Reviews
Slightly longer short lever, detail workmanship is CP◎.
■About the sense of Size
This is a little bit more like the SPEEDRA (SSK) Lever, but this one is a little bit larger and the lever angle is more forward.
■Detailing
It is easy to use without Wobble. The adjustment Dial is somewhat rigid and less prone to misoperation.
■ Design
I don't know the OEM as it came with the car from the beginning when it was delivered, but the Red color is quite noticeable metallic red, although I guess people have their own preferences.
■Operability
I have large hands, so when I operate Clutch with two fingers, it is quite likely to hit my ring finger. However, if I move the lever far away in Dial, it is difficult to operate the lever, so I think this is an issue with the angle of the lever.
General Comment
I think the most attractive point of this product is its price. The cheap price does not mean that it is poorly made, so I think the cost performance is very good. However, I think that you should choose the right parts for your hands for this kind of operation system.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
You can easily ime-Chain!
This was my first non-OEM replacement for Lever and I was able to install it without difficulty
Brake levers are really pompous It takes only 3 minutes
Clutch is a bit fiddly with the Wire adjustment, but it's not difficult
A FingerTight is sufficient for adjustment Screw If you close it down, the Clutch meat position should be closer Try it
As others have said, the angle R is so tight that it may indeed hurt your fingers
I think most people ride with gloves, but you should consider the strain on your fingers
The grip feels like a Short lever and is a Small spooky Touch It looks and rides like a sporty image!
View detail
CBR400R (NC47) Used in '13
Originally CBR 250R (MC41) However, OEMLever's ProductNo was the same as 400, so I thought that I could probably install it and purchased it.
I was able to attach it actually. However, the play went Large. I feel rattling up and down.
It is GOOD that HONDALOGO is included in the end part. However, in a grip portion certainly "CBR250R" As it is written, it may be good to shave there only w
If it's FashionCustom, I think this is fine, but if you want to get stingy performance it might be better for U-KANAYA.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Attachment could also be simplified and it is satisfied also with appearance of attachment enough.
Attachment could also be simplified and it is satisfied also with appearance of attachment enough. View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Since something was a cheap Lever [ やたら / as a Lever with an Adjust ], it purchases to a trial. Although felt like not matching well in character, it attached to the ZEPHYR750. The beam touch with and processing accuracy have attached easi
Since something was a cheap Lever [ やたら / as a Lever with an Adjust ], it purchases to a trial.
Although felt like not matching well in
character, it attached to the ZEPHYR750.
The beam touch with
and processing accuracy have attached easily so bad.
a motion of
Adjust part is also satisfactory, and since there is also thickness of a Lever so so, it is satisfactory at all on use -- it is .
A not much expensive Lever is a Lever which ... and those which it hesitates can recommend to you.
However, it is not necessarily large satisfaction.
Although it says that it is dissatisfied or is touch as this is regrettable, a METAL and a Bearing have no portion which becomes an axis first.
The Miniature Bearing is contained in case of an expensive Lever.
Although not expected, I wanted you to put in a true 鍮 METAL up to there, since it is a cheap Lever truly.
Next.
If it falls, it will be モゲ る from the Lever origin.
In order to usually avoid a Lever total loss in an emergency, the cut is contained so that it may become weak purposely in the direction of a tip, but there is no it.
I wanted you to put this in.
The 3rd is a color.
I all wanted black.
Although only the
Adjust lever is a red Anodized, does it float depending on the character of a Motorcycle?
Main Motorcycle was also putting in the Short lever, and since the Two Finger was established, both hands were that there is considerably nothing comfortable [ operation ].
Probably, they are inexpensive goods enough, if it is this quality in this price range.
Is it unsuitable for the direction which asks for
engine performance?
やっぱ.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good to
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good touch. View detail