Reviews
It attached to KLX125. Although it is the die length to the extent that a Lever is cut with 2 or 3 finger, when it is me, since it is 2 fingers, I think whether I may be short to a slight degree. Structure of Design nature may also be comparativ
It attached to KLX125.
Although it is the die length to the extent that a Lever is cut with 2 or
3 finger, when it is me, since it is 2 fingers, I think whether I may be short to a slight degree.
Structure of
Design nature may also be comparatively solid quite well.
Since
height control can also be performed, this product is recommended very much.
View detail
It is recommended at a person with a small hand (person with a short finger). Although ninja 250r was ridden with the pure Lever, the left hand has become painful by operation for about 3 hours. It is comfortable after changing the
It is recommended at a person with a small hand (person with a short finger).
Although
ninja 250r was ridden with the pure Lever, the
left hand has become painful by operation for about 3 hours.
It is comfortable after changing the
Lever.
View detail
Fits: HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA LIVE DIO, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA TACT, HONDA DIO (2Cycle), HONDA DIO (2Cycle), HONDA DAX, HONDA DAX, HONDA DAX, HONDA TACT, HONDA ZOOK, HONDA ZOOMER
When stopping at a slope, he has forgotten to put a GEAR into a low, and in order for a Side stands to separate and to have made it fall, the Clutch lever broke. As compared with the estimate of Honda brand-name parts, since this product was cheaper, it
When stopping at a slope, he has forgotten to put a GEAR into a low, and in order for a Side stands to separate and to have made it fall, the Clutch lever broke.
As compared with the estimate of Honda brand-name parts, since this product was cheaper, it purchased.
I think that it is shorter than brand-name parts about 3 cm if it attaches.
Since it is an APE, it is convenient, but a left hand may get tired if it is a vehicle type with a heavy Clutch.
It seems that I will think that it can turn out that form is a little different if you see the
picture, but it is satisfactory for the moment.
(Left-hand side is this product)
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Attachment was also able to be simplified. .. Since it says that removal of the pure Lever attached from the first is old, it has a close game. [ ] I think whether it can do, if there is even no it and is as long as 20 minutes.
Attachment was also able to be simplified.
.. Since it says that removal of the pure Lever attached from the first is old, it has a close game. [
]
I think whether it can do, if there is even no it and is as long as 20 minutes.
I think that it can be satisfied with this price of this quality enough.
It is that the BALI of the portion on which that was uniquely [
] regrettable hangs a finger remained.
Since it is a grade lightly correctable by a Paper, there is no problem well.
View detail
PCX use is carried out by commuting. although a palm is warm at Grip-heater attachment -- the back of a fingertip and a hand -- a wind -- hit, and since it was cold, it attached. Although it was general-purpose article, it was a
PCX use is carried out by commuting.
although a palm is warm at
Grip-heater attachment -- the back of a fingertip and a hand -- a wind -- hit, and since it was cold, it attached.
Although it was
general-purpose article, it was able to attach like a photograph.
Although a Cowl is not contacted at the time of the usual handle operation and a Handle lock, when the
wheel is turned with all its might, it contacts for a while.
View detail
In the bottom, the position has passed in case of Pons attachment. According to a vehicle type, adjustment is required. By a car with Cowl, it hits a Cowl.
In the bottom, the position has passed in case of Pons attachment.
According to a vehicle type, adjustment is required.
By a car with
Cowl, it hits a Cowl.
View detail
Since a Mirror is once removed and attachment only fastens it together, it is easy. If it runs, the wind equivalent to a hand will be prevented firmly. The grade which is equivalent to a finger faintly although a wind is felt from the neighborhood
Since a Mirror is once removed and attachment only fastens it together, it is easy.
If it runs, the wind equivalent to a hand will be prevented firmly.
The grade which is equivalent to a finger faintly although a wind is felt from the neighborhood of the
wrist.
Although it is not OK only for
Colet, I think that the cold of a fingertip will be reduced if attached.
Although it was cheaper than goods besides
, if structure is solid and breaks immediately, there is likely to be. [ no ]
especially although the
high speed also ran, he has no problem! Although I think that it
Sees and the tastes of a sake are based on people, it is like [ a rabbit ] an ear individually and is lovely.
Although it runs also in the winter of
, an alder Cover is a Recommendation at a slightly -- person.
View detail
Fits: YAMAHA JOG90, YAMAHA JOG, YAMAHA AXIS 90, YAMAHA AXIS 50, YAMAHA JOG ZS 3YK1-B YG50Z|ZS|EX|Zr, YAMAHA JOG Z, YAMAHA JOG Zr, YAMAHA JOG APRIO Type 2, YAMAHA MAJESTY125, YAMAHA JOG ZS 3YK1-B [Fitting Information] YG50Z|ZS|EX|ZR, YAMAHA Majesty 125, YAMAHA Axis 50, YAMAHA Axis 90, YAMAHA jog, YAMAHA Jog 90, YAMAHA Jog Z, YAMAHA Jog ZR, YAMAHA Jog Aprio Type 2
[ -- the Webike Monitor ] -- there is also what no problem and it has used it.Since the price is also cheap, it is satisfactory.
