Reviews
It is attachment at DR-Z400SM. Although it attaches and about one year passes, there are not the scar of an anodized portion, having become thin, etc. (A sheet is put and kept at a garage) The thickness of the plate, etc. are solid and it is satis
It is attachment at DR-Z400SM.
Although it attaches and about one year passes, there are not the scar of an anodized portion, having become thin, etc.
(A sheet is put and kept at a garage) The thickness of the plate, etc. are solid and it is satisfied.
Since a chain lube etc. will scatter after carrying out chain maintenance if normal is compared, it is indispensable to carry out chain maintenance firmly.
It is not dissatisfied although it is the parts focused on appearance.
View detail
It's not something you can really feel, but...
This part shuts off the introduction of secondary air.
The installation itself is easy, but it is quite Large strange to that point.
I have to remove the tank, air cleaner box and flip the rubber cover for heat shield.
The back side is threaded through the throttle body, so you can flip it from the front side.
In order to do so, the Ignition and Sensor connectors connected to the cylinder head must be disconnected.
If you remove the fixed Bolt of Radiator and set it to Free, you can flip the Cover.
Rubber cover has to be cured Throttle etc. because of the sand and dust on it.
The product itself is Cut-out of Aluminum, and the texture is high.
After all, it is expensive for the parts and a bit heavy compared to OEM.
It's a shame because weight reduction is a very simple task and I would like to gain more value with external parts like this. (Although it is lighter in terms of the whole system)
As for the effect, in the case of Racing Exhaust System of AKRAPOVIC
The bobbing that happens just before I fully revert the Axel has improved.
It's not completely fixed. It seems to have an effect on After Fire of a common popping sound, but it doesn't know because it doesn't have it originally. Probably, it will be effective for that one.
As for the OEM, there is no change at all.
I've heard that it weakens the embrasure, but no there either.
(I'm not sure about Mechanism on this one)
View detail
Chain Guard
Parenthesis I hope you are feeling better 。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。。 View detail
Bolt was too long?
It's easy to remove the NORMAL cover and install it, but the upper long one of the two Bolt was about 5mm too long?
So, put the supplied collar on the outside and bite the 5mm collar on the inside and install it anyway Were you able to?
View detail
It was easy to install
Except for the Caliper support, it's easy to install because it's an OEM parts diversion It can be done
Brake hose is not available for OEM products
View detail
Fits: YAMAHA WR250R, YAMAHA WR250X, YAMAHA WR250R, YAMAHA WR250X
Simple
It is a simple Guard that only prevents entanglement. If you remove the OEM, only the installation part will remain, so I will use it temporarily. Impression of appearance changed a little by pasting Carbon style Cutting sheet. View detail
Price suitable
I wish Bolt for installation was included and included.
Although making was Simple, I did not have instructions and so on, but I think that it can be installed easily.
View detail
YOSHIMURA's Silencer - - -
Purchase to use for YOSHIMURAExhaust System of KLX 250.
The shape of Silencer is inconvenient, hits at Limit and does not attach - -
Probably not, return to Normal muffler, use with D-TRACKER.
Can be installed without problems with DAYTONA's Exhaust System.
Some Silencer required processing.
View detail
The After Fire was uncanny when WR250R carried out Muffler exchange.After that was as uncanny as it thought whether the Muffler broke attached and carried out the clean cut, the After Fire was completely lost.OK and anyone can do attachment.AI system
The After Fire was uncanny when WR250R carried out Muffler exchange.After that was as uncanny as it thought whether the Muffler broke attached and carried out the clean cut, the After Fire was completely lost.OK and anyone can do
attachment.AI system picking outside carried out after clean cut attachment.The Blind of the Air cleaner box left the Hose of Ai System by the side of a VOX, and used the Blind lid which was attached to the Hose at the clean cut.After removing
Ai System, since Engine left-hand side felt it refreshed, the phon was attached backward, and also it was felt refreshed.
View detail
Fits: KAWASAKI D-TRACKER [D-Tracker].
Attachment is very easy... only inserting -- -- merely -- up to [ there ] -- that of an Expose -- just for a moment -- very much (it will exchange, if there are smile time and knowledge -- valuable -- it is -- upheaval is good -- although it doe
Attachment is very easy... only inserting --
-- merely -- up to [ there ] -- that of an Expose -- just for a moment -- very much (it will exchange, if there are smile
time and knowledge -- valuable -- it is -- upheaval is good -- although it does not become precocious, there are effects of enough)
View detail
It attached together on the occasion of Muffler exchange. attachment is dramatically easy. It is a Recommendation at the beginners. However, since A.I. Artificial Intelligence equipment remained as it is, it was set to three.
It attached together on the occasion of Muffler exchange.
attachment is dramatically easy.
It is a Recommendation at the
beginners.
However, since A.I. Artificial Intelligence equipment remained as it is, it was set to three.
View detail
being NC shaving and coming out, although there are a direction made on one's own and goods same from several companies -- merit [ processing accuracy ] -- since that was right, it purchased. Actual goods are also made carefully processing of the accuracy
being NC shaving and coming out, although there are a direction made on one's own and goods same from several companies -- merit [ processing accuracy ] -- since that was right, it purchased. Actual goods are also made carefully processing of the accuracy of a clamp face, and a Bolt hole, etc. Although a little high mind was also carried out, since time and effort was taken, it was thought that it was an appropriate amount of money. View detail
It is attachment at DR-Z400SM. Although it attaches and about one year passes, there are not the scar of an anodized portion, having become thin, etc. (A sheet is put and kept at a garage) The thickness of the plate, etc. are solid and it is satis
It is attachment at DR-Z400SM.
Although it attaches and about one year passes, there are not the scar of an anodized portion, having become thin, etc.
(A sheet is put and kept at a garage) The thickness of the plate, etc. are solid and it is satisfied.
Since a chain lube etc. will scatter after carrying out chain maintenance if normal is compared, it is indispensable to carry out chain maintenance firmly.
It is not dissatisfied although it is the parts focused on appearance.
View detail