Reviews
Fits: HARLEY-DAVIDSON
My second purchase.
This is the second time I bought the rubber for shielding when I insert the KEIHIN FCR Carburetor Body 41mm into the Carburetor Joint of my 2000 TC88 FLSTF FLSTF FATBOY. I bought the same thing when I overhauled the FCR Carburetor Body 41mm about 10 years ago and installed it. So, I wrapped the carburetor's insert port with a white tape that I wrap around the carburetor's insert port when connecting the gas line, and the engine is running well without secondary air. View detail
Fits: HARLEY-DAVIDSON SPORTSTERFamily, HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON FLT, BUELL
To NIGHTSTER.
The STAND that wanders around.
It was neatly settled.
It is also less likely to rub when folding Left.
I'm satisfied
The ring was too narrow to fit in the installation.
With Pliers and MONKEY
The rings were slightly widened for installation.
View detail
looks good
The quality is good, but there was no breeder bolt washer for the Cv carburetor
It is a bolt-on configuration and fits well.
Please note, however, that there is no breather bolt washer. ---------------- The Quality is Good, But there was no breeder bolt washer for the cv carburetor
Powered by Google Translator
View detail
Fits: HARLEY-DAVIDSON Universal
It doesn't fall out.
The Large change is helpful because it definitely works and does not pull out while driving. View detail
![[V-TWIN] Clutch Plate Kit](https://global.webike-cdn.net/photo/impression/24/24c78cce904ef0c875c37743e50cf944L.jpg)
Fits: HARLEY-DAVIDSON SOFTAILFamily, HARLEY-DAVIDSON DYNAFamily, HARLEY-DAVIDSON TOURINGFamily
ShovelClutch good!
I replaced the Clutch board on my 78 Shovel with this one.
Open primary, so replacement is very easy.
Judder was not occurring, but the surface of the existing Clutch board was beginning to scrape slightly, so it was replaced.
There was no confusion as it is listed as dry and wet Clutch compatible.
The initial delivery time was about a month, but when I opened the lid, it arrived in about two weeks.
It is a happy miscalculation.
After replacement, the cleanliness of the Clutch was also improved.
Next time, I'm thinking of replacing the SteelClutch Plates as well.
Is it good or bad that Shovel has to maintain the Clutch board on a regular basis so it is easy to notice any anomalies?
View detail
There is a sense of retro.
It is made of brass, so it has a nice color and a retro look, and it gives a taste when it is attached to the carburetor. The price is reasonable and the quality is good, so you can use this mixture screw with confidence. View detail
Fits: HARLEY-DAVIDSON Universal, HARLEY-DAVIDSON Others
Repair Parts in case of emergency
I am very happy with the quality of the product. View detail
A must have for old cars
This is a must have for old cars, I used it on my CRcarburetor. I used it on my CRcarburetor. It looks good and is transparent so you can see inside.
But once I put the Hose on and tried to take it off again, it broke ….
Well, it's a cheap Parts, so what can I do?
View detail
Fits: HARLEY-DAVIDSON Universal
Silicon grease
It is better to apply a thin layer of silicon grease when assembling. View detail
Fits: HARLEY-DAVIDSON Universal
squishy
It's a good product, Large without squishy feeling. View detail
Overpriced performance.
Anyway, the price is very cheap and reasonable, and the performance is no different from NORMAL Headlight Bulb. I think it's very convenient to keep it in stock. I think it depends on the usage situation, but it is durable and long lasting. View detail
Convenient for Stock
I have 3 HS1 Scooters in my stock and they are the best headlight bulbs for my inventory as they are compatible and cheap. View detail
Fits: HARLEY-DAVIDSON Universal
Still no leak.
You can rest assured that it hasn't leaked yet. View detail
Dedicated Hose Band
Material:I can tighten it firmly with the Hose Band of Stainless Steel, and can use it safely without the worry that Fluid will leak. Because it is easy to tighten and loosen, it is convenient to be able to correspond even if the thickness of the Hose changes very well. View detail
Fits: HARLEY-DAVIDSON Evolution, HARLEY-DAVIDSON Bread, HARLEY-DAVIDSON Shovel, HARLEY-DAVIDSON SPORTSTERFamily
Neutral switch
Suddenly the Neutral lamp did not come on and I checked the Neutral switch and found there was no continuity. I checked the Neutral switch and found no continuity. After replacing the Neutral switch, I was able to solve the trouble immediately. View detail
For FRP Tank production.
I bought this for my One-off FRP Tank creation.
It is a domestic (Honda) standard and is the same as the old SUPER CUB, CD50/90 and XL250 series.
So it is compatible with Cap.
Until 20 years ago, there was only weld mouth Gold for HARLEY, but now there is such a mouth Gold for Japan car standard
It was a good time (I didn't have the mouth Gold I wanted back then, so I made my own with Cut-out).
For Welding's mouth gold, there is no gluing allowance when attaching it to the FRP tank, so a strip is cut out from a thin steel plate.
I annealed it, bent it around to make a Doughnut shape, and attached it to the mouth gold with Silver Low to make a flange that can be used as glue.
VinylEster resin is mixed with Fiber and Barrelk to make a glue and fixed, and finally reinforced with Glass mat.
If you use VinylEster resin, it won't leak no matter how many years you use it, but don't use Polyester resin.
The product itself is well made, but it is not as good as it is supposed to be. "When welding to iron tank has no ears.
It's tough unless you're TIG welding, and if you're using non-gas semi-automatic you have to do it from the back. Har of rubbing together.
The dollar is going up, but I'm not sure if I should stick with Silver low.
Cap also works normally. However, the air vent is poor, so it may leak when you put it in a full Tan.
If you want to make your own tank with FRP or thin aluminum, you can either buy a cap of the type to attach the tube, or you can use a cap of the type to attach the tube.
It is advisable to provide a separate air vent at the time of construction.
And it's a large thing, but the finish of the part where the packing of the mouth Gold and Cap hits is messy.
There is a Case which leaks slowly. This is a case that is leaked slowly with Paper No.1000→2000 after Tank is completed.
If you sharpen it and polish it a little, it will fit.
Just like that. There is some difficulty, but it is the most convenient Items for the person who makes Tank by oneself.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It's perfect for Refresh.
I bought this as a Refresh because the Bolt on my Switch box was rusty and not looking good.
OEMBolt is very expensive, but this one is cheap and can be used for OEM same etc.
It's good because if it gets rusty, you can easily replace it.
View detail
Fits: HARLEY-DAVIDSON 1996-2011(for Switch box)
It is effective for Refresh.
I bought this as a Refresh for my Harley XL1200C SPORTSTER 1200 as the Bolt on the Switch box was rusty and not looking good.
The OEM Bolt is incredibly expensive, but this one is far less expensive.
I can use it normally without any problem, so if you are going to buy it, I would definitely recommend this one.
View detail
Bought because of Brake switch failure
This product is different from the description.
In fact, Washer is not included.
The end of the cord is clamped to the terminal.
If it does not fit your Motorcycle, you will need to rewire it.
The make itself is a good one.
View detail
Austere looking.
I like the look of it, and it doesn't contain any gold, so you can cut it with a pair of scissors. However, it is easy to unravel from the cut line, so if you don't cut it after wrapping Vinyl Tape around it, it will unravel soon. I think it's soft and easy to use. View detail