[ -- the Webike Monitor ]
-- there is also what no problem and it has used it.Since the
price is also cheap, it is satisfactory.
View detail
Fits: SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI ADDRESS V50(2Cycle), SUZUKI LETS II (2Cycle), SUZUKI VECSTAR125, SUZUKI VECSTAR150, SUZUKI LETS II (2Cycle), SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI SEPIA, SUZUKI AVENIS150, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100, SUZUKI ADDRESS V100
[-- the webike Monitor] -- it is very common.There is no change at all with brand-name parts.I think that it excels in the Cost performance.
[-- the webike Monitor]
-- it is very common.There is no change at all with
brand-name parts.I think that it excels in the
Cost performance.
View detail
[Webike Monitor] It purchased in order to attach to TW225 at the beginning, but since attachment was impossible unless it uses a Stay, it attached to CB1100. Pons attachment is possible when it is CB1100. A Clearance with a Lever is also satisfa
[Webike Monitor] It purchased in order to attach to TW225 at the
beginning, but since attachment was impossible unless it uses a Stay, it attached to CB1100.
Pons attachment is possible when it is
CB1100.
A Clearance with a Lever is also satisfactory.
Thing is a thin Smoke although
goods picture seems to have a fairly tight Smoke.
Each part is solid considering the
price, and it was thought that they were goods far better than imagination.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
Since something was a cheap Lever [ やたら / as a Lever with an Adjust ], it purchases to a trial. Although felt like not matching well in character, it attached to the ZEPHYR750. The beam touch with and processing accuracy have attached easi
Since something was a cheap Lever [ やたら / as a Lever with an Adjust ], it purchases to a trial.
Although felt like not matching well in
character, it attached to the ZEPHYR750.
The beam touch with
and processing accuracy have attached easily so bad.
a motion of
Adjust part is also satisfactory, and since there is also thickness of a Lever so so, it is satisfactory at all on use -- it is .
A not much expensive Lever is a Lever which ... and those which it hesitates can recommend to you.
However, it is not necessarily large satisfaction.
Although it says that it is dissatisfied or is touch as this is regrettable, a METAL and a Bearing have no portion which becomes an axis first.
The Miniature Bearing is contained in case of an expensive Lever.
Although not expected, I wanted you to put in a true 鍮 METAL up to there, since it is a cheap Lever truly.
Next.
If it falls, it will be モゲ る from the Lever origin.
In order to usually avoid a Lever total loss in an emergency, the cut is contained so that it may become weak purposely in the direction of a tip, but there is no it.
I wanted you to put this in.
The 3rd is a color.
I all wanted black.
Although only the
Adjust lever is a red Anodized, does it float depending on the character of a Motorcycle?
Main Motorcycle was also putting in the Short lever, and since the Two Finger was established, both hands were that there is considerably nothing comfortable [ operation ].
Probably, they are inexpensive goods enough, if it is this quality in this price range.
Is it unsuitable for the direction which asks for
engine performance?
やっぱ.
View detail
Fits: HONDA MAGNA(V-TWIN MAGNA), HONDA MAGNA(V-TWIN MAGNA), HONDA CB400FOUR (water-cooled), HONDA MAGNA50, HONDA MAGNA50, HONDA MAGNA50, HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA REBEL(-1999), HONDA VT250 INTEGRA, HONDA VT250 INTEGRA, HONDA VT250 INTEGRA, HONDA VT250 INTEGRA, HONDA VT250 SPEdition 86-88 (FG), HONDA VT250 SPEdition 86-88 (YA), HONDA VT250 SPEdition 86-88 (FG-YA), HONDA VRX400 R100 ROADSTER, HONDA VT250 SPEdition 86-88 (F2H), HONDA NS-1, HONDA SHADOW400
It is purchase because of exchange of the Lever by fall. It is preeminent for the Cost performance. I think that it is as good the result as it becomes foolish to buy the original manufacturer's product. I think that I will add to m
It is purchase because of exchange of the Lever by fall.
It is preeminent for the
Cost performance.
I think that it is as good the result as it becomes foolish to buy the
original manufacturer's product.
I think that I will add to my purchase to a Stock since there is much practice accompanied by the
fall.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
Compared with a pure Lever, it is short, and since it can adjust far [ of a Lever ], the Position which comes exactly can be taken. The form of a Lever is square and a grip feeling is merely bad. The price thinks that it is the goods which
Compared with a pure Lever, it is short, and since it can adjust far [ of a Lever ], the Position which comes exactly can be taken.
The form of a Lever is square and a grip feeling is merely bad.
