Reviews
Fits: KAWASAKI Zephyr 400, KAWASAKI Zephyr χ, KAWASAKI Zephyr 750, KAWASAKI Zephyr 750RS, KAWASAKI Zephyr 1100, KAWASAKI ZRX400
Very Cool!
These are great. Exactly as-advertised, no trouble fitting them, and they look good. I bought them for and fit them to my 1990 Kawasaki ZR550 Zephyr, and I'm very happy with them. The stock luggage hooks are fine, but I like having these better. They still work with my cargo net, and if I need to manually lift the back end of the bike up to rotate it in my tiny shop, I feel confident grabbing these to do it. Zero complaints. View detail
Rear looks great!
The Rear of the Left Side of the MONKEY was lonely, so I replaced it with this product and now the Rear is Polished and looks great! (^^) /
The quality of the plating is good, not only on the front side but also on the reverse side, and the entire surface is polished.
I am glad I bought it because it is reasonably priced and looks very different.
View detail
More than the price
Purchased for SUPER CUB110 (JA59).
Machining accuracy is quite rough. (Sweat)
But I was able to install it without any problems,
ShieldBody was Beauty when the protective film on both sides was removed.
It is good to keep the wind out of the room.
I am Large satisfied with this price.
View detail
Bolt is highly universal and can be used for various purposes other than Screen.
[How is it used?
I purchased the OEMPin that holds Screen to Cowl because it was getting tired with age, but I had a few left over and decided to use them for another purpose.
Was the one you received as per Image?
The product was just as bright Blue alumite as the image in Webike's product introduction section, and the color was exactly as shown in the Image with almost no difference in color.
Was the installation difficult?
When used for Screenetc., the OEM fixed pin (Rivet?) may need to be removed depending on the car model.
It takes some time to remove the OEM parts that are not Bolt type.
Once you have finished removing it, it is easy to fix using this product.
If you simply want to use it as a 5mmSize Bolt, it is even easier to simply replace it with the part that uses the OEM 5mmSize.
How was your experience with it?
Although not much time has passed since I started using it, I have not seen any fading, which is common with anodized dyed products.
Since it is a 5mm size bolt, it is not used often except for the Screen, but since a 5mm bolt was used as part of the exterior fixing of the Little Cub, the extra bolt was used to fix it in place.
Since the material is aluminum, it is not suitable for places where high additions are applied, but it works well enough for places where the exterior is fixed.
[Included Parts:were they on?
Material:Bolt of Aluminum with 2 Washers of Nylon and Well nut Quantity:Set contains 10 pieces.
[Was there anything that disappointed you?
If you can use it as described above, you can save money because there is a surplus even if you use it for screen depending on the type of car.
Other items that would be helpful
Point and hang of installation
Unlike steel or Stainless Steel, Aluminum is a soft material. When tightening or unfastening, insert the Hexagonal Wrench firmly and work carefully.
[Availability and clarity of the Instruction Manual
No Instruction Manual is available
Bolt and Nut's Quantity in a nutshell.:It is a Set, a very straightforward product.
[Notes]
As I said above. Proper Torque Management with Proper Tools." Anodized dyes and anodized dyes will inevitably fade under ultraviolet light, so if the dyes are not to be used for a long period of time, it is advisable to cover them with a body coverretc. to cut the UV rays.
[ITEMS TO BUY TOGETHER
If you want to use it to fix the screen when replacing the screen, use a new screen; for other uses, use a new screen. . the goods that will be required for its use." at the same time, you can save on shipping costs.
[Opinions and requests to Manufacturer
Please continue to sell this product as long as possible as it is easy to use.
View detail
Good value for money.
Good fitting product. Looks great. As per the manufactuers advisory- The powder coat has minor chipping/damage on one of the mounting brackets. But this is a minor issue and isn't visible once the rail has been fitted. View detail
Incredible value
Bought the Doreme bodykit, had it sprayed myself ,my Zephyr 750 looked great but I felt something was missing so I bought this chrome Madmax front fender to replace the original painted Zephyr front guard. WOW what a difference! If I say so myself my bike looks fantastic now a real head turner, this guard is not metal or chrome but still fits and looks incredible. Top marks to Webike for great price and fast delivery too. View detail
MONKEY125 pica.
The manufacturing is also OEM Product and Exactly and there is no problem with the plating process and there are no scratches. View detail
Same Black, different color.
Quantity because the same BlackCarbon has a slightly different color.:2pc. I ordered a set and customized the colors.:1 Set of 3pcs. in different colors. View detail
The color varies from Manufacturer to Manufacturer.
