Reviews
Satisfied with the appearance! Good cosmetics!
I am satisfied with the appearance!
The grip and quality feel as good as the price.
I am satisfied with the product because I purchased it for its appearance!
View detail
I am satisfied with Cool! It is a little blurry, but it is acceptable!
Great cost performance! It looks cool and I am satisfied!
There is some blurring, but it is acceptable.
It is easy for anyone with tools to install it, as it is simply attached with Screw!
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Vulcan 800, KAWASAKI Vulcan 400, KAWASAKI Vulcan 1500, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI ZRX400II, KAWASAKI VULCAN400 Classic, KAWASAKI Vulcan 800, KAWASAKI Vulcan 400, KAWASAKI Vulcan 1500, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 1100, KAWASAKI ZRX400II
Almost the same design as OEM!
The design is almost the same as OEM, so I am satisfied! View detail
MADMAX Blinker
Purchased for Honda Little Cub. There are questions about the quality of workmanship, short wires. Didn't like the interior design. In the end, I assembled something in between the old kit and the new one. If it is impossible to purchase original turns, you can take it, the price is adequate. -------------------------------------------------- -------- Bought for Honda Little Cub. In terms of manufacturing, there are questions, short wires. I did not like the internal design. In the end, he collected something average from the old set and new. If it is impossible to purchase original turns, you can take, the price is adequate. Powered by Google Translator View detail
Essential for long journeys!
We also used it for the Japan round trip.
I bought it anyway because it was cheap and I didn't have high expectations, but it is a great cosmetic product and my hands don't hurt at all!
It is simple to use, and I think it will be an easy companion for your first trip.
However, it is a minus point that it interferes with slight arm movements and slightly alienates normal movements.
But it's cheap, so when you travel, 1pc. or Quantity:2pc. Set is definitely a good thing to have.
View detail
Fits: HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS(BWS), HONDA MONKEY, HONDA LEAD 50, HONDA LIVE DIOZX, HONDA FUSION, HONDA MAGNA 50, HONDA HORNET250, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA(MF08)
disappointed
I searched for parts from the car model on our site and purchased them, but could not install them. Crying I thought I could install it without any modification since I searched for parts by car model, but I am disappointed... View detail
Screen bolt
I think it looks good.
However, the Black paint was bald when I installed it, so I fixed it with Touch pan.
View detail
It changes the appearance considerably.
The change to plating has changed the look of the product to be reminiscent of ZEPHYR.
It clearly gives a sense of luxury.
However, it seems that Plating may not be able to receive the ETC signal unless the ETC receiver inside the meter is relocated, and the instruction manual says to do so, so I installed the receiver in the bracket of my KaEdia.
View detail
Fits: SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, HONDA ZOOMER(Ruckus), SUZUKI STREET MAGIC, SUZUKI SKYWAVE250 burgman, SUZUKI DJEBEL250 XC, SUZUKI DF200 DJEBEL, SUZUKI GRASS TRACKER Big Boy, SUZUKI GSX400, SUZUKI GRASS TRACKER, SUZUKI TS200R, SUZUKI INAZUMA400, SUZUKI TS125 HUSTLER, SUZUKI TEMPTER, SUZUKI ST250 E Type
Cosmo!
I bought it immediately because of its affordable price.
The grip was also nice!
View detail
Fits: HONDA Super Cub 50, HONDA Super Cub 70, HONDA Super Cub 90
Cannot be installed on AA-09
No way to get a OEM Bracket that can't be installed, because it won't even stick.
Just make sure you present the information correctly.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90
Looks good!!!
It looks great!
The only regret is that the hinges have to be modified a bit and that they interfere a bit when the seat is raised! Well, I will redo it again because I just need to modify it a little more...
View detail
No problems with dimensions! No minor scratches!
I was concerned about the texture of the Plating, but it was very good.
Installation went without a hitch.
It is a Recommendation because the Plating Process for an OEM Meter cover is quite expensive in Gold.
ETCAntennas are installed in the meter cover as a precaution.
Setting the Meter cover to Plating may prevent proper reception of radio waves. Please be careful.
View detail
Pimping on SUPER CUBDX.
It can be used on SUPER CUBDX without any problem.
I feel like Headlight has been cleaned up and even the whole thing has been cleaned up.?
View detail
The product was solid and well-priced.
It is a bar end designed like a thicker version of the OffSpec. Swivel type, and can be easily installed in one shot with a fixed use installation.
Anodized Treatment and color were both beautiful Type for the price.
The length and diameter of the bar end is wide enough to be used on off-road vehicles, and the length and diameter of the bar end are exactingly designed for the Z.
The construction is also well processed, so it is likely to function well in an emergency situation.
Weight is Quantity:Pair (for Left and Right) The vibration isolation effect is not so great since it is only about 150 Grams with the Mukawa aluminum handlebar, but even with the Mukawa aluminum handlebar, vibration is not an issue.
It was a good choice with no problems after installation.
View detail
Variation is available in the shape of the back
The shape of the reverse side zaguri was different.
It seems that the Z900RS is very different from year to year.
Please look at the pictures to determine the shape before purchasing.
View detail
gaudy
It looks a little cheap. It has a dress-up effect in its own way, but the plastic model looks like a plastic model for the price, so there may be differences in likes and dislikes. View detail
might be a good idea
Product Name
MADMAX MADMAX Throttle assist
Item Number
MM05-0116B
Vehicles
Grom (JC61)
Number of man-hours
Around 10 hours
Required Tools
Driver and pliers
Why did you choose this product?
We chose it because of its low price and some strength.
Was the one you received as per Image?
It was just as shown in the Image. Smaller than expected.
Was the installation difficult?
It's easy, just fit it in. Be careful not to miss.
How was your experience with it?
The benefits are obvious:Axel can be found in unexpected places.
[Included Parts:were they on?
No
[Was there anything that disappointed you?
None in particular
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA foresight, KAWASAKI Z250LTD, KAWASAKI Z250FT, KAWASAKI KSR-2, SUZUKI DR250S, SUZUKI DF200, YAMAHA ZEAL, HONDA ZOOMER(Ruckus), YAMAHA BJ, YAMAHA DT125R, YAMAHA BWS(BWS), HONDA MONKEY, HONDA LEAD 50, HONDA LIVE DIOZX, HONDA FUSION, HONDA MAGNA 50, HONDA HORNET250, HONDA BROS400, HONDA FORZA(MF10), HONDA FORZA(MF08)
Not available
It was designed for BANDIT250v, but in fact it is short and not a penetrating type.
It was useless.
View detail
Quantity:1 Set of 2pcs. with great cost performance
Quantity in Z2 SERIES:The price for 2pcs is probably the cheapest and the most cost-effective. The traditional style fits perfectly with old NAKED cars, and the Communal to Left/Right design allows you to have a spare in case of breakage. The round mirror makes visibility straightforward and easy to see, and the angle adjustment of the mirror surface only ensures that the view does not shift even if you touch the chassis. View detail
I am Garbage.
I was expecting it to be dedicated to Bullet Type Terminal, but this is Garbage.
The Wiring and Clothing sections can only be Crimped at the same time in one time, so the positioning is very severe.
Even so, the Crimp section is so thick that it is almost impossible to see where the Wiring is located.
Even when it was finally done, the crimped shape was flat and uneven.
A Caulking Tool, which costs less than 1,000 yen, will give a cleaner and more reliable finish.
I used it a few times the day it arrived and it went to the Garbage bin.
View detail