Reviews
Fits: Others Brembo 14-19RCSfor Master Cylinder
Design priority is this one.
I chose it only by design, but I am satisfied. There are inconveniences such as the capacity is small and it is necessary to check Oil frequently at the time of maintenance of Caliper, but the design is so excellent that it does not become painful. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Stylish is enough for your needs
OEM is Dry sump system, and SR is derived from Off-road motorcycle, so Under Guard is very Large threshold.
Since I only drive on road, I was looking for something small and stylish.
Because the Exhaust System was replaced, it was hard to replace it, but I managed to do it without removing the Exhaust System.
The SR has a lot of vibration, so I applied a medium strength loosener to the Bolt.
The OEM wildness is gone and I'm happy with it, but no one will notice unless I tell them.
It's shorter than OEM, so it's not perfect, but I think it's necessary and sufficient to protect the Oil line.
As for the situation, I used Touring because I am Touring Main, but I think it is suitable for both Street and Circuit if it is not Dirt.
View detail
Fits: HARLEY-DAVIDSON DYNA [dyna]., HARLEY-DAVIDSON DYNA [dyna].
Touch is good and beautiful
The brakes on the FXDC DYNA SUPER GLIDE CUSTOM are very hard to step on, and I used to use KIJIMA's pedal cover, but as I got used to it, I started to worry about the appearance. It's a great product with a unique sense that large manufacturers don't have. The developer of this product is also the owner of FXDC DYNA SUPER GLIDE CUSTOM, so the function of this product is also very good, and the touch of the brake is very good. The installation itself is not difficult, but in my case it was difficult to pull out the clip of the moving part without removing the exhaust system, and this was troublesome. I'm happy with the function and the beautiful molding. View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
As a guide for KICK starting.
I had to replace my OEM Indicator because it was cloudy and hard to see.
From OEM [Color] Clear and Small window is easy to see and use.
When you start to KICK, you have to find the upper dead point of Piston and KICK to start.
good point
I've been using them for 2 years and have no problems at all.
●From OEM [Color] It is easy to find the upper dead point because the clear part is wide.
Gasket for installation is also included.
A bad point
None
Lately, I've been using less force to KICK, and I want to use as little force as possible to KICK.
It is a KICK with Piston's movement neatly identified.
It looks good and functions well.
View detail
Fits: Others Brembo 14-19RCSfor Master Cylinder
Design priority is this one.
The feeling of integration and texture with the Radipon is great. What is the disadvantage? The capacity is so small that you need to check the remaining capacity frequently during maintenance. There is no window to check the remaining capacity, but the design is so excellent that it doesn't matter. I recommend it to anyone who wants to refreshing around Handlebar. View detail
Fits: Others
Honestly Cool.
I've been looking for a Mirror Clamp.
I've found Craftman's products among many others.
Mirror is offset to the outside
And the colors are very nice.
You can also paint the logo of a casual C in white red.
This Clamp makes me want to make the Bolt a Titanium!
View detail
Fits: その他
I bought it to install the HurdleMirror.
Well made, good color, and the price is worth it.
cMark is seriously digging it and it's interesting.
I would like to buy from you again in the future as you are a reliable manufacturer
View detail
It's a solid fit.
I installed it last month at the same time as the RCS, and I was looking for a small size tank that doesn't interfere with the Handlebar area, so I used it, although it's a little expensive.
It is necessary to remove the lid in order to see the amount of fluid, etc., but since the Fluid is replaced at each inspection, it was introduced after determining that there is no problem.
The texture is good and I am pleased with the perfect fit to the Brembo master.
I'm sorry, but I'm not sure about cost performance yet, so I haven't rated it.
View detail
Fits: KTM DUKE390, KTM 200DUKE [Duke]., KTM 200DUKE [Duke].
If you're not happy with Initial ModelSmallDUKE's Shift, it's worth a try
2013 DUKE 200, from the beginning of my purchase, I was worried about the large stroke of the Shift and
The Left ankle gets pretty tired after half a day of riding the frequent gear changing mountain passes
1→At the time of 2nd gear change, it goes into N as if it were trapped (the GEAR display part is (It's not even a zero, it's a blank)
I was having trouble with a situation that often left me blanking in traffic, so I did some research and found this I bought the product with the intention of buying it because it seemed to be the right fit (I think it's a bit expensive)
Results, currently good
Large size of the Stroke of Shift change may seem like a very subtle change, but the 1& rarr; 2-speed Change is now clearly Smooth
No particular inconvenience to put it in the N
The texture and finish is very good, and I have no problems with the installation
In the review by others, I'm putting Spacer in to prevent ROD and STAND from interfering with each other, and but we were able to keep it as it was, with pomp and no interference
The nut size of the change rod is 11mm, which is relatively minor in Japan Note that I think it's Size
View detail
Fits: KTM DUKE390, KTM 200DUKE [Duke]., KTM 200DUKE [Duke].
It is very easy to handle.
Made better than OEM's Shift arm, it's easy to use.
Neutral feels a bit spicy, but it seems to be a problem with the vehicle.
View detail
Fits: KTM DUKE390, KTM 200DUKE [Duke]., KTM 200DUKE [Duke].
I wanted it at OEM
I am going to make the end ROD Grease inclusive
I am exchanging.
By using this Stroke got shorter
Even better feel.
Mounting Easy.
Recommended if the budget allows.
View detail
Fits: Others Brembo 14-19RCSfor Master Cylinder
I was fat and was longing to wear leather pants. My wife said I could buy a pair if I loose weight. ( She didn't think I could.) So I went on a diet and reduced 15 kilograms in 5 months and finally got hold of them. I was impressed with TS TAICHI value. T
I was fat and was longing to wear leather pants. My wife said I could buy a pair if I loose weight. ( She didn't think I could.) So I went on a diet and reduced 15 kilograms in 5 months and finally got hold of them. I was impressed with TS TAICHI value. The texture, design and functions are awesome.
I am 178cm heigh and weigh 72kg waist size is 82cm and extra large fits me perfectly.
I'll have to be careful of rebound.
View detail
Fits: その他
Although Mr. Craftsman's Mirror holder thinks that it is a little expensive, a structure Anodized etc. are one of the things satisfied dramatically. Since the variation in an Anodized has many brembo main parts, only the point said that a color may
Although Mr. Craftsman's Mirror holder thinks that it is a little expensive, a structure Anodized etc. are one of the things satisfied dramatically.
Since the variation in an Anodized has many brembo main parts, only the point said that a color may not suit just is regrettable.
View detail
Fits: YAMAHA SR500, YAMAHA SR400, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
Although it was the goods worried all the time, it purchased at last! The adjustment period of the Cam chain is a gadget known at a glance!! At the time of attachment, since a larger thing than the thing of a Cover with a pure Size of a Wrench is
Although it was the goods worried all the time, it purchased at last! The adjustment period of the
Cam chain is a gadget known at a glance!!
At the time of attachment, since a larger thing than the thing of a Cover with a pure Size of a Wrench is required, it is merely somewhat regrettable.
It is perfection except it!
View detail
Fits: YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500, YAMAHA SR400, YAMAHA SR500
[Webike Monitor] It attached to SR400 for 96 years. goods are solid by the STAINLESS STEEL, and also have intensity of enough. attachment was also able to make difficulty there be nothing difficultly. Although the figure is not differe
[Webike Monitor] It attached to SR400 for
96 years.
goods are solid by the STAINLESS STEEL, and also have intensity of enough.
attachment was also able to make difficulty there be nothing difficultly.
Although the
figure is not different from a NORMAL, it is pleasing from unfashionable touch of a NORMAL, and is large satisfaction.
View detail