Reviews
Can be assembled without modification
It can be installed without any modification and does not have the same thickness as the ones sold on Amazon.com, etc.
Only one for Rear had a defective Screw Mt.
It would be better to check the number of In and Out and screw Nipple before starting the incorporation.
View detail
Focus on practicality
Spoke Wrap is attached so that the position of the Air Valve can be seen at a glance. We are satisfied with the number of Spoke Wraps as 10 are sufficient for the front and rear. View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI 1400GTR, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR600, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Ninja 250R, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZRX400II, KAWASAKI ZRX400
Good with a pomp, OEM-like look and feel.
I put it on my A7. The rubber of the original footpeg was hard and slippery, and the gold part was badly corroded and dirty, so I decided to replace it with Other Brand Product.
It looks similar to the OEM A12 and later and doesn't look out of place when installed.
The installation was completely pontoon and no processing was required.
I went on a 1000km touring trip after installation and it was comfortable. I have no problem with the function.
The price is less than half of OEM, it arrived quickly, and I am very happy with Large.
I highly recommend it to everyone.
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR550, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z250 (2013-)
Large strange satisfaction as Main Footpeg
It is much less slippery and easier to operate than the OEM Rubberfootpeg.
The quality is also appropriate for the price, but there is no problem without BALIetc.
Because the footpeg position can also be changed several steps, the person who does not need it to Rear Sets
I think it's inexpensive and a good value.
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI 1400GTR, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR600, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Ninja 250R, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZRX400II, KAWASAKI ZRX400
Cospa is enough
I was able to install it without any problems. It was fully compatible with the GPZ900R-A7's Normal step. The spring that came with it was Exactly, but the pin was too long, so I used the Normal spring. View detail
Fits: KAWASAKI Ninja 250SL, KAWASAKI Ninja 250, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr X, KAWASAKI Zephyr 1100, KAWASAKI Z250 (2013-), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R
Satisfied with the quality and price
I bought it for the ninja1000SX 2020.
The OEM with Rubber does not have to transmit vibration.
I bought it because it is too heavy and the bottom of Boots and the Rubber catches too much on each other.
The mounting position of the footpegs can be adjusted so that the space between the footpegs and the Lever is widened, so the feet can be straightened
You can now put it down.
I chose the Black color to be consistent with the OEM, but the Matte color and the Glossy color are
It still leaves me feeling uncomfortable.
Installation took a little bit of work to remove the Split Pin, but it only took about 5 minutes to complete.
The attached Split Pinetc. will be kept as a spare part, never to be used.
I don't know how long Anodized paint will last, but the price is low enough for me to be happy with it.
View detail
Fits: KAWASAKI Ninja 250SL, KAWASAKI Ninja 250, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr X, KAWASAKI Zephyr 1100, KAWASAKI Z250 (2013-), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R
Some say it's a cheap shot of a certain toner (Lol) 。
As a person who wears racing boots even when touring, I'm not a fan of
Pedal is far from subtle in both Z250SL OEM footpegs.
I've been wanting to do this before, just for a minute.
I found this one and snapped it up immediately.
Not to mention the ease of replacement.
It is the Large size that can be changed freely to the desired position.
Best of all, it's made by Gold genus, so it's more sturdy than OEM!
View detail
It's a good co-spa and kills two birds with one stone!
The front and rear spokes of the XLR250R were quite rusty, so I had to remove the rust and then the anti rust I applied Engine oil on it with the meaning of "Engine oil" and used Spoke Wrap to hide rust and dress-up Installed
It's truly killing two birds with one stone!
