Reviews
It's not just the processing of some of the...
To be honest, it was difficult to install; OEM Valve Cover (1 Set of 2pcs.) The "H" was not able to fit in the bag, so I removed it and used it. The description said that it is waterproof, so I just use it as long as I am careful with water from the front cowl rather than water from the rain.
So far it is working fine.
I think the difficulty in adjusting the optical axis and the fact that the lens is not as bright as the Package can be discounted in terms of price.
I also have a spare Halogen, so at worst I can put it back together....
If you are looking for perfection, please make sure to ask a PRO person for help, and if you are thinking of installing it yourself, you should be prepared for a certain amount of forgiveness. The product cosmetically is good.
View detail
Mini Blinker
It would have been better if the Bracket part was flexible and Rubber type. View detail
Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY
Mounting Bracket must be included.
I know you wrote that, but looking at the image, I mistakenly thought that the base was also included. View detail
It got brighter.
Headlight case & Lens (H4 Valve) from Other Brand Product was installed without any modification, only replacement.
Although slightly inferior in Specifications (light output/power consumption) compared to Sphere Light, it is bright enough with low power consumption compared to the high-efficiency H4 Valve.
There is no mention of product life and there seems to be no warranty, but it has been working fine.
It doesn't say anything about Japanese Vehicle Inspection Correspondence, but if it doesn't pass, you can replace it with H4 Valve and pass the inspection.
View detail
Fits: KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2, KAWASAKI Zephyr 750, KAWASAKI Zephyr 400, KAWASAKI ZRX400II, KAWASAKI Zephyr X, KAWASAKI barios, KAWASAKI Varios 2
It was cheap ….
[How is it used?
Purchased as OEM rust was becoming noticeable.
Was the one you received as per Image?
As far as I can see, it looks exactly like OEM Product.
Was the installation difficult?
I thought it would be easy since it was replacing an OEM Product.
How was your experience with it?
Installed in OEM light case but no Fit. Nah.
[Included Parts:were they on?
Included Parts:None
[Was there anything that disappointed you?
I had high expectations because the price was half the price of OEM Product, but the world is not so generous.
If you force it on, you can install it, but there will be a gap.
We will buy back OEM Product sooner or later.
Other items that would be helpful
Installation points and hang/Availability and clarity of the Instruction Manual/Points to consider/Items to purchase/Opinions and requests to the Manufacturer
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB 50, HONDA SUPER CUB 50 (Fi car), HONDA SUPER CUB70, HONDA SUPER CUB 90
Yellowing processing
The yellowish look will fit in A little old CUB. View detail
Blinker Valve replacement behind PS250
One of the beautification plans for the used PS250 is to change the Blinker from Orange color to [Color] I replaced it with Clear. So I had to replace it with Orange bulb, so I bought this one. This Valve is 23w, so it is for the back.
The old-fashioned Motorcycle seems to have been rejuvenated with a transparent and shiningly feel.
The used PS250 was a First Model Type, so it had square eyes. However, I replaced it with two round eyes like the Second Type Model (I had a hard time because the OEM is no longer available for this one). Especially, the frame of the light is not available. I bought one for ZOOMER for overseas). I painted the body like Second Type Model, so it looks young again at once.
I just wonder why the Valve with the Position lamp for the front is cheaper. This Valve in the back is 23w and I would like to see it sold in the $300 range if possible.
View detail
Replaced with Valve here as I had PS250's previous Blinker coverClear
I bought this one because one of my beautification plans for my used PS250 was to stop using the Orange color for the Blinker cover and replace it with Clear, but then I had to replace Valve with Orange. Yes, it's a waste of time. It's a waste that I can't use what I have so far. I could have replaced it with LED Bulb anyway, but then I would have had to replace the Blinker parts (I forgot the name of them). Also, I don't dislike the fact that I can see a little bit of orange color through the transparent cover, and it gives the car a nice, modern look.
However, unlike a moped, the Valve had to be inserted horizontally, so it was somewhat difficult to do. The work was easy and it took only 10 minutes to replace 4 valves.
One thing I wondered is that the front Blinker is 23/8W since it also has a built-in Position lamp, and the back Blinker is 23w, but the front one is less expensive and the back one is more expensive. I would understand if it was the other way around, but why is that?
And previously, Clear cover and Valve were Quantities.:It looks like it was sold as a Set, but it seems to have been discontinued.:I would be more than happy if they were sold at a discount at Set.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
Brightness is very bright
The brightness itself is very bright.
The 400 had to be removed and passed through the inspection because of the inspection.
