Reviews
Can't hold the nail open.
[How is it used?
I used this to replace the Clutch boss on my MT-07.
Was the one you received as per Image?
This is a general Clutch holder. There are several companies that sell the same shape.
How was your experience with it?
The pawl tip format is bad, and when Torque is applied, the Y-shape spreads and the pawl comes off. There is a screw type stopper to control the spread, but it is defeated by Torque.
The reason it spreads is that the tip of the nail is cut at an angle to fit easily into the groove of the Clutch boss.
I had to tighten the Stopper with a water pump ply shop to get it to work. I don't think that's the way it should be used.
[Points to note]
The Clutch boss has a high fastening torque, so if it comes off you could get hurt.
View detail
Bolt On is not an option.
I thought it looked sturdy, but when I put it together, the center was gapped and the screw holes were half off.
Also, all four of the Loader Hooks were welded at an angle … you should have made them a little better! It took me about 2 hours of tapping, bending, and scraping the cutouts while complaining about it.
My advice to buyers, if you can't fix it yourself, it's best to avoid it.
View detail
Fits: HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund, HONDA monkey, HONDA gorilla (Gorilla spp., esp. western gorilla, Gorilla gorilla), HONDA dachshund
It's Chinese, so it's probably like this.
It's cheap, but the processing is not good at all.
However, it is not so that the performance is not good, and I do not know well because it is after I fix it by myself, but I can use it normally.
You might be better off buying a cheaper Chinese product from Large Hand Mail Order Site.
View detail
The strength of the product is reliable.
The price may be a little cheaper, but for the appearance, it is strong and durable. You can pull the hard spring and prevent the exhaust system from being scratched and you can use it safely. View detail
Fits: HONDA MONKEY, HONDA GORILLA
I didn't Match Tank.
I'm not sure if this is a good idea or not. View detail
I use it as a Right Side Cover.
I used it to fill the gap of Right Side because I made Down Type Exhaust System.
I put the OEM Sticker on it so it looks OEM.
View detail
Fits: HONDA APE 50, HONDA GORILLA, HONDA MONKEY
You can't see it, so this is enough.
It is a part that is hidden in the tank, so I personally think it is possible to use Other Brand Product.
Best of all, the prices are reasonable!
View detail
Almost no change from OEM
I used it for my MONKEY.
Nothing different from OEM. I have no complaints. If I had to say, I think the surface treatment is a little cheap, but I haven't seen any rust floating around after 6 months of use.
I was worried about the roughness of the accuracy made by Large land because it is cheap, but there was no problem with the screw thread and Beauty.
If I had to say something, I would say that it comes in a Vinyl bag, so distortion and scratches are a bit of a concern. However, if you are sensitive about it, you should look for a domestic manufacturer.
View detail
Can be used without problems
Function and workability are fine, but
The part that suppresses Piston is Knurl by the genus Gold, so it scratches the inside of Piston.
If you are worried about it, you need to take measures such as putting Dustcloth in between.
View detail
It was not compatible with the 2021 New Model Grom.
I checked with the Manufacturer before I bought it, and they said it would fit the 2021 New Model Grom, but when I did the installation work after it arrived, the shape didn't fit. (*_*)
It will fit the current Grom but not the 2021 Shingo.
I distrust the Manufacturer's lax response.
View detail
Be sure to check the fit of the bearing!
Installed on MONKEY125
I didn't like the squishy feel of NORMAL, so I installed this product.
Pushing feeling has been changed and the direct feeling of Shift has been improved.
However, please note that the bearing press fit is a little weak, so be sure to check that the bearing is seated properly when installing.
I think it's cost effective!
View detail
U-shaped hook
I know it's a series of pitches, but I installed the RIDEA RIDEA Stand Hook yesterday and used it with a U-shaped hook.
It's more obvious than Swing ArmType, but it's totally stable.
However, it interferes with the bolt for hook fixation when the shaft is removed.
I removed the Bolt at that time because it won't come off once it's fixed in STAND.
U-shaped hooks can be used normally, so this is more PointUp than the last one.
But I still think it's too hard for a car with a lot of weight.
View detail
Shift feel has improved dramatically.
When I look at your reviews, it seems that each one feels differently, but I can feel the effect very well in my groms, and Shift change is settled pleasantly. View detail
Fits: HONDA glom, HONDA PCX150, HONDA PCX125, HONDA LEAD125, HONDA DIO110
It is easy to install
It is very convenient to start the engine with the side stand still in place. View detail
It's not bad
In order to install it, the bolt holes
There is some gapping and processing.
It was necessary.
Stand stopper Rubber.
It's too thick and the main stand is halfway between the two
I shaved off half of this one to come to a position.
View detail
Fits: HONDA MONKEY, HONDA MONKEY, HONDA MONKEY, HONDA MONKEY
To the DAX.
I bought it because I had accumulated a lot of points.
I don't run at night, so it was fine to leave it off separately.
But isn't it expensive? With one bulb.
View detail
Used for 12VMONKEY
I put a Fender on temporarily for a change of pace.
I'm going to buy the OEM Plating fender because it looks like a good atmosphere.
Cheap and for reference.
The Bracket is self-made in position.
If you buy a slightly expensive OEM and it's weird, it's a Shock, lol.
View detail
Used for 12VMONKEY
Originally it was the same color as the Body, but for the sake of the Me Chain.
I installed it as a test run and it looks good.
By the way, Small work was necessary to match the line with Tire.
So I'm going to buy an OEMFender.
It's only for Samples.
It's cheap.
View detail
I'm not complaining because it's cheap.
You should definitely work on it in water.
The prickle attacks all day long.
Also, it is hard to wind the R part because it is 50mm wide.
I still feel that about 30mm is a beautiful finish.
View detail
Fits: HONDA DAX, HONDA GORILLA, HONDA MONKEY
Cheap Gasket
MINIMOTO MinimotoExhaust System Gasket for MONKEY, DAX caught my eye, so I bought it on impulse this time
I think the quality of the product is reasonable for the price range
It's safe to say that you won't be disappointed by the amount of gold you buy, which is Large
It's not that bad of an impression I've had of it
I don't know if I'll continue to use it in the future, but I'm glad I bought it
View detail