Reviews
Fits: HONDA CROSSCUB110, HONDA MONKEY125, HONDA CT125, HONDA DAX125, HONDA GROM
It looks good, but...
As the Title says, it looks good, but …Oil leaked when leaning Left in Side Stand and Idling.
Of course, the O-ring is coated with oil and the bolt is tightened to the specified value.
We also did the masks with Oil Stone.
Is it defective or is it an accuracy issue?
View detail
Blinker Relay 12V 2 Pin for LED
Blinker relay went bad, so I bought this one.
I'm thinking of using an LED Blinker in the future, but not LEDs at the moment, but that hasn't been a problem.
View detail
Orange color and different!
I am using the same type of fog in Orange color with the same type of car (Ninja 250SL), but…the light is a little darker. I'm sorry to say that the response is a little sluggish…Orange color is more recommendation! View detail
Fits: KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR400, KAWASAKI GPZ400F, KAWASAKI Z400FX, KAWASAKI Z400GP
cheap
OEM Product was dirty for Large, so it was replaced.
No problem for use
View detail
Songe quality is good, but the costa….
I am satisfied with the durability of the product even after applying filter oil, but it is a little expensive!
I would have been happy if it had been a little more cosy!
View detail
Yellow color is too strong.
Color is "Color:I was expecting a slightly yellowish color like a light bulb, but when I put it on, it was a bright yellow color.
The product itself is very good.
View detail
quality is worth the price
I used it on my Racer YZF-R25.
Because of the change in Silencer, the position of the Spring hook has changed,
Introduced because of the close proximity between Spring hooks.
The quality is...reasonable for the price. Probably the same as what is sold in CHINA on Amazon or Yahoo!
It is not unusable, but its life as Spring seems to be short.
Be careful not to pull it too hard, as it may break.
The range of use is from about 65mm to about 75mm, but I think 75mm is too much.
I can only see a future where the Spring will break due to vibration while running...
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90
Looks good!!!
It looks great!
The only regret is that the hinges have to be modified a bit and that they interfere a bit when the seat is raised! Well, I will redo it again because I just need to modify it a little more...
View detail
MAD MAX z2TypeMirror
The Mirror was rusted, so I replaced it with a Mad Max z2Type Mirror!
They're inexpensive and they look great!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90
Tuck roll keeps it from slipping!
After years of use, the epidermis is hardened and chica...
Quantities before and after the ride:Pair (for Left and Right) You're slipping to the
This product is inexpensive and Bolt On installed!
If I had to reupholster it, I'd get a whole new Seat base!
The good thing was that my butt didn't slide forward on the downhill, or so I'm told.
It's hard to slip, and as a result, it feels easy to ride (laughs).
Seat is thicker than OEM, so it sits a little higher on the hips.
So if you're short or something, just be careful there!
View detail
It's bigger than NanBar size.
I was looking for a NORMAL frame, but I found this product and bought it because it was available for mopeds and 125s.
The other thing was that it was difficult to align and fit them together.
View detail
Fits: その他 , YAMAHA Grand Axis 100, YAMAHA gear, YAMAHA Axis 90, YAMAHA Axis 50, YAMAHA VINO, YAMAHA TZR50, YAMAHA TZR50 R, YAMAHA TZM50R, YAMAHA JOG Aprio EX, YAMAHA RZ50, YAMAHA JOG Aprio 2, YAMAHA JOG Aprio, YAMAHA JOG90, YAMAHA JOG Sports, YAMAHA JOG Z2, YAMAHA JOG ZR, YAMAHA JOG Z, YAMAHA JOG EX, YAMAHA JOG C
It works fine as a function.
Fits YSR80 Normal cab.
The effect as a Power Filter was fine.
I chose the one with Cover because I often drive in the rain, but the Center was out of alignment and the Filter was in contact with the edge, so there was a lot of vibration during air intake.
I'm not sure if it's just because the price is so low or if it's just because the price is so low. I am a little disappointed though.
View detail
A little Size.
I bought it thinking it would be a little larger than the Number because it was for 50-125. Also, the pcx mounting bolt is a little short, so you may need to buy a separate bolt with the thickness of the plate. View detail
Some protection for shoes
I use it on my Off-Road and Dual PurPass vehicles, not necessary when wearing Off-RoadBoots, but I think it's better to have it when riding with Sneakers. It is inexpensive and easy to install, just spray some Parts Cleaner and it goes right in! View detail
Fits: HONDA XR80, HONDA XLR250, HONDA VFR400R, HONDA VFR400K/Z, HONDA CL50, HONDA CB50, HONDA CB50, HONDA XLR250, HONDA hunter turnip, HONDA CB50, HONDA CB-2, HONDA CB-1, HONDA Hornet 600, HONDA Bently 90S, HONDA Benly CD90, HONDA Magna 50, HONDA Benry 50S, HONDA Press Cub 50, HONDA Hunter Cub CT50, HONDA BENRY CD50
After all, it is about the price….
After all, if the tool is not applied firmly at a price similar to the price, it is easy to lick.
However, the magnet also functions well, and iron dust is removed every time the oil is changed.
View detail
MAD MAXz2TypeMirror
There are many manufacturers of z2TypeMirror, and I was wondering which one is the best! View detail
It's not just the processing of some of the...
To be honest, it was difficult to install; OEM Valve Cover (1 Set of 2pcs.) The "H" was not able to fit in the bag, so I removed it and used it. The description said that it is waterproof, so I just use it as long as I am careful with water from the front cowl rather than water from the rain.
So far it is working fine.
I think the difficulty in adjusting the optical axis and the fact that the lens is not as bright as the Package can be discounted in terms of price.
I also have a spare Halogen, so at worst I can put it back together....
If you are looking for perfection, please make sure to ask a PRO person for help, and if you are thinking of installing it yourself, you should be prepared for a certain amount of forgiveness. The product cosmetically is good.
View detail
Mini Blinker
It would have been better if the Bracket part was flexible and Rubber type. View detail
Mad MaxExhaust System Baffle loss
Inner silencer came off and was lost during test run after installation of Mad MaxShort Tube. Worst of all, I had to go home with a straight tube. I had to go home with a straight tube. View detail
My wrists are comfortable.
As you can imagine, the effect is that Throttle becomes lighter, and just by accompanying it, driving at a constant speed + some ups and downs is easy.
However, the freedom of grip is lost, and even though I am using a soft grip (Pro grip), the grip on my small finger, ring finger and middle finger is not as comfortable as it should be.
It did not MATCH me.
View detail