The
price thinks that it is the goods which were excellent in COSPAR at a low price.
View detail
Although attached to KLX125, -- in two Hand guards which I have -- -- making and attaching an about 10-mm short pipe to an End grip reluctantly -- -- it attaching somehow and also by , Troubles are likely to be suffered when
Although attached to KLX125,
-- in two Hand guards which I have --
-- making and attaching an about 10-mm short pipe to an End grip reluctantly --
-- it attaching somehow and also by
,
Troubles are likely to be suffered when running between the tree in the
mountain, a tree, a bamboo, and bamboos, since Handle width became long 20 mm or more.
View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
It is good shopping except a person with a disagreeable Short. Although there is shakiness a little [ ], at the time of operation, it is not worrisome. considering the price, buying it -- it is -- !.
It is good shopping except a person with a disagreeable Short.
Although there is shakiness a little [
], at the time of operation, it is not worrisome.
considering the
price, buying it -- it is -- !.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
It was used for XELVIS which I had ridden before. Although a product which was alike are also sold from the other company, a price is reasonable and it is good for a poor rider like me. It was perfect and good shopping.
It was used for XELVIS which I had ridden before. Although a product which was alike are also sold from the other company, a price is reasonable and it is good for a poor rider like me. It was perfect and good shopping. View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I
"I was charmed by the coolness of the appearance and purchased. It arrived and I attached instantly. However, I felt uncomfortable that I grasped. Although the lever of AREBA was attached until now, this lever missed something. As for the grip feeling, I feel an angle hits strongly and it is not good. When I grasp, it hits immediately the third finger and the little finger which are holding the grip, and it hurts. It seems that it does not suite the form of my hand somehow. Since texture is good, it is regrettable." View detail
Fits: KAWASAKI KLE250 Anaero, KAWASAKI Z750 (water-cooled), KAWASAKI Z750S (water-cooled), KAWASAKI ZR-7/S, KAWASAKI ZX-9R, KAWASAKI EX-4, KAWASAKI KLE250 Anaero, KAWASAKI KLE400, KAWASAKI ZX-6R, KAWASAKI ZXR250, KAWASAKI ZXR400R, KAWASAKI ZZR250, KAWASAKI ZZR400, KAWASAKI Estrella RS, KAWASAKI Australia, New Zealand and the United States, KAWASAKI Zephyr 400, KAWASAKI Zephyr X, KAWASAKI Vulcan 400, KAWASAKI ZRX400, KAWASAKI ZRX400II
It attached to ZZR250 instantly. The relation Response and Position of the Clutch at the time of real run could also be set up finely, and I have satisfied them. You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I ha
It attached to ZZR250 instantly.
The relation Response and Position of the Clutch at the time of
real run could also be set up finely, and I have satisfied them.
You are easy to treat the one where the Lever itself is longer (+10~15 mm). Although I have also said the Design well to mind, doesn't the back become for a while?
pure [ like a Clutch / in brake operation ] in case of the present Reach -- because it is shorter, rather than former, grip will be needed and a Stress will be felt.
View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good to
Since lever handling was performed by an index finger and the two middle fingers, and a difference with an exactly sufficient Short lever was adjusted to six steps, the one where a hand is smaller was also able to simplify attachment which becomes good touch. View detail
Fits: HONDA AX-1, HONDA CB-1, HONDA CB400FOUR (water-cooled), HONDA CB400SS, HONDA CB750, HONDA CBR400F, HONDA CBR400RR, HONDA CBR750, HONDA VT250 Spada, HONDA VTR250, HONDA VTZ250, HONDA jade, HONDA CB400 SUPER FOUR, HONDA GB250 CLUBMAN, HONDA VRX400 R100 ROADSTER, HONDA VT250 INTEGRA, HONDA SHADOW400, HONDA SHADOW750, HONDA Shadow slasher400, HONDA STEED400
It attached to the HONDA xelvis. They are completely dress-up parts. It was shorter than the pure lever, and since far regulation of a lever was also completed, 2 finger control became easy. However, it compared that it was pure and the portio
It attached to the HONDA xelvis.
They are completely dress-up parts.
It was shorter than the pure lever, and since far regulation of a lever was also completed, 2 finger control became easy.
However, it compared that it was pure and the portion which is in contact with the master cylinder is sticking out greatly.
Gatun and a brake came to be effective only by grasping lightly probably for the reason.
If those who are operating it by three in four [ /] from usually use nothing for not knowing, a front lock may be carried out simply.
After changing into this lever, it changed to 3 operation -> 1 operation.
It and a grip feeling may not be so very well.
If it is used empty-handed since it is a thick and square lever, a finger hurts.
since what is necessary is just to carry out a glove, it is not caring, either -- it is more than ?.
considering a price, it is solid, and since appearance is also smart, it can do easily -- custom -- we carry out and it is recommended.
View detail