Reviews
Durability is difficult
It was installed and working properly, but it broke after a period of one month and a distance of about 200Km.
The symptom is that the blinking speed becomes slower and slower, and eventually the light stops blinking and stays on.
Cheap ones are no good. I should have not been stingy and went with KOSO's Relay, which has a proven track record in other Motorcycle products.
View detail
Repair
It was defective. The bulb rotates around in the correct position and cannot be fixed, and the Socket is too large. The broken OEM Product was replaced with a Rose Socket. View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
Finally, it was not available.
I took the time to disassemble the Light area to remove the exterior, but Material:The Rubber Waterproof Cover could not be attached and I gave up on installing it.
It was a waste of time, effort and Gold.
View detail
Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY
The foundation.
I bought it thinking it would come with it, but it was only CoverLens.
I wish you had Appealed a little more about it not coming with a foundation.
View detail
inoperative
Power Supply Cable and Pulse wire do not work even though they are connected properly.
（I told him that I wanted to know where the Pulse wire was taken out (only the LED light was on), and I told him again, but he has not responded again.
Be careful not to buy cheap!
View detail
Fits: KAWASAKI ZEPHYR400χ, HONDA CB1000SF, HONDA CB1300SF, HONDA CB400SF, HONDA CB400SS, HONDA CB750, HONDA CD50, HONDA CL400, HONDA GB250 CLUBMAN, HONDA JADE, HONDA NS-1, HONDA ST50, HONDA VTR250, HONDA X11, HONDA X4, HONDA APE 100, HONDA APE 50, HONDA GORILLA, HONDA SHADOW400, HONDA CHALY
Mounting Bracket must be included.
I know you wrote that, but looking at the image, I mistakenly thought that the base was also included. View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
I do not recommend it much
The replacement of the Halogen bulb was very easy and took about 5 minutes to install.
However, when actually illuminated, the light was not evenly distributed, making it sparse and very difficult to see.
In the end, we purchased another company's LED Light (DeltaDirect) and are happy with that one, which is cleaner and very easy to see.
Adapter?-like thing got unusually hot, so I'm a little cautious when placing it behind Headlight.
There was some concern about Harness and whether it would melt.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
I can't fix it.
I couldn't fix it, so I had to devise my own way to fix it.
I don't know if brightness is an issue.
View detail
Fits: KAWASAKI ZZR250, KAWASAKI ZZR1200, HONDA VTX1800, KAWASAKI ZX-12R, KAWASAKI ZX-11, KAWASAKI ZRX400-2, HONDA CB1300SF, HONDA CB1300SF, HONDA CB1000R, HONDA CB1000SF, KAWASAKI ZRX1200, KAWASAKI ZRX1100, KAWASAKI ZEPHYR1100, KAWASAKI ZR-7, KAWASAKI Z1000MK2, KAWASAKI Z400GP, KAWASAKI Z1, KAWASAKI W800, KAWASAKI W650, KAWASAKI NINJA250SL
It's not bright!
I saw the imp and thought it would be Large sturdy, so I bought it.
It is only a little brighter than Halogen bulb.
In addition, the Base and Body are fixed weakly by O-ring, so there is a fear that the optical axis will gap.
View detail
Fits: HONDA CB500F, HONDA CB750K6, HONDA CB750K5, HONDA CB750K4, HONDA CB750K3, HONDA CB750K2, HONDA CB750K1, HONDA CB750K0, HONDA CB400T, HONDA CB400F, HONDA CB350F, HONDA CB250T
Oh, no!
You can't do this!
It's cheap, sure, but ….
I put it on my OEM Blinker, but I had a bad feeling when I put it on. It doesn't tighten up properly and it's a bit squishy.
If water gets in, the inside will Rust.
If it is Ripro each other, it may be good, but if you buy only Lens, it may be safer to buy Body set.
It looks better, but it's expensive to Rust, so I'm sealing it. I am very disappointed.
View detail
With automatic lights-out function?
It turns on properly when the Engine is turned on, but it turns off naturally in 3 to 4 minutes. 。 If I turn the Engine off and on again, it turns on again, but then turns off again.
Looks like it has an automatic lights-out function. 。 This is for people with an average running time of 2-3 minutes.
View detail
Fits: SUZUKI GSX-R1100 (GU74A), SUZUKI GSX-R1100 (GV73A), HONDA CBR250RR (MC22), HONDA CBR250R (1-light vehicle MC41), HONDA CBR125R (JC50), HONDA CB750 (RC42), HONDA CB650F (RC83), HONDA CB400SS (NC41), HONDA CB400X (NC47), HONDA CB400SF (NC42), HONDA CB400F (NC36), HONDA CB400F (NC47), HONDA CB400SF (NC39), HONDA CB250F (MC43), HONDA CB1300SF (SC54), HONDA CB1300SF (SC40), HONDA CB1000SF (SC30), HONDA 400X (NC47), HONDA CB1000R (SC60), SUZUKI GSX-S1000 (GT79B)
VT250 SPADA can't be pimped out.
It is written that it corresponds to H4 Valve, but it is inaccurate and it is not possible to install it without removing it to some extent with File, and it doesn't fit in the Headlight because it is larger than the original bulb, and the Light and Bracket are quite loose. It was.
Those of you with VT250 SPADA may be able to use this product if you replace the headlight itself.
View detail
The USB connection port part is too large …
I tried to install it on the Z1 for my phone
Because the USB connection port part is too large, the
I couldn't install it in my preferred location on the Handlebar & hellip;
In the end, Daytona's 2.1A dedicated motorcycle power supply
USB(5V/2.1A)1 port has been replaced by part number 93039
View detail
I'm a cheapskate
The product description said it could be used with any type of engine, so I put it on a 2-stroke engine and it turned twice as fast Number, it was non-responsive to the two strikes!
It's like throwing away the cost of goods and labor (Angry!)
I'm not going to cry..
View detail
Both 3 KJ and 3 KY are listed in the compatible model column, but ...
Both 3 KJ and 3 KY are listed in the compatible model column, but as you can see from the product photo, this is a Blinker lens for 3 KY, which is different in shape from 3 KJ. Impossible to install. View detail
Fits: HONDA CBR954RRR, HONDA CB1300SF, HONDA CBR1000RR, HONDA CBR600RR, HONDA VTR250
As a result it was installed but the strength?
The appearance is the same as OEM Product, but because Screw locking boss is 90-degrees gap with OEM Product, it can not be installed as it is.
Because it is a non-refundable item, I cut a part of the boss with Cutter and installed it. I can not recommend it for those who wish to add a pump.
Us usual year year CB1300SB, but SF / Please note that ST also has the same OEM Parts Number number.
View detail
It is not LED compatible.
Impression of the former one "light bulb 1 pc. It blinks if it is connected ", but the bulb Quantity : 2pc. Set+LEDQuantity : 2pc. When connecting with Set, it turned on without blinking. It was a loss of cheap buying.. View detail