Reviews
Arrival of goods
I received the product. It was exactly what I ordered with no problems. Thank you very much. View detail
Great replacement for Factory cap
I bought this to replace the factory fuel cap for my 1995 Honda Super Cub. It fits exactly, and looks brand new. The rubber seal under the cap seems larger than factory but I have yet to have any issues with the cap. Mine arrived very shiny and without any scratches or blemishes. I think the only way someone could tell that this wasn't the factory Gas Cap is due to the fact it uses a non Honda Key. Highly Recommended. View detail
Exchange for initial defects.
The design is good, but the plating is not very beautiful and the surface seems to be wavy. View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Wow that's cool
Carbon Style so it will be dressed up.
It is an easy product to apply and gives a custom feel.
The double-sided tape makes it easy to install, and the quality is good for the price.
View detail
Easy to use
I bought this for Screen bolt's Spare.
It is painted so it will not rust and is of the same etc. or better quality as OEM.
If the quantity isQuantity:1 Set of 10pcs. included a Hexagonal Wrench, so installation was no problem.
View detail
The shade is Beauty, but ……
I bought it from NORMAL, colorless BlackNut to One point Accent.
I only use 4 MC41's, so I'm not sure if I'll be replacing them for a few years………, but I'll be replacing them in less than a year.
The reason was the fading of Anodized.
At first, it was a deep gold color, but after one summer, it became a pale Lemon color.
It comes in a pack of 9, so I replaced the extra 4 this spring, but they started to fade again after this summer.
There is nothing wrong with it functionally, and considering the price, I don't see why not.
By the way, only Bolt was used in 41.
View detail
To install a mediocre Cowl on the HORNET
I bought this to install a mediocre Cowl on my HORNET 250.
I originally tried to install it with a Bolt from Home center, but they didn't have a good one that I could substitute, so I ended up with this one lol.
The result was easy to install and I am very happy with the results.
It needs to be adjusted so that the optical axis is not Gap, but I think that even a beginner can do it easily.
View detail
For spare parts
I got this for both Screen bolt and Cowl spare. The paint is very clean and the quality is as good or better than OEM. The quantity is Quantity:1 Set of 10pcs. and Hexagonal Wrench is also included, I think it is a good value Gold amount. View detail
It's good for Racer replica.
Shop etc., but the product itself is the same only by the difference of the selling company. Shop, but the product itself is the same. I licked my head using the Hexagonal Wrench that came with it. For the GJ21A, I only used the Bolt and not the Rubber BushNut (because it looks weird). View detail
I'll save you an OEM Carrier too!
After a lot of Customing, I finally decided to go back to the Normal look and put on the Carrier that you guys remove!
good point
I don't do it, but I think it's good for those who load Box and so on.
I think Carrier is the right choice for CUB. It fits well.
I noticed again that the original Design was excellent.
The Carrier is good as a Cover because the area around the Rear blinker is bare of Wiring.
A bad point
Not particularly.
The OEM Carrier is the best choice, but it is quite expensive, but the strength and quality are excellent. It's a working motorcycle, so it's well designed.
But this product is neat too, you know.
A thin coat of 556 or similar on the rustproofing will hold it!
View detail
cheap
It's a collection of things you can get at Rose at Home center and other places, but I think it's better than buying Rose because it's Reasonable. It was also a good tip for buying other things with fine tuning. View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
It gives it a custom look
This is a carbon style dress-up with a bit of a custom look, and it's easy to attach with double-sided tape. View detail
It was a lighter gold color than the picture.
Quantity:1 Set of 10pcs. and comes with Nylon washer and RubberNut.
In terms of length, it was an Exactly Size for the Screen fixation of GPZ900R.
Excess Quantity:2pc. Set is used to connect the inner cowl to the front cowl.
This one was also perfect for the length and the ease of use of RubberNut.
There was nothing wrong with it functionally, but the color of the Anodized
The only thing I regret is that it was a bit pale gold, unlike the picture.
View detail
Cheap prices!
It's a good first Custom because it's cheap and it looks, well, completely different.
Also, it would have been nice if the Bolt was a little longer.
View detail
Used for free rides!
HardEnduro, G650 XCOUNTRY, Enduro, KTM and Freeride, which have been doing a great job on the forest road touring. Seat has been done recently, so I put this product on it and made it beautiful! View detail
Fits: YAMAHA Universal, YAMAHA Universal
Bank of lodging money lost
It's a waste of your gold to buy it
I put it on myself and removed it in 30 seconds
Even though it's expensive, Dura*lt is definitely better
I immediately ordered that one later
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
Best
I like CarbonLarge, so Material:I bought this one from Carbon Style and it's good
Not badly made and very inexpensive, so I got a great deal!
If it deteriorates, I will buy it again
View detail
Big Li in a better way than I expected
I used it on my SEA BASS DR250R
It was a used car in poor condition and the Seat was torn to shreds
When I peeled off the outer layer, I was surprised to see 3 layers of surprise & hellip; lol
It seems to have been forcibly repaired over the course of its long history
This time I was worried about OEM and DACHI Seat Cover, but it is a good price, so I was super I bought a cheap Mad Max Off-road Vehicle Seat Leather It was
The seat and the SIDE are separate from each other, with the seat surface being the normal leather and the SIDE It was punching leather
Cutting is also considered, and the seat of the Off-road motorcycle is unique to the It is designed to form a triangle when viewed from the right side
Because it is made to the Large texture to some extent, I think it is acceptable if there is a little anchoring
You may be able to limit the perfect Triangle Seat if it is 250cc class
Or perhaps the distance required in front and back would be shorter if you made it a triangle?
I used a Dryer to warm it up and a HandTucker to fasten it
First of all, position the front and back and snap with the HandTucker
From there, you can go laterally, diagonally and Quantity:Pair (for Left and Right) It was decided rather nicely when I fastened it to the uniform etc
If you pull too much, the Seat base will warp and go away, so only Wrinkle You just need to be careful about pulling a good pull without looking
In the unlikely event that it warps too much, you can remove one of the front and back and re-fasten it once
There will be some Wrinkle in the corners, but it's acceptable for poor amateur repairs
This is a recommendation for those who can't afford an external Seat or an OEMSeat Cover
In addition, it does not seem to have been treated with waterproofing, so there is no quantity:If you stop the 1pc.Vinyl, the Seat sponge will be hard to submerge in water
View detail
I only use Bolt..
I used the Bolt only because the Bolt was a little less than I thought it would be (That's my own miss-take, I didn't use Walnut.)
Since the Bolt of OEMNORMAL has deteriorated because of the resin, it has been changed to Aluminum I made it into Bolt
I think that the texture is not bad, but the diameter of the bolt is a little more for the bolt hole of Screen I think it would be better if it was large and low in height
I managed to fix it in place, so the result was unexpectedly good I was able to secure it just right and securely with Color and Nut
It's probably more light-resistant than the resin OEM Normal bolt, and it looks newer and more natural But I thought it was a small part, but it was a little newer than I thought it would be I think it's a good idea
View detail
Fits: KAWASAKI Universal, KAWASAKI Universal
The price..
I purchased this for a low price but the size is small as others have written I am not satisfied with it It is a shame View detail