorcycle, it is an operative outclassing! View detail
70's ape handle
I really like the size and height overall design. The handle I used before feels a bit round. I was a little disappointed in the design, so I bought the ape handle. It's nice to have the shape you want. I like it very much. I like it, it's neat, and the delivery is fast. I really like the size and height overall design. The handle I used before feels a bit round. I was a little disappointed in the design, so I bought the ape handle. It's nice to have the shape you want. I like it. Good, clean, fast delivery View detail
I like under-mirrors. The mirror is short and nice.
I like the under mirror. The mirror is short and cool. It's neat because nothing comes up above the handle. And you can see the mirror well. However, there is a disadvantage that the paint comes off when fixing the mirror. View detail
This is Simple.
The Clamp part was unreliable and cracked.
It's a shame because it's cool.
View detail
The size you were looking for.
I've made it a HornButton in Custom'd CUB.
The pedestal is cut and drilled from Aluminum number.
The original Engine Starter Motor part is used.
Screw holes are made with Tapping to stop it.
I think I did a good job.
It's a light Touch, just right for the feel of the HornButton.
It was a good buy because it was inexpensive.
I recommend it to anyone who can process and use it.
View detail
Small and luxurious is perfect.
It can be easily installed in a small hole.
Although it is quite small and not conspicuous, it is assumed to be for HARLEY and has a sense of luxury.
However, it is not unbelievably expensive, and it is a good choice for the person who wants to differentiate from the low price thing in the similar Parts because it is a price range that is easy to get.
The durability is also quite good; there has been no noticeable deterioration after more than five years.
I lost it while driving just the other day, and I feared it might still be there, but I was relieved to find it was available for purchase.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It's perfect for Refresh.
I bought this as a Refresh because the Bolt on my Switch box was rusty and not looking good.
OEMBolt is very expensive, but this one is cheap and can be used for OEM same etc.
It's good because if it gets rusty, you can easily replace it.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It is effective for Refresh.
I bought this as a Refresh for my Harley XL1200C SPORTSTER 1200 as the Bolt on the Switch box was rusty and not looking good.
The OEM Bolt is incredibly expensive, but this one is far less expensive.
I can use it normally without any problem, so if you are going to buy it, I would definitely recommend this one.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
You can Refresh Bolt!
I had a Timing to disassemble the Switch housing on my XL1200C SPORTSTER 1200, so I bought a Bolt to Refresh it.
The OEMBolt is older, so it had some White dulling and a little Rust.
I was able to Refresh by replacing it with this one.
It was good, especially since it was so visible.
Also, the Bolt will be changed from Torque to Hex, so it will be easier to do the next maintenance.
View detail
High cost performance
My car is a FATBOY by Harley-Davidson, a 2019 model. I lost a few screws on the handle, searched the original part number on the webike, and then bought this sub-factory. The quality is not said. High cost performance. ---------------------------------------------- My car is a Harley-Davidson FATBOY, 2019 model year. Screw on the handle lost a few, the original part number on webike search, and then buy the deputy factory. The quality did not say. High cost. Powered by Google Translator View detail
I like the handle
As you can see in the picture, the shape is sprinkled and the material is sturdy. Shipping was also fast and well packaged. I have installed it temporarily before work, but it has a good shape. The height is 8 inches, and the position is quite comfortable. The chrome details are pretty good too. ------------------------------------------------------------ -------- The shape ppugo like we saw in the picture looks even stronger material. Shipping is also watneyo doeseo well packed fast. Haebwatneunde still attached temporarily to work around the shape yippuge good height also appears adequate 8 inches high position also comes quite easily. Chrome detailing is pretty good. Powered by Google Translator View detail
Satisfied with Cospa
I replaced Guts Chrome's 10InchRobot Handlebar with this Handlebar.
Guts Chrome's Handlebar is very satisfying with its low price and clean paint job.
View detail
no problem
I bought it because of Sports' pre-existing condition, Oil leaking from the root of the Clutch
The leak is gone, but how long it will last depends on luck
I'm not sure how effective the Clutch Cable itself is at replacing it, and it's normal for wear and tear
View detail
ClampMirror
ClampMirror's unique construction
The point of this product is its rugged construction, which is not seen in neat and high-tech products
Enjoys ageing The rust comes out in moderation But the Mirror part works just fine!
This is the kind of ironwork that goes well with a motorcycle
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It's useful enough
I bought it for maintenance
It can be used for the same as the OEM Product, etc
Buying an OEM Product is expensive, even though it's just a Bolt
I am happy with this one as it is very inexpensive
View detail