Reviews
Some protection for shoes
I use it on my Off-Road and Dual PurPass vehicles, not necessary when wearing Off-RoadBoots, but I think it's better to have it when riding with Sneakers. It is inexpensive and easy to install, just spray some Parts Cleaner and it goes right in! View detail
OEM style Footpeg for Yamaha that can be replaced on the cheap.
I replaced the soft, airy footrest of the Yamaha MT-01 with this SolidRubber one.
However, as shown in the note, when the Pin is Crimp, it is necessary to remove and replace it by shaving off, and the processing had to be done. It is necessary to think whether it is possible to exchange only the Footpeg only by removing the installation of the Pin before buying it, and whether there is a necessity to attach it until doing so when processing is necessary.
This product itself does not have a particularly superior finish compared to the OEMs, and it seems to be a product that was designed for cost performance in repair.
The Rubber of OEM style is stretched, but only the Rubber can not be replaced. When it decreases, it becomes the exchange of the whole Footpeg.
If you like solid rubber, it is worth to change. If you like solid rubber, it is worth to change.
It is classified as a Universal Product, so in that sense, you need to think about how you will use it on your motorcycle before you buy it.
View detail
If the color is different from Shift PedalBracket, it might look cheap.
[How is it used?
I use the Rubber part of the Shift lever over the Lever itself.
Was the installation difficult?
It's super easy to just cover it up.
How was your experience with it?
It certainly seems to make it harder to get marks on the ShiftRubber part of Boots and shoes.
[Was there anything that disappointed you?
I bought and installed it for the purpose of customization, but the customization is spoiled. I bought and installed it for the purpose of customization, but it spoils the custom. Also, the water drainage hole is open in the center of the side, but the water does not seem to come out from there.
View detail
Fits: HONDA CB400SF, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
For a change.
Purchased for a change of pace, PetitDress-up.
The price is not so high, and it is thought that cosmetics are good.
I used it for about a year, but I don't think it's particularly slippery, so it's easy to use.
One problem is that it can be attached to the HORNET, but the size of the base is a little different from the OEM, so the spring part interferes with the body, and when the footpeg is folded, the interfering part of the body is shaved off.
It's only a little, and it's not visible, so if you don't mind, I'll give you a recommendation!
View detail
Fits: HONDA CB400SF, HONDA CB1000 SF (Big One), HONDA CB1100, HONDA CB1300 SF, HONDA CB1300 SF, HONDA CB1300SUPER BOLDOR, HONDA CB400FOUR (water-cooled), HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SF, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR, HONDA CB400SUPER BOLDOR
Position
Because the Position of Normalfootpeg is not good, comparatively cheap, I bought this.
Installation was easy and took about 30 minutes.
There is no sticking and it's nice.
I had to tear it apart a few times to determine the Position, but I liked that it only took a few minutes.
By the way, the color is Titanium.
View detail
Fits: YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA MT01, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA BT1100, YAMAHA YZF-R25, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R, YAMAHA XJR1200, YAMAHA XJ400S conversion, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA MT-25, YAMAHA MT-09, YAMAHA MT-03, YAMAHA FZS1000 Phaser, YAMAHA FZ400
We do not recommend installing it on the MT25.
I installed it on a 2016 MT25. The installation itself can be done without any problems, but it is much longer than the OEM footpegs and harder to ride. In addition, the installation part protrudes outward and you have to make your foot in the shape of the letter "H" to be able to Shift change or Brake. View detail
Fits: YAMAHA MT01, YAMAHA FZ6 FAZER, YAMAHA FZ6, YAMAHA BT1100, YAMAHA YZF-R6, YAMAHA YZF-R1, YAMAHA XJR1200, YAMAHA TZR50R, YAMAHA TZM50R, YAMAHA MT-25, YAMAHA MT-09, YAMAHA MT-03, YAMAHA FZS1000 Phaser, YAMAHA XJ400S conversion, YAMAHA FZ400, YAMAHA YZF-R25, YAMAHA XJR400R, YAMAHA XJR400, YAMAHA XJR1300, YAMAHA XJR1200R
This is a product that needs to be processed.
I bought one for Yamaha, but first of all, it cannot be installed as is. Because the shape is obviously different, YZF-R6 needed to be shaved. Also, the attached pin is not long enough. It looks pretty good, but it's impossible to install in the first place, unless you modify it, let alone pimp it out. . We-Big's Site has a 'It may be a process of explanation,' etc., but you will need to process and prepare a pin separately. View detail
Try using it for 1 year
【What made you decide the purchase?】 There is only this in the old car.
【How was it actually used?】 Large kimono is also Just fit.
【Was it difficult to install? (Hard parts case)】 There is a need to remove Fork.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Any
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】Any
[Is there anything I was disappointed about?] I think that things I bought before were much thicker. Although I faded, although I did not enter one crack even if I used it for 3 years, the product of this time has been torn from the air vent hole in one year.
Three holes out of the four open holes that have torn the hole. Is not the quality declining?. Before breaking completely, I'm thinking of reinforcing with Tie Wrap or Hose Band.
【Hope for Manufacturer - Please tell me if there are any improvement points】 This Boots was the third purchase this time. I am a repeater, but I hope to maintain and improve the quality.
【Have you compared items?】 OEM
[Others] Any
View detail
To prevent shoes Sauce
If it is not Riding shoes, Change Pedal operation will do quite a lot of shoes.
I will substitute somewhat for Cushion with this.
It was possible to install in most Motorcycle.
However, Rubber was not very strong, and I was able to break it quickly.
View detail