Same model, same BlackCarbon, but different shades.
So Quantity:2pc. Buy Set and attach Accent.
Next time I want to buy a pure Black.
View detail
Arrival of goods
I received the product. It was exactly what I ordered with no problems. Thank you very much. View detail
Great replacement for Factory cap
I bought this to replace the factory fuel cap for my 1995 Honda Super Cub. It fits exactly, and looks brand new. The rubber seal under the cap seems larger than factory but I have yet to have any issues with the cap. Mine arrived very shiny and without any scratches or blemishes. I think the only way someone could tell that this wasn't the factory Gas Cap is due to the fact it uses a non Honda Key. Highly Recommended. View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Wow that's cool
Carbon Style so it will be dressed up.
It is an easy product to apply and gives a custom feel.
The double-sided tape makes it easy to install, and the quality is good for the price.
View detail
Easy to use
I bought this for Screen bolt's Spare.
It is painted so it will not rust and is of the same etc. or better quality as OEM.
If the quantity isQuantity:1 Set of 10pcs. included a Hexagonal Wrench, so installation was no problem.
View detail
It's good for Racer replica.
Shop etc., but the product itself is the same only by the difference of the selling company. Shop, but the product itself is the same. I licked my head using the Hexagonal Wrench that came with it. For the GJ21A, I only used the Bolt and not the Rubber BushNut (because it looks weird). View detail
I'll save you an OEM Carrier too!
After a lot of Customing, I finally decided to go back to the Normal look and put on the Carrier that you guys remove!
good point
I don't do it, but I think it's good for those who load Box and so on.
I think Carrier is the right choice for CUB. It fits well.
I noticed again that the original Design was excellent.
The Carrier is good as a Cover because the area around the Rear blinker is bare of Wiring.
A bad point
Not particularly.
The OEM Carrier is the best choice, but it is quite expensive, but the strength and quality are excellent. It's a working motorcycle, so it's well designed.
But this product is neat too, you know.
A thin coat of 556 or similar on the rustproofing will hold it!
View detail
Used for free rides!
HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride, which have been doing a great job on the forest road touring. Seat has been done recently, so I put this product on it and made it beautiful! View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Best
I like CarbonLarge, so Material:I bought this one from Carbon Style and it's good
Not badly made and very inexpensive, so I got a great deal!
If it deteriorates, I will buy it again
View detail
Big Li in a better way than I expected
I used it on my SEA BASS DR250R
It was a used car in poor condition and the Seat was torn to shreds
When I peeled off the outer layer, I was surprised to see 3 layers of surprise & hellip; lol
It seems to have been forcibly repaired over the course of its long history
This time I was worried about OEM and DACHI Seat Cover, but it is a good price, so I was super I bought a cheap Mad Max Off-road Vehicle Seat Leather It was
The seat and the SIDE are separate from each other, with the seat surface being the normal leather and the SIDE It was punching leather
Cutting is also considered, and the seat of the Off-road motorcycle is unique to the It is designed to form a triangle when viewed from the right side
Because it is made to the Large texture to some extent, I think it is acceptable if there is a little anchoring
You may be able to limit the perfect Triangle Seat if it is 250cc class
Or perhaps the distance required in front and back would be shorter if you made it a triangle?
I used a Dryer to warm it up and a HandTucker to fasten it
First of all, position the front and back and snap with the HandTucker
From there, you can go laterally, diagonally and Quantity:Pair (for Left and Right) It was decided rather nicely when I fastened it to the uniform etc
If you pull too much, the Seat base will warp and go away, so only Wrinkle You just need to be careful about pulling a good pull without looking
In the unlikely event that it warps too much, you can remove one of the front and back and re-fasten it once
There will be some Wrinkle in the corners, but it's acceptable for poor amateur repairs
This is a recommendation for those who can't afford an external Seat or an OEMSeat Cover
In addition, it does not seem to have been treated with waterproofing, so there is no quantity:If you stop the 1pc.Vinyl, the Seat sponge will be hard to submerge in water
View detail
Fits: SUZUKI Universal, SUZUKI Universal
Improved look and feel
I bought it for my GSX1400 and the appearance around the tank cap has changed
I wasn't expecting it because it was easy to get a Gold amount, but it felt good
All you have to do is stick it on with double-sided tape, so it's easy to finish
Repeatedly a good product
View detail
High quality at a low price!
I wasn't expecting it to be $270, but it was better than I expected!
It's Carbon Style and looks good looking The adhesive surface wasn't bad either
I recommend it!
View detail