The light was Rose and Cutline did not appear.
Strangely, under the Light 1m in front is bright.
The second floor of the building was also illuminated, making it impossible to inspect the car.
The brightness itself is quite bright and easy to see.
Since they are H4, they usually illuminate just a little lower than usual, and if you use the High beam more often, you will be less likely to be bothered by other cars.
View detail
Satisfied with this price.
I purchased the Blinker to use LED bulbs when converting my Motorcycle to 12V.
It flashes well and does not look cheap.
I would buy it again even if it breaks.
View detail
The construction is crude, but usable.
[How is it used?
I bought this Blinker of the cheapest CB400fourType because the STD Blinker was Pluschicky and cheap.
Was the one you received as per Image?
It is good that the blinker body is made of gold, but the finish of the plating and the manufacturing itself are cheaper than expected.
Was the installation difficult?
In addition to the blinker, the KIJIMA bracket, HURRICANE grounding wire, and Emon power supply cable were used to extend the cable.
Also, the Lens mounting screws were steel, so we replaced all of them with Stainless Steel ones.
In addition, the Relay and bulbs were replaced since they were also converted to LED.
How was your experience with it?
The light is working without any glitches.
[Included Parts:were they on?
There was nothing else in particular.
[Was there anything that disappointed you?
The plating may be thin, or the finish may be a little rough.
I was torn between the PMC one and the PMC one, but the PMC one is almost twice as expensive and the large size seems to be the smallest, so I decided on this one, which has a more faithful Four feel.
View detail
Very cheap Chinese, but I've never had a defective product.
Purchased for Front position of High ace (Type 4 3000Diesel 4WD DX)
It works normally without any problems.
I actually tried to buy the same Valve I was using before because it was damaged in an accident. "Blue" I mistakenly purchased a White LED by mistake, and it was bright Blue, so I hurriedly repurchased it.
(Blue color for Daylight is legal, but I believe Blue color was illegal as a car width light)
Very nice, and for the price, I bought 6 in total and no defective products!
It's definitely made in China, but it's worked for years with no problems, so this Valve should last a long time.
One thing to note is that Valve has polarity.
If the orientation is wrong, the light will not turn on, but it is impossible to determine the correct orientation from the exterior.
However, it will not be damaged by reverse connection, so it will light up normally if you replace it in the opposite direction
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
I do not recommend it much
The replacement of the Halogen bulb was very easy and took about 5 minutes to install.
However, when actually illuminated, the light was not evenly distributed, making it sparse and very difficult to see.
In the end, we purchased another company's LED Light (DeltaDirect) and are happy with that one, which is cleaner and very easy to see.
Adapter?-like thing got unusually hot, so I'm a little cautious when placing it behind Headlight.
There was some concern about Harness and whether it would melt.
View detail
Fits: SUZUKI Address V100, SUZUKI Address V100, SUZUKI orchid, SUZUKI ADDRESS [address].
Right [ of the optimal and the fitting ] is carried out to a reserve, and it is 縲?
Right [ of the optimal and the fitting ] is carried out to a reserve, and it is 縲? View detail
Fits: SUZUKI Address V100, SUZUKI Address V100, SUZUKI orchid, SUZUKI ADDRESS [address].
Structure is also solid and it has as a reserve.
Structure is also solid and it has as a reserve. View detail
Used for CBR1000RR SC57
Wiring is Limit.
The installation itself is easy.
I was able to find something similar on the web and install it because there was no instruction manual.
I checked it at night, but it illuminates quite a bit in the foreground, so it may not be suitable for driving?
Fashionability is excellent.
I will put it back tomorrow.
A bit of a shame
View detail
Mini Blinker
In fact, the Bracket part is Material:I wanted a Rubber one, but they were hard to find, so I went with this one.
I guess OEM is the only way to go. I could use it for both on and off since it doesn't break when it rubs.
I wonder if the car is Large sturdy enough to be inspected.
View detail
Fits: KAWASAKI , KAWASAKI ER-4n, KAWASAKI NINJA1000, KAWASAKI NINJA250R, KAWASAKI NINJA400R, KAWASAKI ZRX1200DAEG, KAWASAKI ZX-6R
A little Fashion.
There is a sense of tightening.
Fitting is good, no problems.
I'm satisfied
View detail
Mini Blinker
I prefer a hard rubber type for the bracket part rather than plastic.
The product is well made for the price.
View detail
bright
Position bulbs are bright enough to make nighttime driving safer.
Compared to the NORMAL position, the color is whiter and the appearance is more satisfactory.
View detail