Reviews
MAD MAXz2TypeMirror
There are many manufacturers of z2TypeMirror, and I was wondering which one is the best! View detail
It's not just the processing of some of the...
To be honest, it was difficult to install; OEM Valve Cover (1 Set of 2pcs.) The "H" was not able to fit in the bag, so I removed it and used it. The description said that it is waterproof, so I just use it as long as I am careful with water from the front cowl rather than water from the rain.
So far it is working fine.
I think the difficulty in adjusting the optical axis and the fact that the lens is not as bright as the Package can be discounted in terms of price.
I also have a spare Halogen, so at worst I can put it back together....
If you are looking for perfection, please make sure to ask a PRO person for help, and if you are thinking of installing it yourself, you should be prepared for a certain amount of forgiveness. The product cosmetically is good.
View detail
Cospar good
Used on a W650.
To be honest, the texture of the product is in line with the price, but … because of its low price, I have a good impression on the contrary.
I think it is very cosmetic.
View detail
Mini Blinker
It would have been better if the Bracket part was flexible and Rubber type. View detail
If you commute to work
I bought this for commuting. It's like 70% volume off of my normal volume. View detail
inoperative
Power Supply Cable and Pulse wire do not work even though they are connected properly.
（I told him that I wanted to know where the Pulse wire was taken out (only the LED light was on), and I told him again, but he has not responded again.
Be careful not to buy cheap!
View detail
Rubber is soft
It has a funny smelling rubber, but it is too soft and does not stop firmly, and the rubber is easily torn off when tightened too hard.
Due to structural problems, it will gradually come loose on its own.
It is vulnerable to climate change and other factors, especially noticeable in the summer, and will probably come off if it falls over.
View detail
Mad MaxExhaust System Baffle loss
Inner silencer came off and was lost during test run after installation of Mad MaxShort Tube. Worst of all, I had to go home with a straight tube. I had to go home with a straight tube. View detail
Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY
Mounting Bracket must be included.
I know you wrote that, but looking at the image, I mistakenly thought that the base was also included. View detail
Arrival of goods
I received the product. It was exactly what I ordered with no problems. Thank you very much. View detail
It got brighter.
Headlight case & Lens (H4 Valve) from Other Brand Product was installed without any modification, only replacement.
Although slightly inferior in Specifications (light output/power consumption) compared to Sphere Light, it is bright enough with low power consumption compared to the high-efficiency H4 Valve.
There is no mention of product life and there seems to be no warranty, but it has been working fine.
It doesn't say anything about Japanese Vehicle Inspection Correspondence, but if it doesn't pass, you can replace it with H4 Valve and pass the inspection.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2
It was cheap ….
[How is it used?
Purchased as OEM rust was becoming noticeable.
Was the one you received as per Image?
As far as I can see, it looks exactly like OEM Product.
Was the installation difficult?
I thought it would be easy since it was replacing an OEM Product.
How was your experience with it?
Installed in OEM light case but no Fit. Nah.
[Included Parts:were they on?
Included Parts:None
[Was there anything that disappointed you?
I had high expectations because the price was half the price of OEM Product, but the world is not so generous.
If you force it on, you can install it, but there will be a gap.
We will buy back OEM Product sooner or later.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 (Fi car), HONDA SUPER CUB70, HONDA SUPER CUB 90
Yellowing processing
The yellowish look will fit in A little old CUB. View detail
Blinker Valve replacement behind PS250
One of the beautification plans for the used PS250 is to change the Blinker from Orange color to [Color] I replaced it with Clear. So I had to replace it with Orange bulb, so I bought this one. This Valve is 23w, so it is for the back.
The old-fashioned Motorcycle seems to have been rejuvenated with a transparent and shiningly feel.
The used PS250 was a First Model Type, so it had square eyes. However, I replaced it with two round eyes like the Second Type Model (I had a hard time because the OEM is no longer available for this one). Especially, the frame of the light is not available. I bought one for ZOOMER for overseas). I painted the body like Second Type Model, so it looks young again at once.
I just wonder why the Valve with the Position lamp for the front is cheaper. This Valve in the back is 23w and I would like to see it sold in the $300 range if possible.
View detail
Replaced with Valve here as I had PS250's previous Blinker coverClear
I bought this one because one of my beautification plans for my used PS250 was to stop using the Orange color for the Blinker cover and replace it with Clear, but then I had to replace Valve with Orange. Yes, it's a waste of time. It's a waste that I can't use what I have so far. I could have replaced it with LED Bulb anyway, but then I would have had to replace the Blinker parts (I forgot the name of them). Also, I don't dislike the fact that I can see a little bit of orange color through the transparent cover, and it gives the car a nice, modern look.
However, unlike a moped, the Valve had to be inserted horizontally, so it was somewhat difficult to do. The work was easy and it took only 10 minutes to replace 4 valves.
One thing I wondered is that the front Blinker is 23/8W since it also has a built-in Position lamp, and the back Blinker is 23w, but the front one is less expensive and the back one is more expensive. I would understand if it was the other way around, but why is that?
And previously, Clear cover and Valve were Quantities.:It looks like it was sold as a Set, but it seems to have been discontinued.:I would be more than happy if they were sold at a discount at Set.
View detail
My wrists are comfortable.
As you can imagine, the effect is that Throttle becomes lighter, and just by accompanying it, driving at a constant speed + some ups and downs is easy.
However, the freedom of grip is lost, and even though I am using a soft grip (Pro grip), the grip on my small finger, ring finger and middle finger is not as comfortable as it should be.
It did not MATCH me.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
Brightness is very bright
The brightness itself is very bright.
The 400 had to be removed and passed through the inspection because of the inspection.
The light was Rose and Cutline did not appear.
Strangely, under the Light 1m in front is bright.
The second floor of the building was also illuminated, making it impossible to inspect the car.
The brightness itself is quite bright and easy to see.
Since they are H4, they usually illuminate just a little lower than usual, and if you use the High beam more often, you will be less likely to be bothered by other cars.
View detail
Great replacement for Factory cap
I bought this to replace the factory fuel cap for my 1995 Honda Super Cub. It fits exactly, and looks brand new. The rubber seal under the cap seems larger than factory but I have yet to have any issues with the cap. Mine arrived very shiny and without any scratches or blemishes. I think the only way someone could tell that this wasn't the factory Gas Cap is due to the fact it uses a non Honda Key. Highly Recommended. View detail
Satisfied with this price.
I purchased the Blinker to use LED bulbs when converting my Motorcycle to 12V.
It flashes well and does not look cheap.
I would buy it again even if it breaks.
View detail
LED Tachometer
Overall, it seems to move slowly, but for this price, it's okay. View detail