Reviews
Fits: KAWASAKI Universal, KAWASAKI Universal
Best
I like CarbonLarge, so Material:I bought this one from Carbon Style and it's good
Not badly made and very inexpensive, so I got a great deal!
If it deteriorates, I will buy it again
View detail
Fits: HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS(BWS), HONDA MONKEY, HONDA LEAD 50, HONDA LIVE DIOZX, HONDA FUSION, HONDA MAGNA 50, HONDA HORNET250, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA(MF08)
Full marks
For less than $1,000, co-spa is the best Grip
I was able to replace it with Smooth
Wiring is perfect, just in case
View detail
I use it to fix ActionCamera
I have it attached to the base of the RightMirror like this I'm using it, it's a little short of ActionCamera's Bracket, but it's in the way It's a good use of the product because it doesn't become View detail
It's a good co-spa and kills two birds with one stone!
The front and rear spokes of the XLR250R were quite rusty, so I had to remove the rust and then the anti rust I applied Engine oil on it with the meaning of "Engine oil" and used Spoke Wrap to hide rust and dress-up Installed
It's truly killing two birds with one stone!
The point is to apply a small amount of oil to Spoke and cut the tip of the back crack into a V shape Enter Smooth
View detail
Big Li in a better way than I expected
I used it on my SEA BASS DR250R
It was a used car in poor condition and the Seat was torn to shreds
When I peeled off the outer layer, I was surprised to see 3 layers of surprise & hellip; lol
It seems to have been forcibly repaired over the course of its long history
This time I was worried about OEM and DACHI Seat Cover, but it is a good price, so I was super I bought a cheap Mad Max Off-road Vehicle Seat Leather It was
The seat and the SIDE are separate from each other, with the seat surface being the normal leather and the SIDE It was punching leather
Cutting is also considered, and the seat of the Off-road motorcycle is unique to the It is designed to form a triangle when viewed from the right side
Because it is made to the Large texture to some extent, I think it is acceptable if there is a little anchoring
You may be able to limit the perfect Triangle Seat if it is 250cc class
Or perhaps the distance required in front and back would be shorter if you made it a triangle?
I used a Dryer to warm it up and a HandTucker to fasten it
First of all, position the front and back and snap with the HandTucker
From there, you can go laterally, diagonally and Quantity:Pair (for Left and Right) It was decided rather nicely when I fastened it to the uniform etc
If you pull too much, the Seat base will warp and go away, so only Wrinkle You just need to be careful about pulling a good pull without looking
In the unlikely event that it warps too much, you can remove one of the front and back and re-fasten it once
There will be some Wrinkle in the corners, but it's acceptable for poor amateur repairs
This is a recommendation for those who can't afford an external Seat or an OEMSeat Cover
In addition, it does not seem to have been treated with waterproofing, so there is no quantity:If you stop the 1pc.Vinyl, the Seat sponge will be hard to submerge in water
View detail
Fits: SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, HONDA ZOOMER(Ruckus), SUZUKI STREET MAGIC, SUZUKI SKYWAVE250 burgman, SUZUKI DJEBEL250 XC, SUZUKI DF200 DJEBEL, SUZUKI GRASS TRACKER Big Boy, SUZUKI GSX400, SUZUKI GRASS TRACKER, SUZUKI TS200R, SUZUKI INAZUMA400, SUZUKI TS125 HUSTLER, SUZUKI TEMPTER, SUZUKI ST250 E Type
MADMAX Grip
MADMAX Grip installed on a Honda Forza NSS 250. Soft to the touch, the product is made of rubber. The steering wheel is comfortable, the grip is good. MADMAX Grip installed on the Honda Forza NSS 250. Soft to the touch, the product consists of rubber. The steering wheel is comfortable to hold, the grip is good. translated by google translate View detail
Fits: KAWASAKI ZEPHYR400, KAWASAKI ZEPHYRX
Cheap and Cool!
