Reviews
Fits: HONDA CROSS CUB50, HONDA CROSSCUB110, HONDA CROSSCUB110
NORMAL Screw is lame, right?
I wanted to replace the NORMAL Screw because it smelled like a potato, but I didn't like the gear-like Knob from another Manufacturer.
I decided on this one, because it is a Round Type, which has the drawback of being slippery when turning it, but it was Large and durable when I was wearing Gloves, which prevent my fingertips from slipping. If it is not wet, you can turn it with bare hands. If you are looking for practicality, the gear-shaped Knob is definitely easier to turn, but I decided to go with this one because of its looks.
I love it
View detail
Mounted on MONKEY
It was mounted on a MONKEY and matched with Marshall Headlight.
The color is slightly different from the OEM color, but it doesn't bother me that much.
I am satisfied with the look and finish of the Race ish.
Some modification to widen the mounting holes is required for installation.
I think the work is not so much of a problem.
View detail
Screen bolt
I think it looks good.
However, the Black paint was bald when I installed it, so I fixed it with Touch pan.
View detail
Fits: HONDA SUPER CUB 50, HONDA SUPER CUB70, HONDA SUPER CUB 90
Quantity:2pc. Buy Set #2!
CUB90 (Tas ManiaGreen Light) with Black in Tallallol
CUB PRESS (Navy) with DiagramQuilt's Brown!
Seat color also changed with the color of the car body (laughs)
It's not easy to do something like this unless you buy Other Brand Product!
If you buy a used body and the Seat is a wreck.
This is cheaper than reupholstering, and Sponge and the skin are brand new!
If you don't care about OEM, this is definitely the one!
View detail
To install a mediocre Cowl on the HORNET
I bought this to install a mediocre Cowl on my HORNET 250.
I originally tried to install it with a Bolt from Home center, but they didn't have a good one that I could substitute, so I ended up with this one lol.
The result was easy to install and I am very happy with the results.
It needs to be adjusted so that the optical axis is not Gap, but I think that even a beginner can do it easily.
View detail
cheap
It's a collection of things you can get at Rose at Home center and other places, but I think it's better than buying Rose because it's Reasonable. It was also a good tip for buying other things with fine tuning. View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
It gives it a custom look
This is a carbon style dress-up with a bit of a custom look, and it's easy to attach with double-sided tape. View detail
It was a lighter gold color than the picture.
Quantity:1 Set of 10pcs. and comes with Nylon washer and RubberNut.
In terms of length, it was an Exactly Size for the Screen fixation of GPZ900R.
Excess Quantity:2pc. Set is used to connect the inner cowl to the front cowl.
This one was also perfect for the length and the ease of use of RubberNut.
There was nothing wrong with it functionally, but the color of the Anodized
The only thing I regret is that it was a bit pale gold, unlike the picture.
View detail
I only use Bolt..
I used the Bolt only because the Bolt was a little less than I thought it would be (That's my own miss-take, I didn't use Walnut.)
Since the Bolt of OEMNORMAL has deteriorated because of the resin, it has been changed to Aluminum I made it into Bolt
I think that the texture is not bad, but the diameter of the bolt is a little more for the bolt hole of Screen I think it would be better if it was large and low in height
I managed to fix it in place, so the result was unexpectedly good I was able to secure it just right and securely with Color and Nut
It's probably more light-resistant than the resin OEM Normal bolt, and it looks newer and more natural But I thought it was a small part, but it was a little newer than I thought it would be I think it's a good idea
View detail
It's pretty bright
I'm happy with how it looks, it's cool and bright
According to my touring buddies, it's so bright at night
(I guess it depends on the angle of Number …)
The cable is quite thin
To prevent disconnection, the junction part should be fixed so that it doesn't move
When I pulled on Cable, the soldered part of the LED and Cable was broken It was
View detail
There was no problem
I used it to change Seat of SEA BASSDF 200
Although it was the first Seat Replacement, it was possible to change it without problems.
Just my arm is immature, but Seat's warped part can not fit well
I have become a Wrinkle by all means.
Heat gunetc. If you pull it while warming at
Because I did not have those tools I give up and I am on a ride while I can do Wrinkle
Sitting comfort etc. There is no particular problem
View detail
Screw is short for Africa Twin's Shield
Nut did not have any problem. Just Screen Length was 5 mm because Screen was thick.
The remaining Dress-upBolt will be diverted to others.
View detail
It is largely satisfactory.
Bolt's color is brilliant and beautiful.
I did not like the color of PlasticWasher because it was transparent, so I used OEM's BlackWasher.
Rubber's Well nut did not engage in the hole of Upper Cowl, so I used OEM's PlasticNut.
Bolt is Material : Because it is Aluminum, it feels a little fragile.
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Bolt Replaced because the hole is not open
Unfortunately the hole in the Bolt section was not open so I replaced it and tried it again. Unfortunately the hole in the Bolt section was not open so I replaced it and tried it again.
Unfortunately the hole in the Bolt section was not open so I replaced it and tried it again.
View detail
Anyway COSPA
Things have never been cheap, but it is meaningless for a cheap worse.
However, it is this item that wiped out such a thing.
Although the texture is inferior,
A little, it is too good for Makeover, it is dish.
There are also hole positions and easy to paste.
If you chicken and degrease the sticking surface,
Oh yeah it does not seem to peel off so often.
View detail
For Seat Replacement of old car
Crack found in Seat of RD 50. Since it is a car more than 30 years ago, parts are not supplied.
I bought it for Re-covering.
【What made you decide the purchase?】 There are many exclusive items, but Universal Product is few. I searched parts and found them.
【How was it actually used?】 Material is also firm and feel like.
【Was it difficult to install? (Hard parts case)】 Installation is now. I plan to reassign it as soon as the crack gets bigger.
【Please tell me the point of installation and hang (in the case of Hard parts)】 Can be replaced even with 100 Tucker
【Fit feeling and height when wearing - Please tell me the weight etc (Apparel case) 】 Color and texturing are also close to OEM, I think Fit.
[Is there anything I was disappointed about?] nothing special.
【Hope for Manufacturer - Please tell me if there are any improvement points】 I wish there would be exclusive items for RD 50. I think it is impossible - -.
【Have you compared items?】 None. I think that there are few Universal Products.
[Others] Any
View detail
Without this
Installation of Bikini cowl is installed using Bolt connecting Headlight and Bracket
To secure it firmly from the outside, it is difficult to use this Bolt.
With this, it will be securely attached.
I think the price is a bit expensive.
View detail
It was easy to change the image
I chose because the price was cheaper than the other Brand.
If you add this Cowl and not attaching it, Image will change considerably.
The installation was not so difficult if you purchased optional Bolt.
Especially, it did not interfere with somewhere, or there was no beeping sound.
View detail
Glowing License PlateFrame
Although it is sold also in Oakon, etc., Cost hardly changes. If you buy with an uneasy feeling in the Oakon that you can really buy it, you can rest assured that you can purchase it here very much. It is Acrylic in terms of goods, so I'd like to take time to see how durable it is.
View detail
Purchase buying Box
I purchased to buy a box, but it was also a price for the price as it is also in the Imp of the other person. OEM Product is expensive so we bought this cheap but we recommend OEM Product if you use it for many years. View detail