Reviews
Too short
Made from nice and solid steel, pleasant to the touch. For my purposes and my lamp it turned out to be too short. The headlight was flush with the fork legs. If it were Z-shaped and 5 cm longer, it would be ideal. View detail
Introduced with AfterFire Ya countermeasure for external Exhaust System.
I used w800Final edition 2017 HOTRUN Exhaust System with KITACO Aluminum baffle and it gave me a large afterfire sound when Axel OFF. AfterFire at AxelOFF and 1200 RPM on a descent was reduced to about two thirds, and the banging sound became a little softer. AfterFire sound during quick driving is no longer bothersome as it was during NORMAL driving. I think it is a good product with low price and easy to understand the effect. It would have been better if the included Bolt was Stainless Steel like the OEM Bolt. View detail
Cool Retro Headlight
Works like a charm. Bought this to replace the big stock headlight! Loving the look now after installation and its easy too. View detail
Fits: KAWASAKI W800, KAWASAKI W400, KAWASAKI W650
Size feeling is nice.
tall (of a person) (180cm) The Seat was thick and had good balance.
I don't know if it's because I just bought it, but it feels a little slippery. We'll see if it will become just right as I use it.
I really like the balance of the look after installation.
Cushionability is also good
View detail
awesome
About the feeling of use: It was so cool and similar to the existing tank, so there was no inconvenience Products to Buy Together: Footpeg Installation Difficulty: Easy Cost performance and comparison with other products: I don't know because I haven't used other tank styles. Shipping and packaging information: It has been delivered very well. Concerns, precautions, or advice when purchasing It is recommended to purchase oil caps and oil controls together. View detail
I was wondering about the w650 and put it on!
Easy to use and good quality. posh w1TypeExhaust System is used, but Clearance seems to be Limit or interference. View detail
It is easy to install.
It is very convenient for refreshing around the handlebar! View detail
Mirror Replacement
It's cool
I'm happy with that.
View detail
The effect is …?
Replaced with PoshSlip-on Silencer and purchased as an After Fire measure.
was not very effective in my case.
After adding DAYTONAInner silencer to the Exhaust System and adjusting the Air Screw, the After Fire stopped sounding in 5th gear partial.
I tried using this Plate on top of that, but it felt almost the same and I couldn't really tell the difference.
Currently, aftershifting to 4th gear with the inner silencer covered with aluminum tape does not cause afterfire, but this too will eventually cause afterfire depending on the rpm at that time.
I know some people might say that if I don't like it that much, I should just go back to OEM, but I don't want to give up the sound of Posh, so I guess I'll just have to compromise where I find it appropriate.
View detail
MOTOR ROCK Front Fork Cover
Motorlock Front Fork Cover It was recognized by w800, but it was difficult because it was for w650, and various things had to be customized due to the pressure of the shopper, such as interference with the panda. After successful twists and turns, it became a beautiful appearance after completion. Replace Shoba Spring with Hyper Pro Spring The perfect performance has been achieved. View detail
MOTOR ROCK Front Fork Cover
The delivery is fast and the quality is so luxurious. It's nice to see a more classic side. Upload photos mounted on the w800. I have purchased many motor rock products and have never been dissatisfied. I love motor rock. View detail
MOTOR ROCK Front fender
MOTOR ROCK Front fender I love motor rock! I bought it to fit with the front fork and I'm very satisfied with it. Post a picture that is mounted together. I'm so satisfied. It's pretty. ^^ View detail
MOTOR ROCK front turn signal bracket
It's been a while since I bought it, so I leave a review. It's simple and looks too satisfying. Motorak is love. The delivery is fast and the quality is good. I like motorak. Thank you. View detail
Easy installation even for custom beginners
2017 SR400 FI (RH03J) I installed it in the engine. I think anyone with a Wrench of the right size can install it.
The included Instruction Manual does not explain the installation method very well, but you can easily understand it by watching the installation instruction video uploaded by MOTOR ROCK on YouTube. In the video, the Seat and Tank are removed before installation, but if ease of turning the Wrench is not a priority, it can be installed without removing them.
By the way, how to use (Timing to pull Lever) is different from the OEMDecompression lever. MOTOR ROCK has uploaded a video explaining this point, so I think it is a good idea to watch that video.
This is recommended for those who want to keep the functionality of Decompression while Lever and Cable are out of the way.
Aside from that. The way he puts Engine on, the layman's eye doesn't know what he's doing." I think that this is a part that will stick with those who are romantic about SR's Kick start, because it increases the number of
View detail
Motor Lock Tachometer Blind Cap
The price is lower than for others and the quality is high. View detail
As comfortable as original thick seat but will stylish looking.
Fitting On: SR400 Different: As comfortable as original thick seat but will stylish looking Opinion: The overall size is slimmer than original seat, the cushioning is still comfortable as OE one. However, need to be ware of the rear fender during installation, my rear fender is touching the seat and I need to make a adaptor to rise up the seat height to prevent any touching. View detail
Very good
"Classic style is enhanced
I'm taking it out now, but I'm going to put it in
The price is high but the quality seems to be good
But it's so slippery that my butt slips
If you prefer this look, there is no other option.
I am now ordering an additional 650 seat and coming.
Anyway good ----------------------------------------------- ----------- Classic fashion rises It's out of now, but it's in alternating The price is expensive, but the quality is good But it's so slippery that the butt slips If you prefer this look, there is no other option. Now I am ordering an additional 650 sheet. Anyway good Powered by Google Translator"
View detail
looks great on my bike.
It seems very well made, solid as a bell; a real atavistic look backwards to a different time and place. It really does have that "rocket man", Buck Rogers, tail fins and roaring tail pipes sense to it. It will really look good after you get it to the point of being able to install it. The finish on the lamp body is really almost perfect in those areas where it was easy to polish it close to perfection. Under the bottom of the lamp, though, both items I have are VERY rough with mold marks and imperfections that probably weren't easy to get to and, so, were just given a hit and a(n unkept) promise. You really can't use it as is until that area is addressed. Look at the top picture, under the lamp globe and you'll see the mottled look I'm talking about. And this one was almost a killer for me; the bottom plane of the body isn't flat. It's concave as if it was designed to fit on a specific fender or other curved surface (and it probably was). But there's no mention of it, the pictures don't really address that view and I didn't notice it until we were to the point where we were going to start locating bolt holes. We're going to have to have an adapting plate machined to mate our flat fender side to its curved bottom outline. Shoulda looked sooner but, well, I didn't. But the overall look of the item is just what I thought our bike needed and I hope my client can be talked into the extra cost for the adapters because these lamps absolutely MAKE the final look of this bike.Just know up front that there's more work ahead on the finish. View detail
Looks and builds well.
This product is a replacement for a short fender+Lucas lamp made by DAYTONA for SR400, but the R of this product and the fender do not match.
At first, I put it on forcibly as it was, but the Number shook a lot due to vibration, so I bought a Rubber Sheet at Home center and put it between the gap and the License Plate.
After that, I re-drilled the holes in the Fender to reattach it a little closer to the Seat, and replaced the screws that came with the Fender with Firmly screws.
View detail
Fits: HARLEY-DAVIDSON FrontFork Clamp Bolt with 3/8-16 threads
Very good quality!!
Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!!Very good quality!! View detail