Reviews
Fits: KAWASAKI BALIUS2, KAWASAKI ZEPHYR750 RS, KAWASAKI BALIUS, KAWASAKI ZEPHYR400, KAWASAKI Zephyr 400, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750RS
This cover replaces the original cover, and screws into the the original slot, using the stock bolt. It is a very good plastic reproduction of the original chromed alloy parts. The look is very similar to a brand new metal lower cover. However, sinc
This cover replaces the original cover, and screws into the the original slot, using the stock bolt. It is a very good plastic reproduction of the original chromed alloy parts. The look is very similar to a brand new metal lower cover. However, since this cover is made of plastic, extra care is needed in cleaning, because it is not as durable as the original metal part. Always clean with damp/wet towel (or completely wet-wash the whole bike. Never clean with dry towel, especially if a lot of dust and/or other dirt is on the surface. Recommended to freshen up the look of the bike, as it is cheap enough to be used on an everyday bike. Cheap to replace if scratched/damaged View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI barios, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS
These upper cover slides over your existing original cover. So there is no need to destroy the old cover, and create a leak that leads to foggy meters. Installation is very simple and straightforward. I added a few strips of thin doubletape to secure t
These upper cover slides over your existing original cover. So there is no need to destroy the old cover, and create a leak that leads to foggy meters. Installation is very simple and straightforward. I added a few strips of thin doubletape to secure them the only downside is the fact that they are made of plastic which is easier to scratch or damaged compared to metal original cover (but those are rusted on my bike) View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr X, KAWASAKI ZRX400II, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr X, KAWASAKI ZRX400II, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS
Looks exactly like the original The only difference is it is made of plastic. Finish is great, just make sure to use soft cloth to clran
Looks exactly like the original The only difference is it is made of plastic. Finish is great, just make sure to use soft cloth to clran View detail
STAND became easier to put out.
I decided to purchase because OEMParts was cheap and difficult to put out rather than for Dress-up. Although it is a slightly flashy product, I may have matched the car body because I installed a lot of Optional parts. It is a solid making, but the welded part felt somewhat sloppy. Since there was a possibility of knocking down the car body without installation, there was a possibility of knocking down the car body, so we completed installation in a short time, but because it is a shape that does not firmly adhere to the ground surface, unlike "OEM Product, Grassy etc etc. Please be careful when parking in.
I was told that it is a passing point Total.
View detail
It is a collaboration between Mad Max and KITACO
Previously, if you attempted to install a similar garishishu, you can not install it with the included Double-sided Tape, and it got flying while driving with a glue. As a result, since the part to be attached was full of scratches, I tried to add a garnish again and purchased it. I was lonely open so I cut and pasted KITACO's Mesh garnish with Glue gun from behind.
Adhesion with Body was done with 2 mm thickness of Emon's Double-sided Tape for Aeroparts. I think that it will not come off this time.
View detail
Fits: HONDA CBR600RR, HONDA CBR250R (MC17/19), SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, SUZUKI GSR250, HONDA CBR250RR (MC22), SUZUKI GSX1300R Hayabusa, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1100, HONDA CB1300 Super Four, SUZUKI BANDIT1250S
Good Titanium color
NORMAL was thick and replaced by Shibui.
It is exchanging other than Spring by removing NORMAL. Because there are holes in some places Position can be changed subtly? I made it to the position as it is. After all it is better than with Rubber Parenthesis is good. Oh yeah, there is no manual but Split Pin is Quantity : 2pc. Set comes with. I did not look inside the box well I reused it (-_-;)
View detail
Fits: HONDA CB1300SF, HONDA CBR1000RR, HONDA CBR600RR, HONDA VTR250, HONDA CBR954RR
As a result it was installed but the strength?
The appearance is the same as OEM Product, but because Screw locking boss is 90-degrees gap with OEM Product, it can not be installed as it is.
Because it is a non-refundable item, I cut a part of the boss with Cutter and installed it. I can not recommend it for those who wish to add a pump.
Us usual year year CB1300SB, but SF / Please note that ST also has the same OEM Parts Number number.
View detail
Fits: KAWASAKI GPZ600R, KAWASAKI Z250FT, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI GPZ250, KAWASAKI GPZ250R, KAWASAKI GPZ400, KAWASAKI GPZ400R, KAWASAKI GPz400F/F2, KAWASAKI KLE250 Anaero, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZR-7/S, KAWASAKI ZX-4, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI Eliminator 250, KAWASAKI Eliminator 250LX, KAWASAKI Eliminator 250SE
About exchange system
I exchanged the Exhaust System but I was riding without changing Gasket.
After all, there is exhaust leakage .... Torque is gone. Should have changed.
Everyone is obvious, but please change. The basic is Large thing.