The point is to apply a small amount of oil to Spoke and cut the tip of the back crack into a V shape Enter Smooth
View detail
Madmax foot pedal cover
The Madmax foot pedal cover is an awesome addition to a cool bike! I get more comments about it than I expected. It is a littl bit heavy, but it fits great and gives more area on the brake pedal for your foot View detail
Fits: HONDA CB400SF, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
cheap
I used it to retract the footpeg position, but I am satisfied because it was attached without processing
I chose Silver for the color, but I think that I made a good choice because the scratches on standing were not noticeable
View detail
Fits: KAWASAKI NINJA2 Helmet50RSL, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZRX1200R, KAWASAKI ZRX1200S, KAWASAKI ZEPHYR400, KAWASAKI ZEPHYR550, KAWASAKI ZEPHYR750, KAWASAKI ZEPHYR1100, KAWASAKI ZEPHYRX, KAWASAKI ZEPHYR1100 RS, KAWASAKI ZEPHYR750 RS, KAWASAKI NINJA1000 (Z1000SX), KAWASAKI NINJA250R, KAWASAKI Z250 (2013-)
Good vibes
Attached to ninja 250sl.
Large satisfied with changing from pure Rubberfootpeg!
I can change delicately and height! I'm happy.
However
Wow, it was cut down shortly after bought!
But I do not care because it is originally cheap ...
Do not know the use of Plate with two holes opened. I wonder what that board ...
Oh, you can arrive so that the root curve is Up. Because there is no Instruction Manual
* When pushing Spring at the time of wearing, scratches on the base side may be better ... It might be better to patch the cloth.
I was indifferent because I am an amateur (regret)
View detail
Fits: KAWASAKI Ninja 250SL, KAWASAKI Ninja 250, KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R, KAWASAKI ZZR1400 (ZX-14), KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 1100RS, KAWASAKI Zephyr X, KAWASAKI Zephyr 1100, KAWASAKI Z250 (2013-), KAWASAKI Ninja 1000 (Z1000SX), KAWASAKI Zephyr 750, KAWASAKI Zephyr 550, KAWASAKI Zephyr 400, KAWASAKI ZRX1200S, KAWASAKI ZRX1200R
very good
Excellent for COSPA. At this price you can not buy at other Manufacturer. The appearance changes at once. Instructions are not included, but installation is easy as it is the OEM street. View detail
Fits: HONDA CBR600RR, HONDA CBR250R (MC17/19), SUZUKI GSX-R750, SUZUKI GSX-R600, SUZUKI GSX-R1000, SUZUKI GSR600, SUZUKI GSR400, SUZUKI GSR250, HONDA CBR250RR (MC22), SUZUKI GSX1300R Hayabusa, HONDA CB400 SUPER FOUR, HONDA CB400 SUPER FOUR, HONDA CB1000 SUPER FOUR (Big One), HONDA CB400 SUPER BOL D'OR, HONDA CB400 SUPER FOUR, HONDA CB1300 Super Four, HONDA CB1300 SUPER BOL D'OR, HONDA CB1100, HONDA CB1300 Super Four, SUZUKI BANDIT1250S
Good as a product at this price
I stole it and folded footpeg and bought it.. Even amateurs themselves could install them relatively easily. Split Pin is also attached.. It is good without rattling. The position of footpeg can also be changed to your preferred position if there is Hexagon Nut. With this amount of gold, the atmosphere changed and I'm satisfied with Large. Manual etc.. Because there is absolutely nothing.
View detail
Fits: KAWASAKI Zephyr 400, KAWASAKI 1400GTR, KAWASAKI ZZR1400 (ZX-14), KAWASAKI ZZR600, KAWASAKI Zephyr 1100, KAWASAKI Zephyr 1100RS, KAWASAKI Ninja 250R, KAWASAKI Varios 2, KAWASAKI barios, KAWASAKI Zephyr X, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 750, KAWASAKI ZZR400, KAWASAKI ZZR250, KAWASAKI ZZR1200, KAWASAKI ZZR1100/ZX-11, KAWASAKI ZX-9R, KAWASAKI ZX-12R, KAWASAKI ZRX400II, KAWASAKI ZRX400
since the Step of the Front was tattering with the old car body -- the object for exchange -- it purchased. A new article is good too. Smile Since it grips firmly, it is large satisfaction.
since the Step of the Front was tattering with the old car body -- the object for
exchange -- it purchased.
A new article is good too. Smile
Since it grips firmly, it is large satisfaction.
View detail