Last time I bought RPM tubes to use in my ZEPHYR400x Final Edition But this time, I made the short tube like Hand Bent to be installed with FXSpec It was It's inexpensive, it sounds great, and it's a perfect score! View detail
Low price but not cheap
OEM NINJA2 Helmet 50R with Handlebar Set I wore this one because the shape is different from the Product It's the type that expands and stays in place, but it also comes with Firmly It was not cheap for the price View detail
Good!
I bought the cream color The color is just as it looks in the picture
The LEDs light up quite brightly
The squeal is not pig-like
There is no BALIetc. in the Body
Mounting Bracket (tail part of the ring) is weak, and the ring will be removed after two days of use The pig body dropped out of the Pig Body from the Recommendation to reinforce or replace it with another Bracket
View detail
Fits: SUZUKI Universal, SUZUKI Universal
Improved look and feel
I bought it for my GSX1400 and the appearance around the tank cap has changed
I wasn't expecting it because it was easy to get a Gold amount, but it felt good
All you have to do is stick it on with double-sided tape, so it's easy to finish
Repeatedly a good product
View detail
It's perfect!
I was able to install it to NS-1 Visibility is good, and it is very good for CBR1000 style parenthesis
It is a bit of a concern for the texture of the resin, but considering the price, this is a very good value for money It was
View detail
Good, cheap stuff
You can change the Grip in the address as well
The Supper Grip was the first thing I replaced on my CB223S
It's inexpensive, but feels good and is surprisingly durable
I like Large strange, so I'm Repeat
In order to renew the area around the handlebar this time, the color is close to the color of Seat
Color selected
As I attached it to a red handlebar, it had some effect on the color of the ground
View detail
Fits: KAWASAKI Z750FX, KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z2 (750RS/Z750FOUR), KAWASAKI Z1, KAWASAKI Z1000 MkII
Large I like it
Since the meter cover was dented and corroded due to ageing, I had to use the lower I considered buying it to change the cover at least While there are various reproductions, I purchased the one made by MADMAX, which has a high review rate and is cheap The packaging is also firm, and I am satisfied with the texture of OEM parts and the same etc However, only the lower cover has been renewed, so the oldness of MeterBody stands out this time I've done it (+_+) But new is still good View detail
Easy to install and satisfactory
It's cooler and better made than NORMAL
The details are well done
I have no complaints about the functionality and the ease of operation
Foldable is also a nice touch
View detail
Mostly successful
I was looking for something simple
Weight is light and has no resonance prevention function
Hexagonal Wrenches are included, so you can replace them without having to bring them with you
View detail
Good
I use it for repair my wire connection. The original one is old and rush already. So I change it . And then everything work after I change it. Good View detail
Fits: KAWASAKI ESTRELLA [Estrella]., KAWASAKI W400, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI W650, KAWASAKI ESTRELLA [Estrella]., KAWASAKI W400, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI W650
It was very easy to put on
The blinker on BALIUS2 broke and I installed it!
It was very easy to install because it was the same shape as the OEM, and it's still in use, no problem!
View detail
High quality at a low price!
I wasn't expecting it to be $270, but it was better than I expected!
It's Carbon Style and looks good looking The adhesive surface wasn't bad either
I recommend it!
View detail
I was pleased with the OEMParts!
What made you decide to buy?
It's a Universal Product and the price is Reasonable
When I was having trouble painting my OEM Front Fender by myself and it was dripping, this product I found and bought it immediately
How was your experience with it?
When I installed it, it looks like OEMParts and doesn't look different The strength also seemed to be fine
It's stylish with a BEET look and mesh on the sides
[Was there anything that disappointed you?
Not particularly
Do you have any wishes or improvements you would like to make for the Manufacturer? I have no complaints
[Do you have any products to compare it to?
I found the same thing on other NetShopping, but Webike was the cheapest for the price I think
View detail
cowl
Hello! I am very grateful to you for the order !!! I really liked the fairing and the order came very quickly in time !!! Hello! I am very grateful to you for the order !!! I really liked the fairing and the order came very quickly !!! translated by Google Translator View detail