View detail
Fits: KAWASAKI GPZ600R, KAWASAKI Z250FT, KAWASAKI Eliminator 400, KAWASAKI Eliminator 400, KAWASAKI GPZ250, KAWASAKI GPZ250R, KAWASAKI GPZ400, KAWASAKI GPZ400R, KAWASAKI GPz400F/F2, KAWASAKI KLE250 Anaero, KAWASAKI Z400FX/Z400J, KAWASAKI Z400GP, KAWASAKI ZR-7/S, KAWASAKI ZX-4, KAWASAKI ZXR400, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI Eliminator 250, KAWASAKI Eliminator 250LX, KAWASAKI Eliminator 250SE
Exhaust System exchange
When exchanging the Exhaust System this time, I exchanged Gasket. There was also a liquid Gasket painted in it.
Previously, since there was no Gasket at the time of exchanging the Exhaust System, I used a crushed guy, but I realized that I still have to change it.
View detail
It's better than nothing..
Even in the middle of winter, with this and Winter Gloves only managed. Somewhat might be the effect of Winter Gloves ^ _ ^;
Installation is almost pon attachment.
View detail
Cheaper than made by DAYTONA
Originally, I had made DAYTONA made, but I bought it because only one side was broken with standing gobble. VisorBody and Mounting Bracket are the same as those made by DAYTONA. I hope I can attach it, but if some position adjustment is necessary at the time of installation, a thick Bolt fixed to the Color and Mirror Holder which adjusts the installation height of Visor is not included.
You can do something with ingenuity in this missing Color or Bolt (Purchased at Home center) People think that this product is cheaper and more friendly to Wallet.
View detail
The look is cool!
I bought it to give Seal protection as much as possible and to emphasize the appearance when OH is brought to Fork.
Fork Boots is Off car richness, ◎ is both atmosphere and performance.
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
To ZX-6R
I bought it for protection of Tank cap.
Seal has thickness and size is perfect.
It is necessary to paste so that the size is perfect for Gap, but I was able to stick it cleanly.
View detail
It worked well..
Added to the new ADDRESS 110.
Because it is not an OEM product, there are some gaps
It was nice to have a good fit.
I have not run yet so I do not know the installation effect
If you are looking for more insulation effect than this you only have Handlebar Cover.
View detail
Feeling cheap and not bad!
I installed it in the chopper-style CUB.
I chose Design just because I was good with Parenthesis.
The price is also cheap, I think that this design can be used at all.
It is only Rubber's durability to worry!
View detail
Excessive expectations are prohibited
Winter in RSThailand Chi's Winter Gloves "RST 598" However, in the case without Knuckle visor, when the outside temperature falls below 10 ° C, the fingers are quite chilly as expected.
This Knuckle visor that I bought this time has no Impression of User and it was not able to compare with other products, but since the price goes into a cheap price category considerably, I purchased it for trial. Impression of other famous Manufacturer's other products, Body is thin and it is baPePera, and on the highway it is distorted by wind pressure, but this product has a fairly firm thickness, so there is no sense of ba LePera at all.
Also, since it was ClearColor, changes in appearance can be kept to the Small limit.
I installed it at SR 400 and just tighten it to Molror Bracket's Bolt so anyone can easily install it. The necessary tool is OK only with 17 mm Wrench.
Although it is the key effect, from the conclusion, the coldness of the fingertip is not resolved.
It does not protect the space itself around Handlebar like the Handlebar Cover from outside air, it can only avoid direct hit of running wind. Since the outside temperature of 5 ° C does not rise to only 10 ° C around Handlebar, it is natural that it is natural.
I already use Winter Gloves with strong wind protection, so I think that the effect feels weak.
As a test, I tried it with Gloves which is not very windproof for spring and autumn, I can not bear it for 30 minutes without Knuckle visor, but with Visor, it is cold for cold, but over certain I did not get cold.
In other words, I think that the windbreak effect of this product is fairly solid.
Gloves to be used in winter, even if it keeps even the heat retention effect firmly, even if there is not so windproof performance, I think that if you use this product, even single temperature temperature will be enough to pass.
View detail
It is not much different from OEM
It looks almost the same.
Personally I think that Lens is almost same both at OEM and outside the company.
I think that COSPA is cheaper than OEM.
View detail
I received the goods very quickly. Product matches the description 100%. the product quality is very good. packaging carefully. all together and works well.
I received the goods very quickly. Product matches the description 100%. the product quality is very good. packaging carefully. all together and works well. View detail
Attach to cb 400 sb
As Tank Pad is Carbon, I was looking for it, so I was just looking for it, and I ordered it cheaply. I am satisfied because the texture was good for the price. As for durability, I would like to observe from now on. I feel even more satisfied that Tank has a unified feeling and finished in a good feeling.
View detail
Is the material too hard?
After installation I went to the mountain at once and broke with the first fall. It is disappointing that it becomes useless at one time for price. Also, if you do not have an installation Instruction Manual, the person who installs it for the first time thinks it is the Large degree of change. I am sorry about the product and installation as well. I can not recommend as us.
View detail